Proteoglycans and glycosaminoglycans improve toughness of biocompatible double network hydrogels.

Based on the molecular stent concept, a series of tough double-network hydrogels (St-DN gels) made from the components of proteoglycan aggregates - chondroitin sulfate proteoglycans (1), chondroitin sulfate (2), and sodium hyaluronate (3) - are successfully developed in combination with a neutral biocompatible polymer. This work demonstrates a promising method to create biopolymer-based tough hydrogels for biomedical applications.

Double-network acrylamide hydrogel compositions adapted to achieve cartilage-like dynamic stiffness.

Since articular cartilage has a limited potential for spontaneous healing, various techniques are employed to repair cartilage lesions. Acrylate-based double-network (DN) hydrogels containing ~90% water have shown promising properties as repair materials for skeletal system soft tissues. Although their mechanical properties approach those of native cartilage, the critical factor-stiffness-of DN-gels does not equal the stiffness of articular cartilage. This study investigated whether revised PAMPS/PAAm compositions with lower water content result in stiffness parameters closer to cartilage. DN-gels containing 61, 86 and 90% water were evaluated using two non-destructive, mm-scale indentation test modes: fast-impact (FI) and slow-sinusoidal (SS) deformation. Deformation resistance (dynamic modulus) and energy handling (loss angle) were determined. The dynamic modulus increased with decreasing water content in both testing modes. In the 61% water DN-gel, the modulus resembled that of cartilage (FI-mode: DN-gel = 12, cartilage = 17; SS-mode: DN-gel = 4, cartilage = 1.7 MPa). Loss angle increased with decreasing water content in fast-impact, but not in slow-sinusoidal deformation. However, loss angle was still much lower than cartilage (FI: DN-gel = 5, cartilage = 11; SS: DN-gel = 10, cartilage = 32°), indicating somewhat less ability to dissipate energy. Overall, results show that it is possible to adapt DN-gel composition to produce dynamic stiffness properties close to normal articular cartilage.

Silicone breast implant materials.

This opinion article has been written on request because of the recent public controversy over silicone breast implants produced by a now-defunct company, Poly Implant Prosthese (PIP) in France. More than 300,000 PIP devices have been implanted. The purposes of my article are to (1.) provide a general overview of silicone breast implant materials, (2.) to describe the general safety of these materials as reported to date, and (3.) to summarise current publicly available information about these aspects of the PIP prostheses. The materials covered are the silicone rubber from which the implant shells are made and the silicone gel used to fill the shell. The materials safety issues are biocompatibility (especially of the gel) and biodurability of the shell. The literature reviewed indicates that biocompatibility is not an issue with other current generation implants. However, biodurability is. A rough estimate of implant shell rupture rate is ~10+% at 10 years. Information is still emerging about the PIP implants. Initial regulatory disclosures suggest the PIP implants may have both biocompatibility and biodurability problems. They also suggest that PIP implants may have been produced using silicone materials not certified as medical grade. Governmental health and regulatory agencies are just now in the process of deciding what actions should be taken to protect patients.

A comparison of healthy human and swine articular cartilage dynamic indentation mechanics.

Articular cartilage is a multicomponent, poroviscoelastic tissue with nonlinear mechanical properties vital to its function. A consequent goal of repair or replacement of injured cartilage is to achieve mechanical properties in the repair tissue similar to healthy native cartilage. Since fresh healthy human articular cartilage (HC) is not readily available, we tested whether swine cartilage (SC) could serve as a suitable substitute for mechanical comparisons. To a first approximation, cartilage tissue and surgical substitutes can be evaluated mechanically as viscoelastic materials. Stiffness measurements (dynamic modulus, loss angle) are vital to function and are also a non-destructive means of evaluation. Since viscoelastic material stiffness is strongly strain rate dependent, stiffness was tested under different loading conditions related to function. Stiffness of healthy HC and SC specimens was determined and compared using two non-destructive, mm-scale indentation test modes: fast impact and slow sinusoidal deformation. Deformation resistance (dynamic modulus) and energy handling (loss angle) were determined. For equivalent anatomic locations, there was no difference in dynamic modulus. However, the HC loss angle was ~35% lower in fast impact and ~12% higher in slow sinusoidal mode. Differences seem attributable to age (young SC, older HC) but also to species anatomy and biology. Test mode-related differences in human-swine loss angle support use of multiple function-related test modes. Keeping loss angle differences in mind, swine specimens could serve as a standard of comparison for mechanical evaluation of e.g. engineered cartilage or synthetic repair materials.

