Photo-physical characteristics of color N3-center in diamond studied via UV femtosecond-laser pumped luminescence.

Micro-joule UV-range (350-415 nm) femtosecond-laser pulses generated via frequency-doubled parametric conversion of 525-nm 150-fs pulses of Yb-glass laser were used for "hot" photoluminescence excitation in a diamond plate enriched by blue-emitting N3-centers (zero-phonon line, ZPL, at 415 nm). Photoluminescence spectra acquired in the range of 400-500 nm exhibited wavelength-independent well-resolved ZPL and phonon progression bands, where the involved phonons possessed the only energies of 0.09 eV (LA-phonons) and 0.15 eV (softened LO/TO-phonons), potentially, as a result of a Clemens decay mechanism. Photoluminescence yield in the ZPL and other phonon bands exhibited the power slope of 1.8 at lower energies and ≈1 at higher energies. The transition zone at fluence ∼1014-15 photons/cm2 was related to the saturation of the pumped resonance transition and the slower non-radiative vibrational relaxation to the ZPL-related excited electronic state and the nanosecond spontaneous photoluminescence transition to the ground state. As a result, the absorption cross section σ(370-390 nm) ≈1·10-15 cm2 and concentration [N3] ≈6·1014 cm-3 were determined along with the ZPL absorption cross section σ(415 nm) ≈2.5·10-15 cm2, and the non-radiative vibrational relaxation rate was estimated, providing altogether the crucial information on lasing possibilities in N3-doped diamonds.

Photoluminescent Microbit Inscripion Inside Dielectric Crystals by Ultrashort Laser Pulses for Archival Applications.

Inscription of embedded photoluminescent microbits inside micromechanically positioned bulk natural diamond, LiF and CaF2 crystals was performed in sub-filamentation (geometrical focusing) regime by 525 nm 0.2 ps laser pulses focused by 0.65 NA micro-objective as a function of pulse energy, exposure and inter-layer separation. The resulting microbits were visualized by 3D-scanning confocal Raman/photoluminescence microscopy as conglomerates of photo-induced quasi-molecular color centers and tested regarding their spatial resolution and thermal stability via high-temperature annealing. Minimal lateral and longitudinal microbit separations, enabling their robust optical read-out through micromechanical positioning, were measured in the most promising crystalline material, LiF, as 1.5 and 13 microns, respectively, to be improved regarding information storage capacity by more elaborate focusing systems. These findings pave a way to novel optomechanical memory storage platforms, utilizing ultrashort-pulse laser inscription of photoluminescent microbits as carriers of archival memory.

Productivity of Concentration-Dependent Conversion of Substitutional Nitrogen Atoms into Nitrogen-Vacancy Quantum Emitters in Synthetic-Diamond by Ultrashort Laser Pulses.

Tightly focused 515-nm, 0.3-ps laser pulses modify in a laser filamentation regime the crystalline structure of an Ib-type high-pressure, high-temperature (HPHT) synthesized diamond in a thin-plate form. The modified microregions (micromarks) in the yellow and colorless crystal zones, possessing different concentrations of elementary substitutional nitrogen (N) impurity atoms (C-centers), exhibit their strongly diminished local IR absorption (upon correction to the thickness scaling factor). Simultaneously, local visible-range (400-550 nm) absorption coefficients were increased, and photoluminescence (PL) yield was strongly enhanced in the broad range of 450-800 nm. The strong yellow-red PL enhancement saturates with laser exposure, implying the complete conversion of C-centers into nitrogen-vacancy (NV0,-) ones due to the laser-induced generation of Frenkel "interstitial-vacancy" I-V carbon pairs. The other emerging blue-green (>470 nm) and green-yellow (>500 nm) PL bands were also simultaneously saturated versus the laser exposure. The observed IR/optical absorption and PL spectral changes enlighten the ultrashort pulse laser inscription of NV0--based quantum-emitter centers in synthetic diamonds and enable the evaluation of the productivity of their inscription along with the corresponding I-V generation rates.

Hierarchical Surface Structures and Large-Area Nanoscale Gratings in As2S3 and As2Se3 Films Irradiated with Femtosecond Laser Pulses.

