Synthesis, Hole Doping, and Electrical Properties of a Semiconducting Azatriangulene-Based Covalent Organic Framework.

Two-dimensional covalent organic frameworks (2D COFs) containing heterotriangulenes have been theoretically identified as semiconductors with tunable, Dirac-cone-like band structures, which are expected to afford high charge-carrier mobilities ideal for next-generation flexible electronics. However, few bulk syntheses of these materials have been reported, and existing synthetic methods provide limited control of network purity and morphology. Here, we report transimination reactions between benzophenone-imine-protected azatriangulenes (OTPA) and benzodithiophene dialdehydes (BDT), which afforded a new semiconducting COF network, OTPA-BDT. The COFs were prepared as both polycrystalline powders and thin films with controlled crystallite orientation. The azatriangulene nodes are readily oxidized to stable radical cations upon exposure to an appropriate p-type dopant, tris(4-bromophenyl)ammoniumyl hexachloroantimonate, after which the network's crystallinity and orientation are maintained. Oriented, hole-doped OTPA-BDT COF films exhibit electrical conductivities of up to 1.2 × 10-1 S cm-1, which are among the highest reported for imine-linked 2D COFs to date.

Tailoring On-Surface Molecular Reactions and Assembly through Hydrogen-Modified Synthesis: From Triarylamine Monomer to 2D Covalent Organic Framework.

Relative to conventional wet-chemical synthesis techniques, on-surface synthesis of organic networks in ultrahigh vacuum has few control parameters. The molecular deposition rate and substrate temperature are typically the only synthesis variables to be adjusted dynamically. Here we demonstrate that reducing conditions in the vacuum environment can be created and controlled without dedicated sources─relying only on backfilled hydrogen gas and ion gauge filaments─and can dramatically influence the Ullmann-like on-surface reaction used for synthesizing two-dimensional covalent organic frameworks (2D COFs). Using tribromo dimethylmethylene-bridged triphenylamine ((Br3)DTPA) as monomer precursors, we find that atomic hydrogen (H•) blocks aryl-aryl bond formation to such an extent that we suspect this reaction may be a factor in limiting the ultimate size of 2D COFs created through on-surface synthesis. Conversely, we show that control of the relative monomer and hydrogen fluxes can be used to produce large self-assembled islands of monomers, dimers, or macrocycle hexamers, which are of interest in their own right. On-surface synthesis of oligomers, from a single precursor, circumvents potential challenges with their protracted wet-chemical synthesis and with multiple deposition sources. Using scanning tunneling microscopy and spectroscopy (STM/STS), we show that changes in the electronic states through this oligomer sequence provide an insightful view of the 2D COF (synthesized in the absence of atomic hydrogen) as the end point in an evolution of electronic structures from the monomer.

A Semiconducting Two-Dimensional Polymer as an Organic Electrochemical Transistor Active Layer.

Organic electrochemical transistors (OECTs) are devices with broad potential in bioelectronic sensing, circuits, and neuromorphic hardware. Their unique properties arise from the use of organic mixed ionic/electronic conductors (OMIECs) as the active channel. Typical OMIECs are linear polymers, where defined and controlled microstructure/morphology, and reliable characterization of transport and charging can be elusive. Semiconducting two-dimensional polymers (2DPs) present a new avenue in OMIEC materials development, enabling electronic transport along with precise control of well-defined channels ideal for ion transport/intercalation. To this end, a recently reported 2DP, TIIP, is synthesized and patterned at 10 µm resolution as the channel of a transistor. The TIIP films demonstrate textured microstructure and show semiconducting properties with accessible oxidation states. Operating in an aqueous electrolyte, the 2DP-OECT exhibits a device-scale hole mobility of 0.05 cm2 V-1 s-1 and a µC* figure of merit of 1.75 F cm-1 V-1 s-1 . 2DP OMIECs thus offer new synthetic degrees of freedom to control OECT performance and may enable additional opportunities such as ion selectivity or improved stability through reduced morphological modulation during device operation.

Short and long-range electron transfer compete to determine free-charge yield in organic semiconductors.