Application of a microcalorimetric method for determining drug susceptibility in mycobacterium species.

Mycobacterium tuberculosis is a global public health concern, particularly with the emergence of drug-resistant strains. Immediate identification of drug-resistant strains is crucial to administering appropriate treatment before the bacteria are allowed to spread. However, developing countries, which are most affected by drug resistance, are struggling to combat the disease without the facilities or funds for expensive diagnostics. Recent studies have emphasized the suitability of isothermal microcalorimetry (IMC) for the rapid detection of mycobacteria. In this study, we investigate its suitability for rapid and reliable M. tuberculosis drug susceptibility testing. Specifically, IMC was used to determine the MICs of three drugs, namely, isoniazid, ethambutol, and moxifloxacin, against three mycobacteria, namely, Mycobacterium smegmatis, Mycobacterium avium, and Mycobacterium tuberculosis. The Richards growth model was used to calculate growth parameters, namely, the maximum bacterial growth rate and the lag phase duration from integrated heat flow-versus-time results. For example, MICs of isoniazid, ethambutol, and moxifloxacin were determined to be 1.00, 8.00, and 0.25 µg/ml, respectively. IMC, as described here, could be used not just in industrialized countries but also in developing countries because inexpensive and sensitive microcalorimeters are now available.

Real-time measurements of human chondrocyte heat production during in vitro proliferation.

Isothermal microcalorimeters (IMC) are highly sensitive instruments that allow the measurement of heat flow in the microwatt range. Due to their detection of minute thermal heat, IMC techniques have been used in numerous biological applications, including the study of fermentation processes, pharmaceutical development, and cell metabolism. In this work, with the ultimate goal of establishing a rapid and real-time method to predict the proliferative capacity of human articular chondrocytes (HAC), we explored to use of IMC to characterize one of the crucial steps within the process of cartilage tissue engineering, namely the in vitro expansion of HAC. We first established an IMC-based model for the real-time monitoring of heat flow generated by HAC during proliferation. Profiles of the heat and heat flow curves obtained were consistent with those previously shown for other cell types. The average heat flow per HAC was determined to be 22.0 ± 5.3 pW. We next demonstrated that HAC proliferation within the IMC-based model was similar to proliferation under standard culture conditions, verifying its relevance for simulating the typical cell culture application. HAC growth and HAC heat over time appeared correlated for cells derived from particular donors. However, based on the results from 12 independent donors, no predictive correlation could be established between the growth rate and the heat increase rate of HAC. This was likely due to variability in the biological function of HAC derived from different donors, combined with the complexity of tightly couple metabolic processes beyond proliferation. In conclusion, IMC appears to be a promising technique to characterize cell proliferation. However, studies with more reproducible cell sources (e.g., cell lines) could be used before adding the complexity associated with primary human cells.

Direct cytotoxicity evaluation of 63S bioactive glass and bone-derived hydroxyapatite particles using yeast model and human chondrocyte cells by microcalorimetry.

In this study, the cytotoxicity evaluation of prepared 63S bioactive glass and bone-derived hydroxyapatite particles with yeast and human chondrocyte cells was carried out using isothermal micro-nano calorimetry (IMNC), which is a new method for studying cell/biomaterial interactions. Bioactive glass particles were made via sol-gel method and hydroxyapatite was obtained from bovine bone. Elemental analysis was carried out by XRF and EDXRF. Amorphous structure of the glass and completely crystalline structure of HA were detected by XRD analysis. Finally, the cytotoxicity of bioactive glass and bone-derived HA particles with yeast and cultured human chondrocyte cells was evaluated using IMNC. The results confirmed the viability, growth and proliferation of human chondrocyte cells in contact with 63S bioactive glass, and bone-derived HA particles. Also the results indicated that yeast model which is much easier to handle, can be considered as a good proxy and can provide a rapid primary estimate of the ranges to be used in assays involving human cells. All of these results confirmed that IMNC is a convenient method which caters to measuring the cell-biomaterial interactions alongside the current methods.

