Prunella vulgaris-phytosynthesized platinum nanoparticles: Insights into nanozymatic activity for H2O2 and glutamate detection and antioxidant capacity.

Artificial nanozymes (enzyme-mimics), specifically metallic nanomaterials, have garnered significant attention recently due to their reduced preparation cost and enhanced stability in a wide range of environments. The present investigation highlights, for the first time, a straightforward green synthesis of biogenic platinum nanoparticles (PtNPs) from a natural resource, namely Prunella vulgaris (Pr). To demonstrate the effectiveness of the phytochemical extract as an effective reducing agent, the PtNPs were characterized by various techniques such as UV-vis spectroscopy, High-resolution Transmission electron microscopy (HR-TEM), zeta-potential analysis, Fourier-transform infrared spectroscopy (FTIR), and Energy dispersive spectroscopy (EDS). The formation of PtNPs with narrow size distribution was verified. Surface decoration of PtNPs was demonstrated with multitudinous functional groups springing from the herbal extract. To demonstrate their use as viable nanozymes, the peroxidase-like activity of Pr/PtNPs was evaluated through a colorimetric assay. Highly sensitive visual detection of H2O2 with discrete linear ranges and a low detection limit of 3.43 µM was demonstrated. Additionally, peroxidase-like catalytic activity was leveraged to develop a colorimetric platform to quantify glutamate biomarker levels with a high degree of selectivity, the limit of detection (LOD) being 7.00 µM. The 2,2-Diphenyl-1-picrylhydrazyl (DPPH) test was used to explore the scavenging nature of the PtNPs via the degradation of DPPH. Overall, the colorimetric assay developed using the Pr/PtNP nanozymes in this work could be used in a broad spectrum of applications, ranging from biomedicine and food science to environmental monitoring.

MXene-Based Elastomer Mimetic Stretchable Sensors: Design, Properties, and Applications.

Flexible sensors based on MXene-polymer composites are highly prospective for next-generation wearable electronics used in human-machine interfaces. One of the motivating factors behind the progress of flexible sensors is the steady arrival of new conductive materials. MXenes, a new family of 2D nanomaterials, have been drawing attention since the last decade due to their high electronic conductivity, processability, mechanical robustness and chemical tunability. In this review, we encompass the fabrication of MXene-based polymeric nanocomposites, their structure-property relationship, and applications in the flexible sensor domain. Moreover, our discussion is not only limited to sensor design, their mechanism, and various modes of sensing platform, but also their future perspective and market throughout the world. With our article, we intend to fortify the bond between flexible matrices and MXenes thus promoting the swift advancement of flexible MXene-sensors for wearable technologies.

Electrochemical assisted enhanced nanozymatic activity of functionalized borophene for H2O2 and tetracycline detection.

This study unveils the electrochemically-enhanced nanozymatic activity exhibited by borophene during the reaction of 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2. Herein, the surface of the pristine borophene was first modified with the addition of thiocyanate groups to improve hydroxyl radical (•OH) scavenging activity. Then, the oxidation reaction of TMB was accelerated under applied electrochemical potential. Both factors significantly improved the detection limit and drastically decreased the detection time. DPPH testing revealed that the radical scavenging nature of borophene was more than 70%, boosting its catalytic activity. In the presence of H2O2, borophene catalyzed the oxidation of TMB and produced a blue-colored solution that was linearly correlated with the concentration of H2O2 and allowed for the detection of H2O2 up to 38 nM. The present finding was further extended to nanozymatic detection of tetracyclines (TCs) using a target-specific aptamer, and the results were colorimetrically quantifiable up to 1 µM with a LOD value of 150 nM. Moreover, transferring the principles of the discussed detection method to form a portable and disposable paper-based system enabled the quantification of TCs up to 0.2 µM. All the sensing experiments in this study indicate that the nanozymatic activity of borophene has significantly improved under electrochemical potential compared to conventional nanozyme-based colorimetric detection. Hence, the present discovery of electrochemically-enhanced nanozymatic activity would be promising for various sensitive and time-dependent colorimetric sensor development initiatives in the future.

