Influence of Bone Cement Augmentation on Complications in Cephalomedullary Nail Fixation of Geriatric Intertrochanteric Hip Fractures.

Introduction: The purpose of this study was to determine if augmentation of the helical blade with polymethylmethacrylate bone cement decreases the rates of varus cut-out and medial perforation in geriatric intertrochanteric hip fracture fixation. Methods: This was a retrospective comparative cohort study at two urban Level I trauma centers. Patients with an intertrochanteric hip fracture (classified as AO 31A1-3) who were treated with the TFN-Advanced Proximal Femoral Nailing System (TFNA) from 2018 to 2021 were eligible for the study. Medical records and post-operative radiographs were reviewed to determine procedure complications and reoperations. Results: Of the 179 patients studied, cement augmentation (CA) was used in 93 patients (52%) and no cement augmentation (NCA) was used in 86 (48%). There were no significant differences between group demographics and fracture reduction grades. Varus cut-out occurred three times in the CA group and five times in the NCA group (p = 0.48). Medial perforation occurred three times, all in the NCA group (p = 0.11). The most frequent complication was symptomatic blade lateralization from fracture collapse, with eight occurrences in the CA group compared with two in the NCA group (p = 0.10). There were 10 reoperations in the CA group and 9 in the NCA group (p = 0.99). The most common reason for reoperation was varus cut-out and the most common revision procedure was hip arthroplasty. Conclusions: Intertrochanteric hip fractures treated with the TFNA fixation system with and without cement augmentation have similar complication profiles and reoperation rates.

Improving Medical Student Mentorship in Orthopaedic Surgery.

Introduction: Owing to limited clinical clerkships and travel restrictions related to COVID-19, recent medical student mentorship in orthopaedic surgery has been impacted negatively. The purpose of this quality improvement (QI) project was to determine if medical student awareness of orthopaedics as a possible career field may be improved through a mentoring program designed and delivered by orthopaedic residents. Methods: A five-resident QI team developed four educational sessions aimed at a medical student audience. Forum topics included: (1) orthopaedics as a career, (2) fracture conference, (3) splinting workshop, and (4) residency application process. Pre- and post-forum surveys were administered to student participants to assess changes in their perceptions regarding orthopaedic surgery. Data derived from the questionnaires were analyzed with nonparametric statistical tests. Results: Of 18 forum participants, 14 were men and 4 were women. A total of 40 survey pairs were collected, averaging 10 per session. In the all-participant encounter analysis, there were statistically significant improvements in all outcome measures including interest in, exposure to, and knowledge of orthopaedics; exposure to our training program; and ability to interact with our residents. Those undecided regarding their specialty demonstrated larger increases in post-forum responses, suggesting that the learning experience was more impactful for that subgroup. Conclusions: This QI initiative was a successful demonstration of orthopaedic resident mentorship of medical students, wherein perceptions of orthopaedics were influenced favorably by the educational experience. For some students with limited access to orthopaedic clerkships or formal one-on-one mentoring, forums like these may be an acceptable alternative.

Clinical Rotation Handbook Promotes Orthopaedic Resident Wellness: A Quality Improvement Study.

Introduction: Transitioning from one clinical rotation to the next may be particularly stressful for orthopaedic residents attempting to navigate new work environments with new faculty mentors and new patients. The purpose of this quality improvement (QI) project was to determine if resident stress could be improved by using a handbook to disseminate key rotation-specific data during quarterly rotation transition periods. Methods: A comprehensive electronic handbook was created by residents to describe each rotation in our orthopaedic training program in terms of: (1) faculty and staff contact data, (2) daily clinic and surgery schedules, (3) resident responsibilities and faculty expectations, and (4) key resources and documents. At rotation transition, a session in the academic schedule was dedicated for outgoing residents to update the handbook and to sign-out to incoming residents. Pre- and post-handbook questionnaires were administered to assess resident perceptions of stress or anxiety, preparedness, and confidence before commencing the new rotation. Nonparametric data derived from the surveys were analyzed using the sign test choosing p < 0.05 for a two-tailed test as the level of statistical significance. Results: Most residents perceived improvements in stress/anxiety, preparedness, and confidence understanding rotation expectations after the handbook was implemented. Changes in these three outcome parameters were statistically significant. Conclusions: This rotation transition QI initiative consisting of a resident-authored, rotation-specific electronic handbook and dedicated verbal sign-out session enhanced resident wellness by decreasing stress, increasing preparedness, and improving confidence among residents starting a new rotation. Similar online resources may be useful for trainees in other specialties.

Cut Cortical Screw Purchase in Diaphyseal Bone: A Biomedical Study.