Evaluation of a low-cost calorimetric approach for rapid detection of tuberculosis and other mycobacteria in culture.

AIMS: The objective of this study was to evaluate the effectiveness of microcalorimetry in rapid detection of mycobacterium species using an inexpensive Isothermal microcalorimetry (IMC) instrument. In addition, we compared microcalorimetry with conventional monitoring techniques. METHODS AND RESULTS: Isothermal microcalorimetry measures heat production rate and can provide rapid detection of living mycobacteria in clinical specimens. Using liquid medium showed that bacterial activity measured by IMC using a TAM Air® agreed with the triphenyl tetrazolium chloride (TTC) assay. Using solid medium to enhance growth, fast-growing mycobacteria detection was achieved between 26 and 53 h and slow-growing mycobacteria detection was achieved between 54 and 298 h. In addition, the calorimetric data were analysed to estimate the growth rate and generation time of the mycobacteria monitored. SIGNIFICANCE AND IMPACT OF THE STUDY: Infections caused by mycobacteria are severe and difficult to treat. With 9·27 million new cases of tuberculosis in 2007, developing countries experience severe health and economic consequences owing to the lack of an affordable, fast detection method. Research-grade IMC instruments are too expensive to use in developing countries. Our study demonstrates that less-expensive instruments such as the TAM air® are adequate for mycobacteria detection and therefore establishes a clear proof of concept.

Quantification of vital adherent Streptococcus sanguinis cells on protein-coated titanium after disinfectant treatment.

The quantification of vital adherent bacteria is challenging, especially when efficacy of antimicrobial agents is to be evaluated. In this study three different methods were compared in order to quantify vital adherent Streptococcus sanguinis cells after exposure to disinfectants. An anaerobic flow chamber model accomplished initial adhesion of S. sanguinis on protein-coated titanium. Effects of chlorhexidine, Betadine®, Octenidol®, and ProntOral® were assessed by quantifying vital cells using Live/Dead BacLight™, conventional culturing and isothermal microcalorimetry (IMC). Results were analysed by Kruskal-Wallis one-way analysis of variance. Live/dead staining revealed highest vital cell counts (P < 0.05) and demonstrated dose-dependent effect for all disinfectants. Microcalorimetry showed time-delayed heat flow peaks that were proportioned to the remaining number of viable cells. Over 48 h there was no difference in total heat between treated and untreated samples (P > 0.05), indicating equivalent numbers of bacteria were created and disinfectants delayed growth but did not eliminate it. In conclusion, contrary to culturing, live/dead staining enables detection of cells that may be viable but non-cultivable. Microcalorimetry allows unique evaluation of relative disinfectant effects by quantifying differences in time delay of regrowth of remaining vital cells.

Micro- and nanomechanical analysis of articular cartilage by indentation-type atomic force microscopy: validation with a gel-microfiber composite.

As documented previously, articular cartilage exhibits a scale-dependent dynamic stiffness when probed by indentation-type atomic force microscopy (IT-AFM). In this study, a micrometer-size spherical tip revealed an unimodal stiffness distribution (which we refer to as microstiffness), whereas probing articular cartilage with a nanometer-size pyramidal tip resulted in a bimodal nanostiffness distribution. We concluded that indentation of the cartilage's soft proteoglycan (PG) gel gave rise to the lower nanostiffness peak, whereas deformation of its collagen fibrils yielded the higher nanostiffness peak. To test our hypothesis, we produced a gel-microfiber composite consisting of a chondroitin sulfate-containing agarose gel and a fibrillar poly(ethylene glycol)-terephthalate/poly(butylene)-terephthalate block copolymer. In striking analogy to articular cartilage, the microstiffness distribution of the synthetic composite was unimodal, whereas its nanostiffness exhibited a bimodal distribution. Also, similar to the case with cartilage, addition of the negatively charged chondroitin sulfate rendered the gel-microfiber composite's water content responsive to salt. When the ionic strength of the surrounding buffer solution increased from 0.15 to 2 M NaCl, the cartilage's microstiffness increased by 21%, whereas that of the synthetic biomaterial went up by 31%. When the nanostiffness was measured after the ionic strength was raised by the same amount, the cartilage's lower peak increased by 28%, whereas that of the synthetic biomaterial went up by 34%. Of interest, the higher peak values remained unchanged for both materials. Taken together, these results demonstrate that the nanoscale lower peak is a measure of the soft PG gel, and the nanoscale higher peak measures collagen fibril stiffness. In contrast, the micrometer-scale measurements fail to resolve separate stiffness values for the PG and collagen fibril moieties. Therefore, we propose to use nanostiffness as a new biomarker to analyze structure-function relationships in normal, diseased, and engineered cartilage.