Capra cartilage-derived peptide delivery via carbon nano-dots for cartilage regeneration.

Targeted delivery of site-specific therapeutic agents is an effective strategy for osteoarthritis treatment. The lack of blood vessels in cartilage makes it difficult to deliver therapeutic agents like peptides to the defect area. Therefore, nucleus-targeting zwitterionic carbon nano-dots (CDs) have immense potential as a delivery vehicle for effective peptide delivery to the cytoplasm as well as nucleus. In the present study, nucleus-targeting zwitterionic CDs have been synthesized as delivery vehicle for peptides while also working as nano-agents towards optical monitoring of cartilage healing. The functional groups of zwitterion CDs were introduced by a single-step microwave assisted oxidation procedure followed by COL II peptide conjugation derived from Capra auricular cartilage through NHS/EDC coupling. The peptide-conjugated CDs (PCDs) allows cytoplasmic uptake within a short period of time (∼30 m) followed by translocation to nucleus after ∼24 h. Moreover, multicolor fluorescence of PCDs improves (blue, green, and read channel) its sensitivity as an optical code providing a compelling solution towards enhanced non-invasive tracking system with multifunctional properties. The PCDs-based delivery system developed in this study has exhibited superior ability to induce ex-vivo chondrogenic differentiation of ADMSCs as compared to bare CDs. For assessment of cartilage regeneration potential, pluronic F-127 based PCDs hydrogel was injected to rabbit auricular cartilage defects and potential healing was observed after 60 days. Therefore, the results confirm that PCDs could be an ideal alternate for multimodal therapeutic agents.

Waste-Derived Sustainable Fluorescent Nanocarbon-Coated Breathable Functional Fabric for Antioxidant and Antimicrobial Applications.

Hospital-acquired (nosocomial) infections account for the majority of adverse health effects during care delivery, placing an immense financial strain on healthcare systems around the world. For the first time, the present article provides evidence of a straightforward pollution-free technique to fabricate a heteroatom-doped carbon dot immobilized fluorescent biopolymer composite for the development of functional textiles with antioxidant and antimicrobial properties. A simple, facile, and eco-friendly approach was devised to prepare heteroatom-doped carbon dots from waste green tea and a biopolymer. The carbon dots showed an excitation-dependent emission behavior, and the XPS data unveiled that they are co-doped with nitrogen and sulfur. A facile physical compounding strategy was adopted to fabricate a carbon dot reinforced biopolymeric composite followed by immobilization onto the textile. The composite textiles revealed excellent antioxidant activity, determined by 1,1-diphenyl-2-picrylhydrazyl (>80%) and 2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonic acid assays (>90%). The results of the disc diffusion assay indicated that the composite textiles substantially inhibited the growth of both tested bacteria Escherichia coli and Bacillus subtilis with increasing coating cycles. The time-dependent antibacterial experiments revealed that the nanocomposite can inhibit significant bacterial growth within a few hours. The present study could open up the possibility for the commercialization of inexpensive smart textile substrates for the prevention of microbial contamination used for the medical and healthcare field.

Naturally Derived Carbon Dots In Situ Confined Self-Healing and Breathable Hydrogel Monolith for Anomalous Diffusion-Driven Phytomedicine Release.

