Peri-implantitis Diagnosis and Prognosis Using Biomarkers: A Systematic Literature Review.

PURPOSE: To summarize the latest scientific literature regarding the concentrations of biomarkers in saliva and peri-implant crevicular fluid (PICF) of healthy implant (HI) patients and patients with peri-implant mucositis (PIM) and peri-implantitis (PI). MATERIALS AND METHODS: The literature review was performed according to PRISMA guidelines. The databases used were PubMed MEDLINE, ScienceDirect, and Cochrane Library. A combination of keywords was used, and selection criteria were applied. Selected articles were published between February 1, 2017, and February 1, 2022, written in English, conducted in humans, and examined the levels of saliva and PICF biomarkers in PI patients and compared them to HI/PIM patients. RESULTS: A total of 16 publications were selected, involving a total of 1,117 patients with 1,346 implants. Qualitative analysis revealed 49 different biomarkers, the levels of which were compared between groups. After evaluating the most frequently studied biomarkers, significantly higher values of IL-1ß, RANKL, sRANKL, IL-6, TNF-α, TNFSF12, MMP2, and MMP8 levels were observed in the PI group than in the HI group. CONCLUSIONS: Of all 49 biomarkers evaluated, IL-1ß and RANKL have potentially the highest diagnostic significance in the assessment of peri-implant inflammatory conditions, as differences were observed between all three groups (HI < PIM < PI), but data from current publications were not fully sufficient to provide strong evidence.

Assessment Results of Dental Students' Knowledge about Bisphosphonates and Bisphosphonate-Related Osteonecrosis of the Jaw.

Objectives: The aim of this cross-sectional study is to evaluate Lithuanian fourth- and fifth-year dental students' knowledge about bisphosphonates and bisphosphonate-related osteonecrosis of the jaw. Material and Methods: The anonymous survey using a questionnaire was conducted from February to March 2022. The survey was sent to 173 students at Lithuanian University of Health Sciences (LSMU) and 107 of them were completed. It consisted of student data, questions about the main properties of bisphosphonates, bisphosphonate-related osteonecrosis of the jaw (BRONJ), and the necessity of additional studies for students. Chi-square test and Cramér's V coefficient were used for the analysis of variables. Results: Most of the fifth-year students knew the main properties of bisphosphonates and what diseases they are used to treat. Twenty fifth-year students (33.9%) knew the accurate definition of BRONJ, while only 11 fourth-year students (22.9%) chose the same correct answer. Statistically significant (P < 0.05) data were found about the knowledge of main properties of bisphosphonates. The vast majority of fourth- and fifth-year students (39 [81.3%] and 45 [76.3%]), agreed that the University should provide more information about bisphosphonates. Conclusions: The study revealed that fifth-year students demonstrated better knowledge about bisphosphonates compared to fourth-year students and this was due to a curriculum supplemented with information about this pathology. The overall findings of this research suggest that Universities need to expand their student curricula by providing more knowledge about bisphosphonates and its relation to bisphosphonate-related osteonecrosis of the jaw.

Comparison of Classifications and Indexes for Extraction Socket and Implant Supported Restoration in the Aesthetic Zone: a Systematic Review.

Objectives: The primary objective of the present systematic review is to test the hypothesis - the revision of the complexity of the extraction sockets morphology classifications will reveal the most important parameters for implant aesthetic and functional success in case of immediate dental implant placement in aesthetic zone. The secondary objective is to revise the most important parameters of aesthetic indexes created for implant-supported restoration in aesthetic zone. Material and Methods: MEDLINE (PubMed) and Cochrane Library search in combination with hand-search of relevant journals was conducted including human studies published in English between 1 January 2005 and 1 February 2022. After evaluation of the titles and abstracts in accordance with the PRISMA guidelines, risk-of-bias assessment was evaluated and data was extracted from the full papers. Results: Electronic and hand searching resulted in 477 entries. Five systematic reviews, research syntheses and 7 prospective studies met the inclusion criteria and were included in the final data synthesis. Selected articles reported the different classifications complexity of the extraction sockets morphology and aesthetic indexes for implant supported restoration in aesthetic zone. Conclusions: The most important parameters for implant aesthetics and functional success, incorporated in classifications of extraction sockets are facial soft tissue level and quality, gingival biotype, keratinized gingival, mesial and distal papillae appearance, buccal bone level and thickness, labial and buccal bone plates damage and bone lesions. The most important aesthetic indexes parameters are soft tissue contour position, including colour and texture, interdental papilla, mesial and distal interproximal bone height, gingival biotype.

