Rapid Detection of Tumor Necrosis Factor-Alpha Using Quantum Dot-Based Optical Aptasensor.

This paper reports an optical "TURN OFF" aptasensor, which is comprised of a deoxyribonucleic acid aptamer attached to a quantum dot on the terminus and gold nanoparticle on the terminus. The photoluminescence intensity is observed to decrease upon progressive addition of the target protein tumor necrosis factor-alpha (TNF- ) to the sensor. For PBS-based TNF- samples, the beacon exhibited 19%-20% quenching at around 22 nM concentration. The photoluminescence intensity and the quenching efficiency showed a linear decrease and a linear increase, respectively, between 0 to 22.3 nM TNF- . The detection limit of the sensor was found to be 97.2 pM. Specificity test results determined that the sensor has higher selectivity toward TNF- than other control proteins such as C-reactive protein, albumin, and transferrin. The beacon successfully detected different concentrations of TNF- in human serum-based samples exhibiting around 10% quenching efficiency at 12.5 nM of the protein.

Terahertz vibrational signature of bacterial spores arising from nanostructure decorated endospore surface.

This theoretical effort is the first to explore the possible hypothesis that terahertz optical activity of Bacillus spores arises from normal vibrational modes of spore coat subcomponents in the terahertz frequency range. Bacterial strains like Bacillus and Clostridium form spores with a hardened coating made of peptidoglycan to protect its genetic material in harsh conditions. In recent years, electron microscopy and atomic force microscopy has revealed that bacterial spore surfaces are decorated with nanocylinders and honeycomb nanostructures. In this article, a simple elastic continuum model is used to describe the vibration of these nanocylinders mainly in Bacillus subtilis, which also leads to the conclusion that the terahertz signature of these spores arises from the vibration of these nanostructures. Three vibrating modes: radial/longitudinal, torsional and flexural, have been identified and discussed for the nanocylinders. The effect of bound water, which shifts the vibration frequency, is also discussed. The peptidoglycan molecule consists of polar and charged amino acids; hence, the sporal surface local vibrations interact strongly with the terahertz radiation.

Aptasensor based optical detection of glycated albumin for diabetes mellitus diagnosis.

Glycated albumin (GA) has been reported as an important biomarker for diabetes mellitus. This study investigates an optical sensor comprised of deoxyribonucleic acid (DNA) aptamer, semiconductor quantum dot and gold (Au) nanoparticle for the detection of GA. The system functions as a 'turn on' sensor because an increase in photoluminescence intensity is observed upon the addition of GA to the sensor. This is possibly because of the structure of the DNA aptamer, which folds to form a large hairpin loop before the addition of the analyte and is assumed to open up after the addition of target to the sensor in order to bind to GA. This pushes the quantum dot and the Au nanoparticle away causing an increase in photoluminescence. A linear increase in photoluminescence intensity and quenching efficiency of the sensor is observed as the GA concentration is varied between 0-14 500 nM. Time based photoluminescence studies with the sensor show the decrease in binding rate of the aptamer to the target within a specific time period. The sensor was found to have a higher selectivity towards GA than other control proteins. Further investigation of this simple sensor with greater number of clinical samples can open up avenues for an efficient diagnosis and monitoring of diabetes mellitus when used in conjunction with the traditional method of glucose level monitoring.

Graphene oxide and DNA aptamer based sub-nanomolar potassium detecting optical nanosensor.