Fluorescent nanocarbons are well-proficient nanomaterials because of their optical properties and surface engineering. Herein, Apium graveolens-derived carbon dots (ACDs) have been synthesized by a one-step hydrothermal process without using any surplus vigorous chemicals or ligands. ACDs were captured via an in situ gelation reaction to form a semi-interpenetrating polymer network system showing mechanical robustness, fluorescent behavior, and natural adhesivity. ACDs-reinforced hydrogels were tested against robust uniaxial stress, repeated mechanical stretching, thixotropy, low creep, and fast strain recovery, confirming their elastomeric sustainability. Moreover, the room-temperature self-healing behavior was observed for the ACDs-reinforced hydrogels, with a healing efficacy of more than 45%. Water imbibition through hydrogel surfaces was digitally monitored via "breathing" and "accelerated breathing" behaviors. The phytomedicine release from the hydrogels was tuned by the ACDs' microstructure regulatory activity, resulting in better control of the diffusion rate compared to conventional chemical hydrogels. Finally, the phytomedicine-loaded hydrogels were found to be excellent bactericidal materials eradicating more than 85% of Gram-positive and -negative bacteria. The delayed network rupturing, superstretchability, fluorescent self-healing, controlled release, and antibacterial behavior could make this material an excellent alternative to soft biomaterials and soft robotics.

Cuprous Oxide Nanoparticles Decorated Fabric Materials with Anti-biofilm Properties.

Considering the global spread of bacterial infections, the development of anti-biofilm surfaces with high antimicrobial activities is highly desired. This work unraveled a simple, sonochemical method for coating Cu2O nanoparticles (NPs) on three different flexible substrates: polyester (PE), nylon 2 (N2), and polyethylene (PEL). The introduction of Cu2O NPs on these substrates enhanced their surface hydrophobicity, induced ROS generation, and completely inhibited the growth of sensitive (Escherichia coli and Staphyloccocus aureus) and drug-resistant (MDR E. coli and MRSA) planktonic and biofilm. The experimental results confirmed that Cu2O-PE exhibited complete biofilm mass reduction ability for all four strains, whereas Cu2O-N2 showed more than 99% biomass inhibition against both drug-resistant and sensitive pathogens in 6 h. Moreover, Cu2O-PEL also indicated a 99.95, 97.73, 98.00, and 99.20% biomass reduction of MRSA, MDR E. coli, E. coli, and S. aureus, respectively. All substrates were investigated for time-dependent inhibitions, and the associated biofilm mass and log reduction were evaluated. The mechanisms of Cu2O NP action against the mature biofilms include the generation of reactive oxygen species (ROS) as well as electrostatic interaction between Cu2O NPs and bacterial membranes. The current study could pave the way for the commercialization of sonochemically coated Cu2O NP flexible substrates for the prevention of microbial contamination in hospitals and industrial environments.

Mussel-Inspired Polynorepinephrine/MXene-Based Magnetic Nanohybrid for Electromagnetic Interference Shielding in X-Band and Strain-Sensing Performance.

The current work delivers preparation of MXene-based magnetic nanohybrid coating for flexible electronic applications. Herein, we report carbon dot-triggered photopolymerized polynorepinepherene (PNE)-coated MXene and iron oxide hybrid deposited on the cellulose microporous membrane via a vacuum-assisted filtration strategy. The surface morphologies have been monitored by scanning electron microscopy analysis, and the coating thickness was evaluated by the gallium-ion-based focused ion beam method. Coated membranes have been tested against uniaxial tensile stretching and assessed by their fracture edges in order to assure flexibility and mechanical strength. Strain sensors and electromagnetic interference (EMI) shielding have both been tested on the material because of its electrical conductivity. The bending strain sensitivity has been stringent because of their fast 'rupture and reform' percolation network formation on the coated surface. Increased mechanical strength, solvent tolerance, cyclic deformation tolerance, and EMI shielding performance were achieved by decreasing interstitial membrane porosity. Considering a possible application, the membrane also has been tested against simulated static and dynamic water flow conditions that could infer its excellent robustness which also has been confirmed by elemental analysis via ICP-MS. Thus, as of nurturing the works of the literature, it could be believed that the developed material will be an ideal alternative of flexible lightweight cellulose for versatile electronic applications.

Microbial inhibition and biosensing with multifunctional carbon dots: Progress and perspectives.