Introduction: During fracture osteosynthesis, traumatologists may remove screws which are too long, cut the excess length from the screw tip, then reinsert the cut screw (CS) to minimize implant waste. The purpose of this study was to determine if this practice influences screw purchase. Methods: Using an axial-torsion load device, the maximal insertion torque (MIT) required to insert 3.5 mm stainless steel cortical screws into normal and osteoporotic bone models was measured. MIT was determined in three different test conditions: (1) long screw (LS) insertion; (2) LS insertion, removal, and insertion of a normal-length screw (NS); and, (3) LS insertion, removal, cutting excess length from the screw tip, and reinserting the CS. Results: In the normal bone model, mean (± SD) MIT of LS insertion was 546 ± 6 Newton-centimeters (N-cm) compared to 496 ± 61 N-cm for NS reinsertion and 465 ± 69 N-cm for CS reinsertion. In the osteoporotic bone model, MIT of LS insertion was 110 ± 11 N-cm, whereas the values for NS and CS reinsertions were 98 ± 9 N-cm and 101 ± 12 N-cm, respectively. There was no significant difference in MIT between CS and NS reinsertions in the osteoporotic bone analog. Conclusions: Cutting excess length from a 3.5 mm stainless steel cortical screw did not decrease its purchase regardless of bone density. During osteosynthesis, orthopaedists may remove screws which are too long, cut the screw tip, and reinsert the shortened screw as a cost-saving measure without compromising fracture fixation.

Improving Electronic Patient Handoff in an Orthopaedic Residency using the Listrunner© Application.

Introduction: Miscommunication during shift change and other handoff events is a common source of malpractice claims and patient-care errors. An efficient patient handoff system is imperative to prevent miscommunication. Owning to limitations with our current handoff system and to an ever-increasing reliance on electronic health information, our residency program sought to modernize our handoff method. Methods: To improve handoff communication, the HIPAA-compliant application Listrunner© was adopted. Members of the orthopaedic trauma team were oriented to the new application. Change-of-shift patient handoff was transitioned from the current email system to List-runner©. After three months of using the new application, a web-based questionnaire was administered to all members of the care team to assess their experiences, including perceived benefits and limitations of the Listrunner© application. Results: Seventeen orthopaedic resident physicians and three orthopaedic trauma attending physicians completed the survey. While almost half of the respondents were satisfied using email as a checkout tool, more than half of study participants indicated that it lacked security and several users believed there was a need for improvement. Most indicated that Listrunner© was easy to use, improved clinical efficiency, and improved patient care and safety. Seventeen of 20 respondents reported that they would like to continue using Listrunner© as a check-out tool. Conclusions: The Listrunner© application was adopted quickly by our orthopaedic trauma team, whose members opined that the application increased the efficiency and accuracy of handoff when compared to the previous secure email system.

Creating and Implementing a Protocol for the Management of Patients in Skeletal Traction: A Quality Improvement Project.

INTRODUCTION: Skeletal traction use generally has decreased over generations and is used most often for temporary fracture stabilization. Proper nursing management of patients in skeletal traction is crucial. A hospital protocol was created and implemented to educate and direct registered nurses (RNs) in the care of patients requiring skeletal traction. METHODS: A skeletal traction management protocol was drafted and implemented as hospital policy. Twenty-nine RNs from an orthopaedic unit at a level 1 trauma center attended a financially compensated, 45-minute, in-person, off-shift educational session. An anonymous pre-test utilizing a 5-point Likert scale was completed to assess RN knowledge and comfort regarding the following topics of traction care: pin care, manual traction, frame assembly, weight application and removal, skin evaluation, neurovascular checks, and reporting issues. The RNs were provided with a copy of the new hospital policy and key points were highlighted and demonstrated. After the demonstration, the RNs were given a post-test to assess their perceived knowledge and comfort with traction care. RESULTS: Statistically significant improvements in RN knowledge and comfort were seen in six of the seven evaluated topics. The greatest increase was seen in the manual traction topic. No significant change regarding neurovascular checks was observed with this topic having the highest pre-test scores. CONCLUSIONS: A hospital protocol was created successfully and implemented that significantly improved the level of RN knowledge and comfort with the management of patients requiring skeletal traction. Future studies should assess the effectiveness of annual education regarding the traction policy.

Proximal Humerus Fractures in the Elderly: Concomitant Fractures and Management.