Understanding how Frenkel excitons efficiently split to form free-charges in low-dielectric constant organic semiconductors has proven challenging, with many different models proposed in recent years to explain this phenomenon. Here, we present evidence that a simple model invoking a modest amount of charge delocalization, a sum over the available microstates, and the Marcus rate constant for electron transfer can explain many seemingly contradictory phenomena reported in the literature. We use an electron-accepting fullerene host matrix dilutely sensitized with a series of electron donor molecules to test this hypothesis. The donor series enables us to tune the driving force for photoinduced electron transfer over a range of 0.7 eV, mapping out normal, optimal, and inverted regimes for free-charge generation efficiency, as measured by time-resolved microwave conductivity. However, the photoluminescence of the donor is rapidly quenched as the driving force increases, with no evidence for inverted behavior, nor the linear relationship between photoluminescence quenching and charge-generation efficiency one would expect in the absence of additional competing loss pathways. This behavior is self-consistently explained by competitive formation of bound charge-transfer states and long-range or delocalized free-charge states, where both rate constants are described by the Marcus rate equation. Moreover, the model predicts a suppression of the inverted regime for high-concentration blends and efficient ultrafast free-charge generation, providing a mechanistic explanation for why Marcus-inverted-behavior is rarely observed in device studies.

Electronically Coupled 2D Polymer/MoS2 Heterostructures.

Emergent quantum phenomena in electronically coupled two-dimensional heterostructures are central to next-generation optical, electronic, and quantum information applications. Tailoring electronic band gaps in coupled heterostructures would permit control of such phenomena and is the subject of significant research interest. Two-dimensional polymers (2DPs) offer a compelling route to tailored band structures through the selection of molecular constituents. However, despite the promise of synthetic flexibility and electronic design, fabrication of 2DPs that form electronically coupled 2D heterostructures remains an outstanding challenge. Here, we report the rational design and optimized synthesis of electronically coupled semiconducting 2DP/2D transition metal dichalcogenide van der Waals heterostructures, demonstrate direct exfoliation of the highly crystalline and oriented 2DP films down to a few nanometers, and present the first thickness-dependent study of 2DP/MoS2 heterostructures. Control over the 2DP layers reveals enhancement of the 2DP photoluminescence by two orders of magnitude in ultrathin sheets and an unexpected thickness-dependent modulation of the ultrafast excited state dynamics in the 2DP/MoS2 heterostructure. These results provide fundamental insight into the electronic structure of 2DPs and present a route to tune emergent quantum phenomena in 2DP hybrid van der Waals heterostructures.

Rapid Synthesis of High Surface Area Imine-Linked 2D Covalent Organic Frameworks by Avoiding Pore Collapse During Isolation.

Imine-linked 2D covalent organic frameworks (COFs) form more rapidly than previously reported under Brønsted acid-catalyzed conditions, showing signs of crystallinity within a few minutes, and maximum crystallinity within hours. These observations contrast with the multiday reaction times typically employed under these conditions. In addition, vacuum activation, which is often used to isolate COF materials significantly erodes the crystallinity and surface area of the several isolated materials, as measured by N2 sorption and X-ray diffraction. This loss of material quality during isolation for many networks has historically obscured otherwise effective polymerization conditions. The influence of the activation procedure is characterized in detail for three COFs, with the commonly used 1,3,5-tris(4-aminophenyl)benzene-terephthaldehyde network (TAPB-PDA COF), the most prone to pore collapse. When the networks are activated carefully, rapid COF formation is general for all five of the imine-linked 2D COFs studied, with all exhibiting excellent crystallinity and surface areas, including the highest surface areas reported to date for three materials. Furthermore, to simplify the workup of COF materials, a simple nitrogen flow method provides high-quality materials without the need for specialized equipment. These insights have important implications for studying and understanding how 2D COFs form.

Rapid, Low Temperature Formation of Imine-Linked Covalent Organic Frameworks Catalyzed by Metal Triflates.

Imine-linked two-dimensional covalent organic frameworks (2D COFs) are crystalline polymer networks with enhanced stability compared to boronate ester-linked systems and with broad monomer scope. They are traditionally prepared by condensing polyfunctional aldehydes and amines at elevated temperature in a mixture of organic solvents and aqueous CH3CO2H, which catalyzes imine formation and exchange. Here we employ metal triflates, which are water-tolerant Lewis acids, to accelerate 2D imine-linked COF synthesis and improve their materials quality. Low catalyst loadings provide crystalline polymer networks in nearly quantitative yields. These conditions are demonstrated for several COFs, including heteroatom-containing systems of interest for optoelectronic applications.

Tetracyano isoindigo small molecules and their use in n-channel organic field-effect transistors.

