Design and development of a new pyrromethene dye with improved photostability and lasing efficiency: theoretical rationalization of photophysical and photochemical properties.

In an attempt to develop a photostable and efficient pyrromethene compound for use in liquid dye lasers, three congeners of the commercially available pyrromethene 567 (PM567) laser dye were synthesized and their photophysical properties, lasing efficiencies, and photochemical stabilities were studied. In general the presence of an aryl group at C-8 of the pyrromethene chromophore increased the photostability. One of the congeners possessing a C-8 trimethoxyphenyl moiety showed significantly improved lasing parameters than PM567. Compared to PM567, the photochemical stability of the new dye was 2-fold, while it showed an equivalent lasing efficiency to that of PM567 at a significantly lower concentration. The increased photostability of these new dye molecules could be explained by theoretical calculation on their capacity to generate singlet oxygen ((1)O(2)) and probability of reaction with (1)O(2). Our calculations were in agreement with the experimental results and indicated that a systematic design of new derivatives of pyrromethene chromophore might lead to improved laser dye molecules.

Role of the stimulated-emission rate in the photostability of solid-state dye lasers.

The lasing and photostability characteristics of Rhodamine 6G and Pyrromethene 567 dyes dispersed in polymeric host materials have been investigated as a function of the intensities of incident pump and signal beams in a longitudinally pumped dye laser in an oscillator-amplifier configuration. A substantial reduction in the rate of photodegradation was observed under lasing conditions and with increasing signal intensity in a dye amplifier, establishing that the service lives of these materials improve with an increase in the rate of stimulated emission. We observed approximately 62% amplifier efficiency at 2 Hz operation and 10% reduction in amplifier efficiency at 10 Hz operation after exposure of 72,000 pulses by use of a Pyrromethene disk.

Spectral characteristics of a binary dye-mixture laser.

We have investigated laser action in a binary mixture of dyes, Rh-6G and DCM, resulting in tunable laser emission over an extended frequency region. The two dyes absorb the same pump radiation but fluoresce over frequency ranges that are shifted with respect to each other, thereby resulting in extended tunability. Following a time-dependent analysis of a rate-equation model that describe the operation of such a laser, theoretical estimates for optimum dye concentrations and the corresponding extension of the laser tuning range have been obtained.

High-repetition-rate, narrow-band dye lasers with water as a solvent for dyes.

The performance of a copper vapor laser-pumped narrow-band dye laser in oscillator-amplifier configuration with water-based binary mixture solvents is described. Although oscillator efficiency in water-surfactant (sodium lauryl sulfate) solvent was comparable with that that employed pure ethanolic solvent, amplifier efficiency was found to be lower. Experiments that were carried out with vertically polarized pump beams and either horizontally or vertically polarized signal beams show that, in case of both the pump and signal having orthogonal polarization (horizontal) and same polarization (vertical), the extraction efficiency for both ethanolic and water-micelle media increased substantially from 15.7% to 18.5% and from 10% to 12.5%, respectively. However, the relative difference remained nearly the same, indicating that a slower orientational diffusion of excited dye molecules in a micellar medium is not responsible for a decrease in amplifier efficiency. Amplifier efficiency comparable with that containing ethanolic dye solutions could be obtained with a binary solvent that comprises a mixture of water and about 30% n-propanol. The performances of two efficient dyes, Rhodamine-6G and Kiton Red S, using water-based solvents were studied.