Chalcogenide vitreous semiconductors (ChVSs) find application in rewritable optical memory storage and optically switchable infrared photonic devices due to the possibility of fast and reversible phase transitions, as well as high refractive index and transmission in the near- and mid-infrared spectral range. Formed on such materials, laser-induced periodic surface structures (LIPSSs), open wide prospects for increasing information storage capacity and create polarization-sensitive optical elements of infrared photonics. In the present work, a possibility to produce LIPSSs under femtosecond laser irradiation (pulse duration 300 fs, wavelength 515 nm, repetition rate up to 2 kHz, pulse energy ranged 0.03 to 0.5 µJ) is demonstrated on a large (up to 5 × 5 mm2) area of arsenic sulfide (As2S3) and arsenic selenide (As2Se3) ChVS films. Scanning electron and atomic force microscopy revealed that LIPSSs with various periods (170-490 nm) and orientations can coexist within the same irradiated region as a hierarchical structure, resulting from the interference of various plasmon polariton modes generated under intense photoexcitation of nonequilibrium carriers within the film. The depth of the structures varied from 30 to 100 nm. The periods and orientations of the formed LIPSSs were numerically simulated using the Sipe-Drude approach. A good agreement of the calculations with the experimental data was achieved.

Multi-Parametric Birefringence Control in Ultrashort-Pulse Laser-Inscribed Nanolattices in Fluorite.

An ultrashort-pulse laser inscription of embedded birefringent microelements was performed inside bulk fluorite in pre-filamentation (geometrical focusing) and filamentation regimes as a function of laser wavelength, pulsewidth and energy. The resulting elements composed of anisotropic nanolattices were characterized by retardance (Ret) and thickness (T) quantities, using polarimetric and 3D-scanning confocal photoluminescence microscopy, respectively. Both parameters exhibit a monotonous increase versus pulse energy, going over a maximum at 1-ps pulsewidth at 515 nm, but decrease versus laser pulsewidth at 1030 nm. The resulting refractive-index difference (RID) Δn = Ret/T ~ 1 × 10-3 remains almost constant versus pulse energy and slightly decreases at a higher pulsewidth, generally being higher at 515 nm. The birefringent microelements were visualized using scanning electron microscopy and chemically characterized using energy-dispersion X-ray spectroscopy, indicating the increase of calcium and the contrary decrease of fluorine inside them due to the non-ablative inscription character. Dynamic far-field optical diffraction of the inscribing ultrashort laser pulses also demonstrated the accumulative inscription character, depending on the pulse energy and the laser exposure. Our findings revealed the underlying optical and material inscription processes and demonstrated the robust longitudinal homogeneity of the inscribed birefringent microstructures and the facile scalability of their thickness-dependent retardance.

Nanoscale Vacancy-Mediated Aggregation, Dissociation, and Splitting of Nitrogen Centers in Natural Diamond Excited by Visible-Range Femtosecond Laser Pulses.

Natural IaA+B diamonds were exposed in their bulk by multiple 0.3 ps, 515 nm laser pulses focused by a 0.25 NA micro-objective, producing in the prefocal region (depth of 20-50 µm) a bulk array of photoluminescent nanostructured microtracks at variable laser exposures and pulse energies. These micromarks were characterized at room (25°) and liquid nitrogen cooling (-120 °C) temperatures through stationary 3D scanning confocal photoluminescence (PL) microspectroscopy at 405 and 532 nm excitation wavelengths. The acquired PL spectra exhibit a linearly increasing pulse-energy-dependent yield in the range of 575 to 750 nm (NV0, NV- centers) at the expense of the simultaneous reductions in the blue-green (450-570 nm; N3a, H4, and H3 centers) and near-IR (741 nm; V0 center) PL yield. A detailed analysis indicates a low-energy rise in PL intensity for B2-related N3a, H4, and H3 centers, while at higher, above-threshold pulse energies it decreases for the H4, H3, and N3a centers, converting into NV centers, with the laser exposure effect demonstrating the same trend. The intrinsic and (especially) photo-generated vacancies were considered to drive their attachment as separate species to nitrogen centers at lower vacancy concentrations, while at high vacancy concentrations the concerted splitting of highly aggregated nitrogen centers by the surrounding vacancies could take place in favor of resulting NV centers.