Quantum-dot (QD) based nanosensors are frequently used by researchers to detect small molecules, ions and different biomolecules. In this article, we present a sensor complex/system comprised of deoxyribonucleic acid (DNA) aptamer, gold nanoparticle and semiconductor QD, attached to a graphene oxide (GO) flake for detection of potassium. As reported herein, it is demonstrated that QD-aptamer-quencher nanosensor functions even when tethered to GO, opening the way to future applications where sensing can be accomplished simultaneously with other previously demonstrated applications of GO such as serving as a nanocarrier for drug delivery. Herein, it is demonstrated that the DNA based thrombin binding aptamer used in this study undergoes the conformational change needed for sensing even when the nanosensor complex is anchored to the GO. Analysis with the Hill equation indicates the interaction between aptamer and potassium follows sigmoidal Hill kinetics. It is found that the quenching efficiency of the optical sensor is linear with the logarithm of concentration from 1 pM to 100 nM and decreases for higher concentration due to unavailability of aptamer binding sites. Such a simple and sensitive optical aptasensor with minimum detection capability of 1.96 pM for potassium ion can also be employed in-vitro detection of different physiological ions, pathogens and disease detection methods.

Molecular beacon anchored onto a graphene oxide substrate.

In this article, we report a graphene oxide-based nanosensor incorporating semiconductor quantum dots linked to DNA-aptamers that functions as a 'turn-off' fluorescent nanosensor for detection of low concentrations of analytes. A specific demonstration of this turn-off aptasensor is presented for the case of the detection of mercury (II) ions. In this system, ensembles of aptamer-based quantum-dot sensors are anchored onto graphene oxide (GO) flakes which provide a platform for analyte detection in the vicinity of GO. Herein, the operation of this ensemble-based nanosensor is demonstrated for mercury ions, which upon addition of mercury, quenching of the emission intensity from the quantum dots is observed due to resonance energy transfer between quantum dots and the gold nanoparticle connected via a mercury target aptamer. A key result is that the usually dominant effect of quenching of the quantum dot due to close proximity to the GO can be reduced to negligible levels by using a linker molecule in conjunctions with the aptamer-based nanosensor. The effect of ionic concentration of the background matrix on the emission intensity was also investigated. The sensor system is found to be highly selective towards mercury and exhibits a linear behavior (r 2 > 0.99) in the nanomolar concentration range. The detection limit of the sensor towards mercury with no GO present was found to be 16.5 nM. With GO attached to molecular beacon via 14 base, 35 base, and 51 base long linker DNA, the detection limit was found to be 38.4 nM, 9.45 nM, and 11.38 nM; respectively.

A Graphene and Aptamer Based Liquid Gated FET-Like Electrochemical Biosensor to Detect Adenosine Triphosphate.

Here we report successful demonstration of a FET-like electrochemical nano-biosensor to accurately detect ultralow concentrations of adenosine triphosphate. As a 2D material, graphene is a promising candidate due to its large surface area, biocompatibility, and demonstrated surface binding chemistries and has been employed as the conducting channel. A short 20-base DNA aptamer is used as the sensing element to ensure that the interaction between the analyte and the aptamer occurs within the Debye length of the electrolyte (PBS). Significant increase in the drain current with progressive addition of ATP is observed whereas for control experiments, no distinct change in the drain current occurs. The sensor is found to be highly sensitive in the nanomolar (nM) to micromolar ( µM) range with a high sensitivity of 2.55 µA (mM) (-1), a detection limit as low as 10 pM, and it has potential application in medical and biological settings to detect low traces of ATP. This simplistic design strategy can be further extended to efficiently detect a broad range of other target analytes.

Biomedical Applications of Quantum Dots, Nucleic Acid-Based Aptamers, and Nanostructures in Biosensors.

This review is a survey of the biomedical applications of semiconductor quantum dots, nucleic acid-based aptamers, and nanosensors as molecular biosensors. It focuses on the detection of analytes in biomedical applications using (1) advances in molecular beacons incorporating semiconductor quantum dots and nanoscale quenching elements; (2) aptamer-based nanosensors on a variety of platforms, including graphene; (3) Raman scattering and surface-enhanced Raman scattering (SERS) using nanostructures for enhanced SERS spectra of biomolecules, including aptamers; and (4) the electrical and optical properties of nanostructures incorporated into molecular beacons and aptamer-based nanosensors. Research done at the University of Illinois at Chicago (UIC) is highlighted throughout since it emphasizes the specific approaches taken by the bioengineering department at UIC.