Carbon dots (CDs) and their doped counterparts including nitrogen-doped CDs (N@CDs) have been synthesized by bottom-up or top-down approaches from different precursors. The attractiveness of such emerging 2D­carbon-based nanosized materials is attributed to their excellent biocompatibility, preparation, aqueous dispersibility, and functionality. The antimicrobial, optical, and electrochemical properties of CDs have been advocated for two important biotechnological applications: bacterial eradication and sensing/biosensing. CDs as well as N@CDs act as antimicrobial agents as their surfaces encompass functional hydroxyl, carboxyl, and amino groups that generate free radicals. As a new class of photoluminescent nanomaterials, CDs can be employed in diversified analytics. CDs with surface carboxyl or amino groups form nanocomposites with nanomaterials or be conjugated with biorecognition molecules toward the development of sensors/biosensors. The deployment of conductive CDs in electrochemical sensing has also increased significantly because of their quantum size, excellent biocompatibility, enzyme-mimicking activity, and high surface area. The review also addresses the ongoing challenges and promises of CDs in pathogenesis and analytics. Perspectives on the future possibilities include the use of CDs in microbial viability assay, wound healing, antiviral therapy, and medical devices.

Carbon-Dots-Initiated Photopolymerization: An In Situ Synthetic Approach for MXene/Poly(norepinephrine)/Copper Hybrid and its Application for Mitigating Water Pollution.

The current work presents a facile and green synthesis of carbon quantum dots (C-dots), which could serve as initiators for polymerization. Herein, C-dots have been synthesized from an easily available green herb, dill leaves, by a single-step hydrothermal method. These C-dots were efficiently utilized as initiators for the photopolymerization of the polymer poly(norepinephrine) (PNE) for the first time. The photopolymerization is discussed by a factorial design, and the optimized synthesis conditions were evaluated by a third-order regression model of three reaction parameters: monomer concentration, C-dots concentration, and UV exposure time. The sign convention of the factorial design mode indicated that monomer concentration and time of exposure are the most important factors for polymerization. The photopolymerized poly(norepinephrine) was extensively studied using Fourier transform infrared (FTIR) analysis, X-ray photoelectron spectroscopy (XPS), mass spectra, scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle measurement, and thermogravimetric analysis (TGA). UV-assisted deposition of PNE on six different types of substrates was performed, and their water contact angle and surface morphology were studied to evaluate the coating. This UV-triggered polymerization technique was further applied to fabricate sandwich-like composite catalyst MXene/poly(norepinephrine)/copper nanoparticles. This catalyst displayed good performance in the reduction of 4-NP (4-nitrophenol) at ambient temperature, and the first-order rate constant of the catalysis was 9.39 × 10-3 s-1. The reusability of the catalyst was evaluated in terms of the conversion factor. After 10 catalytic cycles, the conversion to catalyze 4-NP was still greater than 91%. The catalytic performance was also evaluated in the continuous flow condition through a membrane, fabricated from a cellulose filter paper coated with MXene/poly(norepinephrine)/copper nanoparticles. This composite catalyst not only offers a practical mode for the catalytic reaction of MXene-based materials but also lays down the foundation for the development of new catalysts.

Immobilization of Heteroatom-Doped Carbon Dots onto Nonpolar Plastics for Antifogging, Antioxidant, and Food Monitoring Applications.

This work presents the facile synthesis of heteroatom-doped fluorescent carbon quantum dots (C-dots), which could serve as an antioxidant. Herein, nitrogen, phosphorous, and sulfur codoped carbon dots (NPSC-dots) have been synthesized by a single-step hydrothermal strategy. Owing to the radical scavenging activity of the NPSC-dots, they were tested against several methods as well as in practical applications. The antioxidant ability of the NPSC-dots was efficiently utilized on plastic films by coating with these NPSC-dots. For the very first time, NPSC-dots were immobilized onto nonpolar plastic films (polypropylene) via photochemical covalent grafting to extend the shelf life of food items or storage without affecting the quality of plastic films. The NPSC-dot-coated PP film with negligible deterioration of transparency was extensively studied using scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared (FTIR) analysis, X-ray photoelectron spectroscopy (XPS), contact angle measurement, and thermogravimetric analysis (TGA). The fluorescent character, antioxidant ability, and durability under different solvent systems of the coated film were examined. Also, the coated films were extensively and rigorously evaluated against simulated drastic environmental conditions to ensure the durability and antifogging application.

