ABSTRACT
Plasma nitriding of the Ti-6Al-4V alloy (TA) sample was carried out in a plasma reactor with a hot wall vacuum chamber. For ease of comparison these plasma nitrided samples were termed as TAPN. The TA and TAPN samples were characterized by XRD, Optical microscopy, FESEM, TEM, EDX, AFM, nanoindentation, micro scratch, nanotribology, sliding wear resistance evaluation and in vitro cytotoxicity evaluation techniques. The experimental results confirmed that the nanohardness, Young's modulus, micro scratch wear resistance, nanowear resistance, sliding wear resistance of the TAPN samples were much better than those of the TA samples. Further, when the data are normalized with respect to those of the TA alloy, the TAPN sample showed cell viability about 11% higher than that of the TA alloy used in the present work. This happened due to the formation of a surface hardened embedded nitrided metallic alloy layer zone (ENMALZ) having a finer microstructure characterized by presence of hard ceramic Ti2N, TiN etc. phases in the TAPN samples, which could find enhanced application as a bioimplant material.
Subject(s)
Alloys/chemistry , Biocompatible Materials/chemistry , Materials Testing , Surface Properties , Titanium/chemistry , Animals , Cell Survival , Ceramics , Friction , Hardness , Humans , Hydrogen-Ion Concentration , Mice , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Microscopy, Electron, Transmission , NIH 3T3 Cells , Nitrogen/chemistry , Plasma Gases , Pressure , Prostheses and Implants , Prosthesis Design , Stress, Mechanical , X-Ray DiffractionABSTRACT
Laser Engineered Net Shaping (LENS™), a commercially available additive manufacturing technology, has been used to fabricate dense equiatomic NiTi alloy components. The primary aim of this work is to study the effect of laser power and scan speed on microstructure, phase constituents, hardness and corrosion behavior of laser processed NiTi alloy. The results showed retention of large amount of high-temperature austenite phase at room temperature due to high cooling rates associated with laser processing. The high amount of austenite in these samples increased the hardness. The grain size and corrosion resistance were found to increase with laser power. The surface energy of NiTi alloy, calculated using contact angles, decreased from 61 mN/m to 56 mN/m with increase in laser energy density from 20 J/mm(2) to 80 J/mm(2). The decrease in surface energy shifted the corrosion potentials to nobler direction and decreased the corrosion current. Under present experimental conditions the laser power found to have strong influence on microstructure, phase constituents and corrosion resistance of NiTi alloy.
