ABSTRACT
The purpose of this work was to characterize the viscoelastic behaviour of oral mucosa and compare it with the dynamic mechanical properties of different soft liners. For this purpose, a sample of pig oral mucosa and six commercialized soft liner samples have been investigated. A comparison was also carried with the first suitable hard rubber for dental prosthetics: vulcanite. Creep recovery (CR) and dynamic mechanical analysis (DMA) have been used to determine the mechanical modulus of oral mucosa and soft liners respectively. The Poisson ratio is used to compare mucosa bulk modulus and soft liner shear modulus. The biomechanical concept of conventional complete dentures needs a good adjustment of dynamic mechanical impedance between the base and oral mucosa. The viscoelastic mechanical property of the oral mucosa as a referent biopolymer has been confirmed in vitro. The modulus value, adjusted for old patients in physiological conditions, is in the order of 3 MPa. This study underlines the plasticization effect of absorbed water on the mechanical properties of the underlying tissue. This study allows us to define some characteristics of the most adapted biomaterial according to the clinical exigency. The required biomaterial must display the following properties: compatibility and chemical resistance with biological environment perpetuated mechanical properties during physiological conditions and clinical use, good adjustment of dynamic mechanical impedance with supporting mucosa and easy sample processing.
Subject(s)
Denture Liners , Mechanical Phenomena , Mouth Mucosa , Polymers , Animals , Biomechanical Phenomena , Compressive Strength , Elasticity , Humans , Swine , Temperature , ViscosityABSTRACT
A biomimetic composite of nanohydroxyapatite (nHap) and semicrystalline polyamide 6,9 (PA 6,9) was synthesized by thermally induced phase separation. The nHap powder was dispersed in a polymer matrix with a low ratio ranging 1-10 wt %. The mean size of the nHap, determined by scanning electron microscopy (SEM) was approximately 100-200 nm (length), 40-60 nm (width). Physicochemical analyses were performed in order to characterize the PA 6,9 and nHap separately on the one hand, and the PA 6,9/nHap composites on the other hand. Differential scanning calorimetry (DSC) and dynamic mechanical analyses (DMA) have pointed out an optimization of the composite physical properties as a function of nHap content till a limit value of 5 wt %. Above this value, the mechanical properties decreased. Four main parameters have been found to influence the composite physical properties improvement: the fillers content, the physical structure of the polymeric matrix, the particles dispersion and the physical interaction strength between organic and inorganic phases. The dynamic mechanical properties of this biomimetic nanocomposite were compared with human cortical bone.