"Stealth Scripts": Ultrashort Pulse Laser Luminescent Microscale Encoding of Bulk Diamonds via Ultrafast Multi-Scale Atomistic Structural Transformations.

The ultrashort-laser photoexcitation and structural modification of buried atomistic optical impurity centers in crystalline diamonds are the key enabling processes in the fabrication of ultrasensitive robust spectroscopic probes of electrical, magnetic, stress, temperature fields, and single-photon nanophotonic devices, as well as in "stealth" luminescent nano/microscale encoding in natural diamonds for their commercial tracing. Despite recent remarkable advances in ultrashort-laser predetermined generation of primitive optical centers in diamonds even on the single-center level, the underlying multi-scale basic processes, rather similar to other semiconductors and dielectrics, are almost uncovered due to the multitude of the involved multi-scale ultrafast and spatially inhomogeneous optical, electronic, thermal, and structural elementary events. We enlighten non-linear wavelength-, polarization-, intensity-, pulsewidth-, and focusing-dependent photoexcitation and energy deposition mechanisms in diamonds, coupled to the propagation of ultrashort laser pulses and ultrafast off-focus energy transport by electron-hole plasma, transient plasma- and hot-phonon-induced stress generation and the resulting variety of diverse structural atomistic modifications in the diamond lattice. Our findings pave the way for new forthcoming groundbreaking experiments and comprehensive enlightening two-temperature and/or atomistic modeling both in diamonds and other semiconductor/dielectric materials, as well as innovative technological breakthroughs in the field of single-photon source fabrication and "stealth" luminescent nano/microencoding in bulk diamonds for their commercial tracing.

Ferroelectric Nanodomain Engineering in Bulk Lithium Niobate Crystals in Ultrashort-Pulse Laser Nanopatterning Regime.

Ferroelectric nanodomains were formed in bulk lithium niobate single crystals near nanostructured microtracks laser-inscribed by 1030-nm 0.3-ps ultrashort laser pulses at variable pulse energies in sub- and weakly filamentary laser nanopatterning regimes. The microtracks and related nanodomains were characterized by optical, scanning probe and confocal second-harmonic generation microscopy methods. The nanoscale material sub-structure in the microtracks was visualized in the sample cross-sections by atomic force microscopy (AFM), appearing weakly birefringent in polarimetric microscope images. The piezoresponce force microscopy (PFM) revealed sub-100 nm ferroelectric domains formed in the vicinity of the embedded microtrack seeds, indicating a promising opportunity to arrange nanodomains in the bulk ferroelectric crystal in on-demand positions. These findings open a new modality in direct laser writing technology, which is related to nanoscale writing of ferroelectric nanodomains and prospective three-dimensional micro-electrooptical and nanophotonic devices in nonlinear-optical ferroelectrics.

Hierarchical Multi-Scale Coupled Periodical Photonic and Plasmonic Nanopatterns Inscribed by Femtosecond Laser Pulses in Lithium Niobate.

The ultrafast interaction of tightly focused femtosecond laser pulses with bulk dielectric media in direct laser writing (inscription) regimes is known to proceed via complex multi-scale light, plasma and material modification nanopatterns, which are challenging for exploration owing to their mesoscopic, transient and buried character. In this study, we report on the first experimental demonstration, analysis and modeling of hierarchical multi-period coupled longitudinal and transverse nanogratings in bulk lithium niobate inscribed in the focal region by 1030 nm, 300 fs laser pulses in the recently proposed sub-filamentary laser inscription regime. The longitudinal Bragg-like topography nanogratings, possessing the laser-intensity-dependent periods ≈ 400 nm, consist of transverse birefringent nanogratings, which are perpendicular to the laser polarization and exhibit much smaller periods ≈ 160 nm. Our analysis and modeling support the photonic origin of the longitudinal nanogratings, appearing as prompt electromagnetic and corresponding ionization standing waves in the pre-focal region due to interference of the incident and plasma-reflected laser pulse parts. The transverse nanogratings could be assigned to the nanoscale material modification by interfacial plasmons, excited and interfered in the resulting longitudinal array of the plasma sheets in the bulk dielectric material. Our experimental findings provide strong support for our previously proposed mechanism of such hierarchical laser nanopatterning in bulk dielectrics, giving important insights into its crucial parameters and opening the way for directional harnessing of this technology.