Biomedical use of isothermal microcalorimeters.

Isothermal microcalorimetry is becoming widely used for monitoring biological activities in vitro. Microcalorimeters are now able to measure heat production rates of less than a microwatt. As a result, metabolism and growth of relatively small numbers of cultured bacteria, protozoans, human cells and even small animals can be monitored continuously and extremely accurately at any chosen temperature. Dynamic effects on these organisms of changes in the culture environment--or of additions to it--are easily assessed over periods from hours to days. In addition microcalorimetry is a non-destructive method that does not require much sample preparation. It is also completely passive and thus allows subsequent evaluations of any kind on the undisturbed sample. In this review, we present a basic description of current microcalorimetry instruments and an overview of their use for various biomedical applications. These include detecting infections, evaluating effects of pharmaceutical or antimicrobial agents on cells, monitoring growth of cells harvested for tissue eingineering, and assessing medical and surgical device material physico-chemical stability and cellular biocompatibility.

"The heat is on": rapid microcalorimetric detection of mycobacteria in culture.

Detection of mycobacterial infection can be achieved by different means; however, culture-based methods remain the gold standard. In this paper, we present a new culture-based method using real-time microcalorimetric detection of growth of Mycobacterium species including Mycobacterium tuberculosis. Microcalorimetric detection of heat production by 6 different growing species of Mycobacterium was achieved between 20 and 310h depending on their type (fast vs. slow-growing mycobacteria) and initial concentration. This study demonstrates that microcalorimetric detection of mycobacterial growth is a potential advantageous alternative to methods using fluorescent or radiolabeled growth indicators.

Isothermal micro calorimetry--a new method for MIC determinations: results for 12 antibiotics and reference strains of E. coli and S. aureus.

BACKGROUND: Antimicrobial susceptibility testing of microorganisms is performed by either disc diffusion or broth dilution tests. In clinical use, the tests are often still performed manually although automated systems exist. Most systems, however, are based on turbidometric methods which have well-known drawbacks. RESULTS: In this study we evaluated isothermal micro calorimetry (IMC) for the determination of minimal inhibitory concentrations (MICs) of 12 antibiotics for five micro-organisms. Here we present the data for the 12 antibiotics and two representative microorganisms E. coli (a Gram-) and S. aureus (a Gram+). IMC was able to determine the MICs correctly according to CLSI values. Since MICs require 24 hours, time was not reduced. However, IMC provided new additional data - a continuous record of heat-producing bacterial activity (e.g. growth) in calorimetry ampoules at subinhibitory antibiotic concentrations. Key features of the heatflow (P) and aggregate heat (Q) vs. time curves were identified (t delay and Delta Q/Delta t respectively). Antibiotics with similar modes of action proved to have similar effects on t delay and/or Delta Q/Delta t. CONCLUSION: IMC can be a powerful tool for determining the effects of antibiotics on microorganisms in vitro. It easily provides accurate MICs - plus a potential means for analyzing and comparing the modes of action of antibiotics at subinhibitory concentrations. Also IMC is completely passive, so after evaluation, ampoule contents (media, bacteria, etc.) can be analyzed by any other method desired.

Early detection of aging cartilage and osteoarthritis in mice and patient samples using atomic force microscopy.