Green Synthesis of Multifunctional Carbon Dots with Antibacterial Activities.

Carbon dots (CDs) were obtained from medicinal turmeric leaves (Curcuma longa) by a facile one-step hydrothermal method and evaluated for their bactericidal activities against two gram-negative; Escherichia coli, Klebsiella pneumoniae, and two gram-positive counterparts; Staphylococcus aureus, S. epidermidis. The CDs exhibited spherical shapes with a mean size of 2.6 nm. The fluorescence spectra of CDs revealed intense fluorescence at λex/em = 362/429 nm with a bright blue color in an aqueous solution. The CDs showed strong photostability under various environmental conditions (pH, salt, and UV-radiation). The complete bactericidal potency of CDs was 0.25 mg/mL for E.coli and S. aureus after 8 h of exposure, while for K. pneumoniae, and S. epidermidis, the CDs at 0.5 mg/mL good antibacterial effect within 8 h and complete eradication after 24 h of exposure is observed. The release of reactive oxygen species played a crucial role in the death of the bacterial cell. The present study provides a strategy for the preparation of CDs from a medicinal plant and their potential antibacterial activities against four common contagious pathogens.

Tailor made magnetic nanolights: fabrication to cancer theranostics applications.

Nanoparticles having magnetic and fluorescent properties could be considered as a gift to materials scientists due to their unique magneto-optical qualities. Multiple component particles can overcome challenges related with a single component and unveil bifunctional/multifunctional features that can enlarge their applications in diagnostic imaging agents and therapeutic delivery vehicles. Bifunctional nanoparticles that have both luminescent and magnetic features are termed as magnetic nanolights. Herein, we present recent progress of magneto-fluorescent nanoparticles (quantum dots based magnetic nanoparticles, Janus particles, and heterocrystalline fluorescent magnetic materials), comprehensively describing fabrication strategies, types, and biomedical applications. In this review, our aim is not only to encompass the preparation strategies of these special types of magneto-fluorescent nanomaterials but also their extensive applications in bioimaging techniques, cancer therapy (targeted and hyperthermic), and sustained release of active agents (drugs, proteins, antibodies, hormones, enzymes, growth factors).

Carbon Dot Cross-Linked Gelatin Nanocomposite Hydrogel for pH-Sensing and pH-Responsive Drug Delivery.

Delivery of therapeutics to the intestinal region bypassing the harsh acidic environment of the stomach has long been a research focus. On the other hand, monitoring a system's pH during drug delivery is a crucial diagnosis factor as the activity and release rate of many therapeutics depend on it. This study answered both of these issues by fabricating a novel nanocomposite hydrogel for intestinal drug delivery and near-neutral pH sensing at the same time. Gelatin nanocomposites (GNCs) with varying concentrations of carbon dots (CDs) were fabricated through simple solvent casting methods. Here, CDs served a dual role and simultaneously acted as a cross-linker and chromophore, which reduced the usage of toxic cross-linkers. The proposed GNC hydrogel sample acted as an excellent pH sensor in the near-neutral pH range and could be useful for quantitative pH measurement. A model antibacterial drug (cefadroxil) was used for the in vitro drug release study at gastric pH (1.2) and intestinal pH (7.4) conditions. A moderate and sustained drug release profile was noticed at pH 7.4 in comparison to the acidic medium over a 24 h study. The drug release profile revealed that the pH of the release medium and the percentage of CDs cross-linking influenced the drug release rate. Release data were compared with different empirical equations for the evaluation of drug release kinetics and found good agreement with the Higuchi model. The antibacterial activity of cefadroxil was assessed by the broth microdilution method and found to be retained and not hindered by the drug entrapment procedure. The cell viability assay showed that all of the hydrogel samples, including the drug-loaded GNC hydrogel, offered acceptable cytocompatibility and nontoxicity. All of these observations illustrated that GNC hydrogel could act as an ideal pH-monitoring and oral drug delivery system in near-neutral pH at the same time.