INTRODUCTION: The purpose of this study was to identify additional injuries commonly seen with proximal humerus fractures experienced by patients 65 years or older and to evaluate discrepancies in the management of these patients with regard to provider type. METHODS: A retrospective review was conducted of all patients 65 years or older who sustained a proximal humerus fracture. Patient data collected included demographics, injury details, hospital course, and discharge destination. RESULTS: Patients with a concomitant fracture (45.5%, n = 65) had a slightly higher Injury Severity Score (ISS; 8.3 ± 3.0 vs. 6.4 ± 3.0, p < 0.001) and experienced one additional death than those with an isolated fracture (54.5%, n = 78). Slightly more patients were managed by a trauma provider (51.7%, n = 74) than by a non-trauma provider (48.3%, n = 69). Those managed by a trauma provider sustained the most pelvic fractures (12.2% vs. 2.9%, p = 0.038), were more likely to be injured in a motor vehicle collision (8.1% vs. 0%, p = 0.005), had a higher ISS (8.0 ± 3.3 vs. 6.4 ± 2.8, p = 0.003), and had more imaging performed than those treated by a non-trauma provider. There was, however, no difference in operative rates, concomitant injuries, length of stay, or discharge disposition regarding provider type. CONCLUSION: It is important to recognize proximal humerus fractures as a sign of fragility and to optimize hospital management of these patients.

Clinical Outcomes of Intermediate-Length Cephalomedullary Nails for Intertrochanteric Femur Fracture Repair in Older Adults.

INTRODUCTION: Hip fracture is a major cause of morbidity and mortality in older adults. Intertrochanteric hip fractures often are treated surgically using cephalomedullary nails (CMN), in either a short or long length. Their outcomes are documented in the literature; however, outcomes of the intermediate-length CMN have not been well described. METHODS: A retrospective review was conducted of older adults with intertrochanteric hip fractures that were treated with cephalomedullary nail fixation using an intermediate-length (235 mm Synthes Trochanteric Fixation® nail or 240 mm Stryker Gamma 3®) nail. Outcome data were collected during the inpatient stay and 16 months post-operatively. RESULTS: Seventy-seven patients met inclusion criteria and were reviewed during inpatient stay; however, only 42 had documented post-operative outcomes. Of those, two patients died post-discharge and were not included in the 16-month follow-up. Comparison of results to published literature suggested that intermediate-length nails are comparable to short-length nails with regard to time in the operating room and estimated blood loss. The rate of blood transfusion was lower and length of hospital stay was shorter than in comparable studies of both short- and long-length nails. There were no post-operative peri-prosthetic fractures in the 16-month follow-up. This rate was lower than published rates for short and long nails. The hardware failure rate (3/42, 7.1%) of intermediate-length nails was higher than comparison studies of both short- and long-length nails. CONCLUSION: Patient outcomes for intermediate-length nails were similar to outcomes of shorter length nails. Utilization of the intermediate-length nail appears to be an effective treatment option for repair of intertrochanteric femur fractures. However, direct comparison is difficult since peri-prosthetic fracture rate may increase over time and nail length and hardware failure are not defined consistently in the literature. Further study is needed with a larger sample size followed over a longer period of time to confirm our findings.

Bone Health Improvement Protocol.

INTRODUCTION: Metabolic bone disease is a malady that causes significant morbidity and mortality to a patient who has sustained a fragility fracture. There is currently no protocol to prevent secondary fragility fracture at our institution. The objective of this study was to create an appropriate protocol for implementing clinical pathways for physicians to diagnose and treat osteoporosis and fragility fractures by educating patients. METHODS: A multidisciplinary team created an appropriate protocol that could be implemented in an inpatient setting. A thorough literature review was conducted to evaluate potential barriers and efficacious methods of protocol design. RESULTS: A bone health improvement protocol was developed. Any patient over the age of 50 who sustains a fracture from low energy trauma, such as a fall from standing or less, should be considered to place into this protocol. These patients received education on metabolic bone disease, a prescription for high dose vitamin D therapy, and laboratory testing to determine the etiology of their metabolic bone disease. Continuity of care of these patients with their primary care provider was provided for further management of their metabolic bone disease and evaluation of their disease after discharged from the hospital. DISCUSSION: Comprehensive secondary prevention should consist of osteoporosis assessment and treatment together with a fall risk assessment. With this protocol, secondary fragility fractures potentially could be prevented.

Long-term elastic durability of polymer matrix composite materials after repeated steam sterilization.