The pathological changes in osteoarthritis--a degenerative joint disease prevalent among older people--start at the molecular scale and spread to the higher levels of the architecture of articular cartilage to cause progressive and irreversible structural and functional damage. At present, there are no treatments to cure or attenuate the degradation of cartilage. Early detection and the ability to monitor the progression of osteoarthritis are therefore important for developing effective therapies. Here, we show that indentation-type atomic force microscopy can monitor age-related morphological and biomechanical changes in the hips of normal and osteoarthritic mice. Early damage in the cartilage of osteoarthritic patients undergoing hip or knee replacements could similarly be detected using this method. Changes due to aging and osteoarthritis are clearly depicted at the nanometre scale well before morphological changes can be observed using current diagnostic methods. Indentation-type atomic force microscopy may potentially be developed into a minimally invasive arthroscopic tool to diagnose the early onset of osteoarthritis in situ.

A comparison between ((3)H)-thymidine incorporation and isothermal microcalorimetry for the assessment of antigen-induced lymphocyte proliferation.

Lymphocyte transformation tests (LTT) are time-consuming radioactive assays used in the clinic for the determination of allergic drug reactions and extensively in basic immunological research. In the present study we propose an alternative method in the monitoring of T-cell responses by isothermal microcalorimetric (IMC) measurements of overall cellular heat production as a function of time. For mitogen-induced lymphocyte proliferation, we analyzed a concentration dependent effect of phytohemaglutinin (PHA) and both tests showed a good correlation. This was also the case for specific antigenic stimulation with Varidase(R) or tetanus toxoid. On the other hand, antigen-induced lymphocyte proliferation analyzed by pre and post influenza vaccine (Inflexal(R) V) samples, showed no such correlation. Our study suggests that IMC measurements, despite the advantages of simplicity, on-line recording of metabolic activity and no use of radioactivity, may be limited to monitoring mitogen-induced lymphocyte proliferation.

Rapid differentiation of methicillin-susceptible Staphylococcus aureus from methicillin-resistant S. aureus and MIC determinations by isothermal microcalorimetry.

In this study, the use of isothermal microcalorimetry (IMC) for differentiation between methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-susceptible S. aureus (MSSA) and MIC determination was evaluated. It was possible to differentiate between MRSA and MSSA within 4 h, whereas the standard method required 24 h. The MICs of cefoxitin were successfully determined for MRSA and MSSA by using IMC.

Adhesion of Streptococcus sanguinis to glass surfaces measured by isothermal microcalorimetry (IMC).

Bacterial adhesion is the first step in the development of the oral biofilm, called dental plaque. Plaque is the cause of caries, periodontal diseases, and periimplantitis. Investigations of dental plaque, including bacterial adhesion, employ various in vivo and in vitro models using microscopic methods. Microcalorimetry offers another direct approach. The model organism Streptococcus sanguinis is one of the first colonizers adhering to the saliva-coated human tooth surfaces or dental materials within minutes after tooth cleaning. TAM III thermostats, equipped with microcalorimeters, were used for isothermal microcalorimetric (IMC) measurements of heat production as a function of time, expressed by power-time (p-t) curves. Continuous measurements of heat production of growing S. sanguinis cells showed their overall metabolic activity and were highly reproducible. For the adhesion experiments the bacteria were allowed to adhere to different amounts of glass beads. Growing S. sanguinis cells produced a characteristic p-t curve with a maximum of 500 microW at 4.5 h when reaching 10(9) cells ml(-1). The same number of stationary S. sanguinis cells, suspended in PBS produced only approximately 30 microW at 0.5 h due to adhesion. But the amount of heat increased with available glass surface area, indicating that a portion of the heat of adhesion was measured. Similar results were obtained with stationary S. sanguinis cells suspended in human saliva. This study shows that microcalorimetric evaluation of initial bacterial adhesion is indeed possible and may become a rapid, reproducible screening method to study adhesion of different bacteria to different dental materials or to modified surfaces.

Precultivation of engineered human nasal cartilage enhances the mechanical properties relevant for use in facial reconstructive surgery.