Up/Down-Scaling Photoluminescent Micromarks Written in Diamond by Ultrashort Laser Pulses: Optical Photoluminescent and Structural Raman Imaging.

Elongated photoluminescent micromarks were inscribed inside a IaAB-type natural diamond in laser filamentation regime by multiple 515 nm, 0.3 ps laser pulses tightly focused by a 0.25 NA micro-objective. The micromark length, diameter and photoluminescence contrast scaled as a function of laser pulse energy and exposure, coming to a saturation. Our Raman/photoluminescence confocal microscopy studies indicate no structural diamond damage in the micromarks, shown as the absent Raman intensity variation versus laser energy and exposition along the distance from the surface to the deep mark edge. In contrast, sTable 3NV (N3)-centers demonstrate the pronounced increase (up to 40%) in their 415 nm zero-phonon line photoluminescence yield within the micromarks, and an even higher-ten-fold-increase in NV0-center photoluminescence yield. Photogeneration of carbon Frenkel "interstitial-vacancy" (I-V) pairs and partial photolytic dissociation of the predominating 2N (A)-centers were suggested to explain the enhanced appearance of 3NV- and NV-centers, apparently via vacancy aggregation with the resulting N (C)-centers or, consequently, with 2N- and N-centers.

Asymmetric spectral broadening of sub-picosecond laser pulse in BaWO4 crystal: interplay of self-phase modulation, stimulated Raman scattering, and orientational Kerr nonlinearity.

Spectral broadening of 0.3 ps 515 nm laser pulse in a highly Raman-active BaWO4 crystal and fused silica demonstrates significantly different behavior with the incident pulse energy. While the broadening in fused silica is fairly symmetric with respect to the pump laser pulse wavelength, the Stokes wing broadening in the BaWO4 crystal is 2 times wider than that of anti-Stokes wing, the former demonstrating a step-like increase with the pulse energy. To the best of our knowledge, the obtained data are the first clear evidences of the following facts: (i) stimulated Raman scattering with sufficiently high efficiency of conversion to Stokes components slows down spectral broadening induced by self-phase modulation, and (ii) the mechanism of Kerr nonlinearity, which is responsible for self-phase modulation in BaWO4, is of orientational nature. The nonlinear refraction coefficient and its decay time following from our experiments with BaWO4 were estimated as n2≈6.4.10-15cm2/W and τNL≈0.35ps.

Few Percent Efficient Polarization-Sensitive Conversion in Nonlinear Plasmonic Interactions Inside Oligomeric Gold Structures.

The backscattering spectra of a 500 nm thick gold film, which was excited near the 525 nm transverse localized plasmon resonance of its constituent, self-organized, vertically-aligned nanorods by normally incident 515 nm, 300 fs laser pulses with linear, radial, azimuthal and circular polarizations, revealed a few-percent conversion into Stokes and anti-Stokes side-band peaks. The investigation of these spectral features based on the nanoscale characterization of the oligomeric structure and numerical simulations of its backscattering response indicated nonlinear Fano-like plasmonic interactions, particularly the partially degenerate four-wave mixing comprised by the visible-range transverse plasmon resonance of the individual nanorods and an IR-range collective mode of the oligomeric structure. Such oligomeric structures in plasmonic films may greatly enhance inner nonlinear electromagnetic interactions and inner near-IR hotspots, paving the way for their engineered IR tunability for broad applications in chemosensing and biosensing.

Polarization-Sensitive Surface-Enhanced In Situ Photoluminescence Spectroscopy of S. aureus Bacteria on Gold Nanospikes.

We report the possibility of a time-resolved bacterial live/dead dynamics observation with the use of plasmonic nanospikes. Sharp nanospikes, fabricated on a 500-nm thick gold film by laser ablation with the use of 1030-nm femtosecond pulses, were tested as potential elements for antibacterial surfaces and plasmonic luminescence sensors. Staphylococcus aureus bacteria were stained by a live/dead viability kit, with the dead microorganisms acquiring the red colour, caused by the penetration of the luminescent dye propidium iodide through the damaged cell membrane. Photoluminescence was pumped by 515-nm femtosecond laser pulses with linear (Gaussian beam), circular, azimuthal and radial (Laguerre-Gaussian beam) polarizations, exciting the transverse plasmon resonance of the nanospikes and their apex lightning-rod near-field. According to the numerical electrodynamic modeling, the observed strong increase in the photoluminescence yield for radial polarization, while slightly lower for circular and azimuthal polarizations, compared with the low luminescence intensities for the linear laser polarization, was related to their different laser-nanospike coupling efficiencies.