Microwave-Synthesized Polysaccharide-Derived Carbon Dots as Therapeutic Cargoes and Toughening Agents for Elastomeric Gels.

Fluorescent carbon dots (CDs) play a versatile role in materials science. Herein, we have developed alginate-derived nitrogen-doped CDs as a drug carrier and a toughening agent for hydrogels by a microwave-assisted method. In the first phase of work, we carried out covalent conjugation of the drug onto the CD surface for controlled delivery of drug molecules, and in the second phase of work, we demonstrated how CDs could act as a toughening agent as well as a viscosity modifier for poly(acrylic acid-co-methacrylamide) copolymer hydrogels. The hydrogels were evaluated by Fourier transformed infrared spectroscopy, X-ray photoelectron spectroscopy, and solid-state nuclear magnetic resonance. The hybrid hydrogels have been tested to be mechanically robust with extraordinary stretchability (∼1200% elongation at break), recoverable to the original position (low permanent set), tunable water uptake, and thixotropic character in dynamic stress. The crosslinked structure has been evaluated through void calculation revealing gradual densification of the network with increasing CD content. Exceptional gel strength (ratio of elastic modulus to loss modulus; G'/G″) has been achieved from analogous crosslinking made by CDs. The delayed network rupturing and superstretchability could make this material a good choice for soft biomaterials and soft robotics.

Data-mining bioinformatics: suggesting Arabidopsis thaliana L-type lectin receptor kinase IX.2 (LecRK-IX.2) modulate metabolites and abiotic stress responses.

The central role of the Arabidopsis LecRK-IX.2 gene in response to biotic stress has been well established by an array of workers. So far, the role of LecRK-IX.2 in abiotic stresses has not been investigated systematically. Here, we have first investigated a comprehensive in silico survey to explore the regulation, expression pattern in responses to a wide range of abiotic stresses. The present study reveals that the LecRK-IX.2 promoter has numerous potential cis-regulatory elements (CREs) that are regulated by different stresses. AtGenExpress data elucidate that LecRK-IX.2 gene plays a potential role in responses to cold, osmotic, drought, salt, UV-B, heat, wound, and genotoxic compound. The expression profile of the co-expressed genes suggests that Arabidopsis LecRK-IX.2 gene might have a potential role in stress responses in a tissue-specific manner. Furthermore, a probable signal transduction mechanism has been described by using protein-protein interaction (PPI) dataset. Moreover, the present data-mining investigations have suggested that LecRK-IX.2 gene modulates cellular metabolites and abiotic stress responses.

Novel aspects of Cell Division Cycle and Apoptosis Regulator 1 (CCAR1) protein in Morus notabilis: an in silico approach.

Cell division cycle and apoptosis regulator 1 (CCAR1) is a deleted in breast cancer domain containing protein and their molecular roles in the animal system are well characterized. So far study on CCAR1 protein has not available in the plant system. The domain-based phylogenetic study clearly indicates that the CCAR1 protein has widely distributed throughout the plant kingdom. Intron-less CCAR1 gene encoded protein comprises five conserved domain and huge intrinsic disorder. Functional annotation of cis-regulatory elements (CREs) reveales that a wide range of potential transcription factor binding sites (TFBSs) are present in CCAR1 gene promoter. Besides that potential miRNA targets those control post-transcriptional regulations are also identified in the present study. Furthermore, gene ontogeny (GO) analysis revealed that CCAR1 have dynamic role in a wide number of cellular and metabolic processes. In this study, we first report the regulation, functional and structural property of CCAR1 transcript and protein which will help to assist crop improvement by manipulating CCAR1.