N,N'-Dihexyl-6,6'-dicyanoisoindigo, N,N'-didecyl-5,5',6,6'-tetracyanoisoindigo, N,N'-dihexyl-5,5',6,6'-tetracyanoisoindigo, and N,N'-dihexyl-5,5',6,6'-tetracyanothienoisoindigo have been synthesised in moderate yields by the reaction of corresponding di and tetrabromo species with CuCN, with microwave heating leading to higher yields and fewer side products for the tetrasubstituted species. Di- and tetracyano substitution anodically shifts the molecular reduction potential relative to the unsubstituted cores by ca. 0.4 and 0.8 V, respectively, with the resultant values for the tetracyano derivatives (-0.58 to -0.67 V vs. FeCp2(+/0)) suggesting the possibility of air-stable electron transport. All the synthesised cyano derivatives operate in n-channel OFETs, while the tetrabromothienoisoindigo derivative functions in a p-channel transistor. The tetracyanothienoisoindigo derivative exhibits the highest field-effect electron mobility values - up to 0.04 and 0.09 cm(2) V(-1) s(-1) in spin-coated and inkjet-printed devices respectively - and OFETs incorporating this compound have been shown to operate in air without significant degradation of their mobility values in the saturation regime.

Stable solution-processed molecular n-channel organic field-effect transistors.

A new solution-processable small-molecule containing electron-poor naphthalene diimide and tetrazine moieties has been synthesized. The optimized spin-coated n-channel OFETs on glass substrate shows electron mobility value up to 0.15 cm(2) V(-1) s(-1) . Inkjet-printed OFETs are fabricated in ambient atmosphere on flexible plastic substrates, which exhibits an electron mobility value up to 0.17 cm(2) V(-1) s(-1) and also shows excellent environmental and operational stability.

Optimization of the double pump-probe technique: decoupling the triplet yield and cross section.

The double pump-probe technique (DPP), first introduced by Swatton et al. [Appl. Phys. Lett. 1997, 71, 10], is a variant of the standard pump-probe method but uses two pumps instead of one to create two sets of initial conditions for solving the rate equations, allowing a unique determination of singlet- and triplet-state absorption parameters and transition rates. We investigate the advantages and limitations of the DPP theoretically and experimentally and determine the influence of several experimental parameters on its accuracy. The accuracy with which the DPP determines the triplet-state parameters improves when the fraction of the population in the triplet state relative to the ground state is increased. To simplify the analysis of the DPP, an analytical model is presented, which is applicable to both the reverse saturable and the saturable absorption regimes. We show that the DPP is optimized by working in the saturable absorption regime. Although increased accuracy is in principle achievable by increasing the pump fluence in the reverse saturable absorption range, this can cause photoinduced decomposition in photochemically unstable molecules. Alternatively, we can tune the excitation wavelength to the spectral region of larger ground-state absorption, to achieve similar accuracy. This results in an accurate separation of triplet yield and excited-state absorption cross section. If the cross section at another wavelength is then desired, a second pump-probe experiment at that wavelength can be utilized given the previously measured triplet yield under the usually valid assumption that the triplet yield is independent of excitation wavelength.

Synthesis and linear and nonlinear absorption properties of dendronised ruthenium(II) phthalocyanine and naphthalocyanine.

Ruthenium phthalocyanines and naphthalocyanines with axial dendronised pyridine ligands show high solubility in a variety of solvents, and exhibit solid-state absorption spectra that are comparable to those obtained in dilute solution, making them interesting candidates for optical limiting in the visible.

Energy and charge transfer dynamics in fully decorated benzyl ether dendrimers and their disubstituted analogues.

We examine the photophysics of a series of molecules consisting of a benzthiadiazole core surrounded by a network of benzyl ether arms terminated by aminopyrene chromophores, which function as both energy and electron donors. Three classes of molecules are studied: dendrimers whose peripheries are fully decorated with aminopyrene donors (F), disubstituted dendrimers whose peripheries contain only two donors (D), and linear analogues in which a pair of benzyl ether arms link two donors to the central core (L). The electronic energy transfer (EET) and charge transfer (CT) rates are determined by fluorescence lifetime measurements on the energy donors and electron acceptors, respectively. In all three types of molecules, the EET time scales as the square root of the generation number G, consistent with the flexible nature of the benzyl ether framework. Transient anisotropy measurements confirm that donor-donor energy hopping does not play a major role in determining the EET times. The CT dynamics occur on the nanosecond time scale and lead to stretched exponential decays, probably due to conformational disorder. Measurements at 100 degrees C confirm that conformational fluctuations play a role in the CT dynamics. The average CT time increases with G in the L and D molecules but decreases for the F dendrimers. This divergent behavior as G increases is attributed to the competing effects of larger donor-acceptor distances (which lengthen the CT time) versus a larger number of donors (which shorten the average CT time). This work illustrates two important points about light-harvesting and charge-separation dendrimers. First, the use of a flexible dendrimer framework can lead to a more favorable scaling of the EET time (and thus the light-harvesting efficiency) with dendrimer size, relative to what would be expected for a fully extended dendrimer. Second, fully decorated dendrimers can compensate for the distance-dependent slowdown in CT rate as G increases by providing additional pathways for the CT reaction to occur.