Direct laser writing of barriers with controllable permeability in porous glass.

Barriers were produced in porous glass through its local bulk density modification by direct femtosecond writing accompanied by СО2-laser surface thermal densification, to make functional microfluidic elements separated by such physical barriers with different controlled permeability. The separation of multi-component solutions into individual components with different molecule sizes (molecular separation) was performed in this first integrated microfluidic device fabricated in porous glass. Its application in the environmental gas-phase analysis was demonstrated.

On-Fly Femtosecond-Laser Fabrication of Self-Organized Plasmonic Nanotextures for Chemo- and Biosensing Applications.

Surface-enhanced Raman scattering (SERS) and surface-enhanced photoluminescence (SEPL) are emerging as versatile widespread methods for biological, chemical, and physical characterization in close proximity of nanostructured surfaces of plasmonic materials. Meanwhile, single-step, facile, cheap, and green technologies for large-scale fabrication of efficient SERS or SEPL substrates, routinely demonstrating both broad plasmonic response and high enhancement characteristics, are still missing. In this research, single-pulse spallative micron-size craters in a thick Ag film with their internal nanotexture in the form of nanosized tips are for the first time shown to demonstrate strong polarization-dependent enhancement of SEPL and SERS responses from a nanometer-thick covering Rhodamine 6G layer with average enhancement factors of 40 and 2 × 10(6), respectively. Additionally, the first detailed experimental study is reported for physical processes, underlying the formation mechanisms of ablative nanotextures on such "thick" metal films. Such mechanisms demonstrate a complex "hybrid" fluence-dependent ablation character-appearance of spallative craters, typical for bulk material, at low fluences and formation of upright standing nanotips (frozen nanojets), usually associated with thin-film ablation, in the crater centers at higher fluences. Moreover, special emphasis was made on the possibility to reshape the nanotopography of such spallative craters through multipulse laser-induced merging of their small nanotips into larger ones. The presented approach holds promise to be one of the cheapest and easiest-to-implement ways to mass-fabricate various efficient spallation-nanotextured single-element plasmonic substrates for routine chemo- and biosensing, using MHz-repetition-rate femtosecond fiber laser sources with multiplexed laser-beams.

Formulation of a new and simple nonuniform size-modified Poisson-Boltzmann description.

The nonlinear Poisson-Boltzmann equation (PBE) governing biomolecular electrostatics neglects ion size and ion correlation effects, and recent research activity has focused on accounting for these effects to achieve better physical modeling realism. Here, attention is focused on the comparatively simpler challenge of addressing ion size effects within a continuum-based solvent modeling framework. Prior works by Borukhov et al. (Phys. Rev. Lett. 1997, 79, 435; Electrochim. Acta 2000, 46, 221) have examined the case of uniform ion size in considerable detail. Generalizations to accommodate different species ion sizes have been performed by Li (Nonlinearity 2009, 22, 811; SIAM J. Math. Anal. 2009, 40, 2536) and Zhou et al. (Phys. Rev. E 2011, 84, 021901) using a variational principle, Chu et al. (Biophys. J. 2007, 93, 3202) using a lattice gas model, and Tresset (Phys. Rev. E 2008, 78, 061506) using a generalized Poisson-Fermi distribution. The current work provides an alternative derivation using simple statistical mechanics principles that place the ion size effects and energy distributions on a consistent statistical footing. The resulting expressions differ from the prior nonuniform ion-size developments. However, all treatments reduce to the same form in the cases of uniform ion-size and zero ion size (the PBE). Because of their importance to molecular modeling and salt-dependent behavior, expressions for the salt sensitivities and ionic forces are also derived using the nonuniform ion size description. Emphasis in this article is on formulation and numerically robust evaluation; results are presented for a simple sphere and a previously considered DNA structure for comparison and validation. More extensive application to biomolecular systems is deferred to a subsequent article.