Applications of N-Doped Carbon Dots as Antimicrobial Agents, Antibiotic Carriers, and Selective Fluorescent Probes for Nitro Explosives.

The synthesis of nitrogen-doped carbon dots (N@CDs) was accomplished by a hydrothermal process using meta- phenylenediamine as a source of carbon and nitrogen. As prepared N@CDs exhibited bright blue color fluorescence emission (λex = 340 nm and λem = 420 nm) with a quantum yield of 12%. Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus were eradicated by N@CDs with a minimum inhibition concentration (MIC) of 1 and 0.75 mg/mL, respectively. The N@CDs were also proven as nanovesicles for drug molecules where the drug release displayed a sustained time-dependent profile at the physiological condition. The release of ciprofloxacin as a model drug was governed by the Korsmeyer-Peppas model, indicating ∼60% of its release from the N@CD conjugated drug system at the physiological pH. Selective analysis of trinitrophenol (TNP), a popular explosive, was achieved by fluorescence quenching of N@CDs, compared favorably with other nitrophenols. An estimated detection limit of TNP was 2.45 µM with a linear response spanning from 1 to 75 µM.

Acoustic cavitation assisted destratified clay tactoid reinforced in situ elastomer-mimetic semi-IPN hydrogel for catalytic and bactericidal application.

Ultrasonicaion is non-chemical process where acoustic waves have been targeted to aqueous medium dispersed precursor materials. In situ synthesis of silver nanoparticles anchored in hydrogel matrix has been opted via ~20 kHz frequency assisted (bath sonication) synthesis having the ultrasonication power intensity (UPI) of ~106 J/m2. Power intensity is inversely proportional to the surface area of the clay tactoids. The hydrogel have been prepared by in situ 20 kHz assisted sonochemical destratification of laponite clay tactoids which could be terminologically stated as 'top-down method'. Silver nanoparticles (AgNPs) have been deposited in the surfaces of the porous matrix of hydrogel via 'soak and irradiate' method. Soaking of silver ions into the gel matrix is welcomed due to their efficient stabilization and fast transformation towards AgNPs. AgNPs played the key role in catalytic reduction and bactericidal activity. Moreover, the prepared hydrogel has enough robust to withstand cyclic stress, uniaxial stress and oscillatory stress which have been extensively justified by the physico-mechanical characterizations. The gel supported catalyst showed first order reaction kinetics and less time consuming period during reduction of 4-nitrophenol as a model pollutant.

Converting waste Allium sativum peel to nitrogen and sulphur co-doped photoluminescence carbon dots for solar conversion, cell labeling, and photobleaching diligences: A path from discarded waste to value-added products.

Proper waste utilization in order to promote value added product is a promising scientific practice in recent era. Inspiring from the recurring trend, we propose a single step oxidative pyrolysis derived fluorescent carbon dots (C-dots) from Allium sativum peel, which is a natural, nontoxic, and waste raw material. Because of its excellent optical properties, and photostability this C-dots have been used in versatile area of applications. Due to its immediate water dispersing character, C-dots reinforced Poly(acrylic acid) (PAA) films revealed improvement in uniaxial stretching behavior and can be used as transparent sunlight conversion film. The nanocomposite film has been tested against rigorous simulated sunlight which proved almost identical sunlight conversion behavior with no photo-bleachable character which is definitely added an extra quality of transparent polymer films. Moreover, the C-dots dispersion has been used as in vitro biomarker for living cells owing to its ease in solubility, biocompatibility, non-cytotoxicity and bright fluorescence even in subcutaneous environment. For this case, adipose derived mesenchymal stem cells (ADMSCs) have been chosen and injected to rabbit ear skin to perform two-photon imaging experiment. The present work opens a new avenue towards the large-scale synthesis of bio-waste based fluorescent C-dots, paving the way for their versatile applications.