OBJECTIVE: To investigate if precultivation of human engineered nasal cartilage grafts of clinically relevant size would increase the suture retention strength at implantation and the tensile and bending stiffness 2 weeks after implantation. SUMMARY BACKGROUND INFORMATION: To be used for reconstruction of nasal cartilage defects, engineered grafts need to be reliably sutured at implantation and resist to bending/tension forces about 2 weeks after surgery, when fixation is typically removed. METHODS: Nasal septum chondrocytes from 4 donors were expanded for 2 passages and statically loaded on 15 x 5 x 2-mm size nonwoven meshes of esterified hyaluronan (Hyaff-11). Constructs were implanted for 2 weeks in nude mice between muscle fascia and subcutaneous tissue either directly after cell seeding or after 2 or 4 weeks of preculture in chondrogenic medium. Engineered tissues and native nasal cartilage were assessed histologically, biochemically, and biomechanically. RESULTS: Engineered constructs reproducibly developed with culture time into cartilaginous tissues with increasing content of glycosaminoglycans and collagen type II. Suture retention strength was significantly higher (3.6 +/- 2.2-fold) in 2-week precultured constructs than in freshly seeded meshes. Following in vivo implantation, tissues further developed and maintained the original scaffold size and shape. The bending stiffness was significantly higher (1.8 +/- 0.8-fold) if constructs were precultured for 2 weeks than if they were directly implanted, whereas tensile stiffness was close to native cartilage in all groups. CONCLUSION: In our experimental setup, preculture for 2 weeks was necessary to engineer nasal cartilage grafts with enhanced mechanical properties relevant for clinical use in facial reconstructive surgery.

Cartilage tissue engineering by expanded goat articular chondrocytes.

In this study we investigated whether expanded goat chondrocytes have the capacity to generate cartilaginous tissues with biochemical and biomechanical properties improving with time in culture. Goat chondrocytes were expanded in monolayer with or without combinations of FGF-2, TGF-beta1, and PDGFbb, and the postexpansion chondrogenic capacity assessed in pellet cultures. Expanded chondrocytes were also cultured for up to 6 weeks in HYAFF-M nonwoven meshes or Polyactive foams, and the resulting cartilaginous tissues were assessed histologically, biochemically, and biomechanically. Supplementation of the expansion medium with FGF-2 increased the proliferation rate of goat chondrocytes and enhanced their postexpansion chondrogenic capacity. FGF-2-expanded chondrocytes seeded in HYAFF-M or Polyactive scaffolds formed cartilaginous tissues with wet weight, glycosaminoglycan, and collagen content, increasing from 2 days to 6 weeks culture (up to respectively 2-, 8-, and 41-fold). Equilibrium and dynamic stiffness measured in HYAFF M-based constructs also increased with time, up to, respectively, 1.3- and 16-fold. This study demonstrates the feasibility to engineer goat cartilaginous tissues at different stages of development by varying culture time, and thus opens the possibility to test the effect of maturation stage of engineered cartilage on the outcome of cartilage repair in orthotopic goat models.

Pulsatile dynamic stiffness of cartilage-like materials and use of agarose gels to validate mechanical methods and models.

Stiffness is a fundamental indicator of the functional state of articular cartilage. Reported test modes include compressive incremental strain to determine the equilibrium modulus, and sinusoidal strain to determine the dynamic modulus and stress/strain loss angle. Here, initial development is described for a method recognizing that gait is pulsatile. Agarose gels have been used by others for validation or comparison of mechanical test methods and models for cartilage and proteoglycan aggregate. Accordingly, gels ranging from 0.5 to 20% agarose were prepared. Pulsatile stiffness in both indentation and unconfined compression were closely reproducible. Stiffness as a function of agarose concentration rose exponentially, as found using other methods. Indentation stiffness was higher than for unconfined compression and ranged from approximately 2.0 kPa for 0.5% gel to approximately 3,800 kPa for 20% gel. Pulsatile dynamic stiffness appears to be a useful method, although further development is needed. Agarose gel stiffness values obtained by other methods were reviewed for comparison. Unfortunately, reported values for a given agarose concentration ranged widely (e.g. fourfold) even when test methods were similar. Causes appear to include differences in molecular weight and gel preparation time-temperature regimens. Also, agarose is hygroscopic, leading to unintended variations in gel composition. Agarose gels are problematic materials for validation or comparison of cartilage mechanical test methods and models.