From microporous to mesoporous mineral frameworks: An alliance between zeolite and chitosan.

Microporous and mesoporous minerals are key elements of advanced technological cycles nowadays. Nature-driven microporous materials are known for biocompatibility and renewability. Zeolite is known as an eminent microporous hydrated aluminosilicate mineral containing alkali metals. It is commercially available as adsorbent and catalyst. However, the large quantity of water uptake occupies active sites of zeolite making it less efficient. The widely-used chitosan polysaccharide has also been used in miscellaneous applications, particularly in medicine. However, inferior mechanical properties hampered its usage. Chitosan-modified zeolite composites exhibit superior properties compared to parent materials for innumerable requests. The alliance between a microporous and a biocompatible material with the accompaniment of negative and positive charges, micro/nanopores and proper mechanical properties proposes promising platforms for different uses. In this review, chitosan-modified zeolite composites and their applications have been overviewed.

ZnO Microfiltration Membranes for Desalination by a Vacuum Flow-Through Evaporation Method.

ZnO was deposited on macroporous α-alumina membranes via atomic layer deposition (ALD) to improve water flux by increasing their hydrophilicity and reducing mass transfer resistance through membrane pore channels. The deposition of ZnO was systemically performed for 4-128 cycles of ALD at 170 °C. Analysis of membrane surface by contact angles (CA) measurements revealed that the hydrophilicity of the ZnO ALD membrane was enhanced with increasing the number of ALD cycles. It was observed that a vacuum-assisted 'flow-through' evaporation method had significantly higher efficacy in comparison to conventional desalination methods. By using the vacuum-assisted 'flow-through' technique, the water flux of the ZnO ALD membrane (~170 L m-2 h-1) was obtained, which is higher than uncoated pristine membranes (92 L m-2 h-1). It was also found that ZnO ALD membranes substantially improved water flux while keeping excellent salt rejection rate (>99.9%). Ultrasonic membrane cleaning had considerable effect on reducing the membrane fouling.

Permselective H2/CO2 Separation and Desalination of Hybrid GO/rGO Membranes with Controlled Pre-cross-linking.

Covalent bonding is widely adopted in graphene oxide (GO) membrane to improve structural integrity and restrict swelling, while it comes with a price of enlarged d-spacing and sacrifices membrane selectivity. This work offers a facile strategy to break the trade-off between membrane stability and selectivity. Specifically, graphene oxide (GO)/reduced graphene oxide (rGO) hybrid membranes were fabricated by a controlled pre-cross-linking method. With this method, restricted swelling by cross-linking and reduced d-spacing by GO reduction can be achieved simultaneously by controlling reaction time. Membranes were prepared on porous alumina support by vacuum filtration method. Two different d-spacing values (∼12.0 and ∼7.5 Å) were found in the hybrid membrane, representing the layer structures of expanded GO interspacing with inserted cross-linker and reduced layer spacing after GO reduction. The presence of such mixed layer structures enables restricted swelling, excellent mechanical strength, and unique separation property. The hybrid membrane shows excellent permselective H2/CO2 separation with a separation factor of 22.93 ± 1.57 and H2 permeance of 2.46 ± 0.01× 10-8 mol m-2 s-1 Pa-1. In desalination test with 3.5 wt % sea salt solution, the hybrid membrane shows high ion (Na+, K+, Mg2+, Cl-, and SO42-) rejection rate of above 99%, as well as excellent durability.