We compared the durability of 3 different selected composite materials that underwent repeated steam sterilization with the durability of traditional metal materials. Composite materials Tepex, CFR-PPS (carbon-fiber-reinforced polyphenylene sulfide), and HTN-53 (Zytel HTN53G50HSLR NC010) were evaluated for durability and water retention after repeated steam sterilization. These composites were compared with stainless steel and aluminum. The structural properties of these materials were measured (short-beam load-to-failure and cyclic compression loading tests) before, during, and after repeated steam sterilization. The relative radiographic density of these materials was also compared. There was no significant difference in the moisture retention of these composite materials before and after repeated sterilization. The composite materials were significantly more radiolucent than the metals. For all the composite materials, load to failure deteriorated after repeated sterilization. The cyclic compression loading tests showed HTN-53 had the poorest performance, with complete failure after 400 cycles of repeated sterilization. CFR-PPS performed slightly better, with 33% failure at final testing. Tepex had no failures at final testing. Although HTN-53 has shown promise in other orthopedic applications, its performance after repeated sterilization was relatively poor. Tepex showed the most potential for durability after repeated sterilization. Further study is needed to identify specific applications for these materials in the orthopedic industry.

Effect of initial postoperative visit radiographs on treatment plans.

BACKGROUND: It is a common practice among orthopaedic surgeons to make radiographs at the first outpatient postoperative visit after surgical repair of acute fractures. There is not much literature that investigates the benefits and necessity of such a practice. We hypothesized that the practice of routine postoperative radiographs is unnecessary and increases cost to the patients and the health-care system, increases radiation exposure, and provides no change in patient management. METHODS: A retrospective review of patients sustaining acute fractures requiring operative fixation was done with the goal of determining how often a radiograph made at the first postoperative visit in the surgeon's office resulted in a change in patient management. RESULTS: Fifteen (7.5%) of 200 fractures in 171 patients had a clinical indication for a radiograph because of an abnormal physical examination finding or history of additional trauma. Three (1.5%) of these fractures had a deviation from standard postoperative care; this deviation was a change in postoperative care on the basis of the patient history and physical examination rather than radiographs. One fracture (0.5%) had a radiographic change from the immediate postoperative radiograph to the clinic radiograph, yet did not have a change in treatment. The estimated average radiation exposure per radiograph was 0.164 mSv, and the average charge to the patient per radiograph was $335.13. CONCLUSIONS: The majority of radiographs made at the first postoperative visit in the surgeon's office after acute fracture fixation did not result in a change in patient management and added substantial cost to the health-care system.

Femoroacetabular impingement in a high school female athlete.

The patient was a 17-year-old female who was referred to a physical therapist by her primary-care physician with a chief complaint of bilateral hip and groin pain. The patient was treated by the physical therapist for 8 weeks, but she was unable to successfully return to playing soccer. The patient was subsequently referred to an orthopaedic surgeon, who ordered a magnetic resonance arthrogram that did not reveal intra-articular pathology. To further evaluate bony morphology, computed tomography with 3-dimensional reconstructions was ordered, which demonstrated findings consistent with cam-type femoroacetabular impingement.

Using flexible nails to improve stabilization of proximal femur fractures in adolescents.

Intramedullary fixation as a treatment for adolescent femur fractures has increased in popularity. We investigated the varus stability of 3 fixation techniques--the standard 2-nail configuration (2 retrograde nails), a 3-nail configuration (standard 2-nail configuration plus 1 antegrade nail), and a retrograde/antegrade 2-nail configuration--in synthetic femurs with 2 simulated fracture patterns (transverse, butterfly). A varus moment was applied to the specimens until 20 degrees of varus angulation was obtained. The varus angular stiffness of the construct defined varus stability. The 3-nail configuration had the most varus angular stiffness with both fracture patterns. The varus stability of the 3-nail configuration was statistically higher than that of the standard 2-nail configuration with the transverse fracture pattern only. Adding 1 antegrade nail to 2 retrograde nails significantly increased resistance to varus deformity of reduced proximal-third transverse femur fractures in the synthetic femur model.

Rotational control of various pediatric femur fractures stabilized with titanium elastic intramedullary nails.

This study investigated the torsional stability of transverse, oblique, spiral, butterfly, and comminuted pediatric femur fractures reduced with titanium elastic nails. Twenty-five fractures were created in synthetic analog pediatric femora (five of each fracture type); each fracture was reduced with two 4-mm-diameter titanium elastic nails. Each reduced femur was tested for rotational stability using an MTS. Angular displacements and torques were recorded, plotted, and regressed, and the slope (torsional stiffness) was determined; analysis of variance was performed between fracture groups and rotational testing direction. The oblique fracture pattern exhibited the greatest torsional stiffness in internal rotation, the spiral fracture pattern the greatest stiffness in external rotation. All reduced fracture patterns possessed a torsional stiffness statistically equal to or greater than the torsional stiffness of the transverse fracture pattern. These results suggest this method of internal fixation provides a consistent means of rotational stability for a variety of fracture patterns in a synthetic model.