Novel Yttria-Stabilized Zirconium Oxide and Lithium Disilicate Coatings on Titanium Alloy Substrate for Implant Abutments and Biomedical Application.

This study aimed to create novel bioceramic coatings on a titanium alloy and evaluate their surface properties in comparison with conventional prosthetic materials. The highly polished titanium alloy Ti6Al4V (Ti) was used as a substrate for yttria-stabilized zirconium oxide (3YSZ) and lithium disilicate (LS2) coatings. They were generated using sol-gel strategies. In comparison, highly polished surfaces of Ti, yttria-stabilized zirconium oxide (ZrO2), polyether ether ketone (PEEK) composite, and poly(methyl methacrylate) (PMMA) were utilized. Novel coatings were characterized by an X-ray diffractometer (XRD) and scanning electron microscope (SEM). The roughness by atomic force microscope (AFM), water contact angle (WCA), and surface free energy (SFE) were determined. Additionally, biocompatibility and human gingival fibroblast (HGF) adhesion processes (using a confocal laser scanning microscope (CLSM)) were observed. The deposition of 3YSZ and LS2 coatings changed the physicochemical properties of the Ti. Both coatings were biocompatible, while Ti-3YSZ demonstrated the most significant cell area of 2630 µm2 (p ≤ 0.05) and the significantly highest, 66.75 ± 4.91, focal adhesions (FAs) per cell after 24 h (p ≤ 0.05). By contrast, PEEK and PMMA demonstrated the highest roughness and WCA and the lowest results for cellular response. Thus, Ti-3YSZ and Ti-LS2 surfaces might be promising for biomedical applications.

Molecular and Cellular Aspects of Socket Healing in the Absence and Presence of Graft Materials and Autologous Platelet Concentrates: a Focused Review.

OBJECTIVES: The present manuscript aims to critically detail the physiologic process of socket healing, in the absence or presence of grafting materials or platelet concentrates, addressing the associated molecular and cellular events that culminate in the restoration of the lost tissue architecture and functionality. MATERIAL AND METHODS: An electronic search in the National Library of Medicine database MEDLINE through its online site PubMed and Web of Science from inception until May 2019 was conducted to identify articles concerning physiologic process of socket healing, in the absence or presence of grafting materials or platelet concentrates. The search was restricted to English language articles without time restriction. Additionally, a hand search was carried out in oral surgery, periodontology and dental implants related journals. RESULTS: In total, 122 literature sources were obtained and reviewed. The detailed biological events, at the molecular and cellular level, that occur in the alveolus after tooth extraction and socket healing process modulated by grafting materials or autologous platelet concentrates were presented as two entities. CONCLUSIONS: Tooth extraction initiates a convoluted set of orderly biological events in the alveolus, aiming wound closure and socket healing. The healing process comprises a wide range of events, regulated by the interplay of cytokines, chemokines and growth factors that determine cellular recruitment, proliferation and differentiation in the healing milieu, in a space- and time-dependent choreographic interplay. Additionally, the healing process may further be modulated by the implantation of grafting materials or autologous platelet concentrates within the tooth socket, aiming to enhance the regenerative outcome.

The 2nd Baltic Osseointegration Academy and Lithuanian University of Health Sciences Consensus Conference 2019. Summary and Consensus Statements: Group I - Biological Aspects of Tooth Extraction, Socket Healing and Indications for Socket Preservation.

INTRODUCTION: The task of Group I was to review and update the existing data concerning the physiologic process of socket healing, in the absence or presence of grafting materials or platelet concentrates, addressing the associated molecular and cellular events that culminate in the restoration of the lost tissue architecture and functionality. The second task was to review current literature concerning extraction socket classification immediately following tooth extraction and the rationales for socket preservation/augmentation procedures and with reference to it suggest novel clinical decision tree for extraction socket preservation/augmentation in aesthetic and non-aesthetic area. MATERIAL AND METHODS: The main areas indicated by this group were as follows: socket healing process, including haemostasis and coagulation, inflammatory phase, proliferative phase, bone tissue modelling and remodelling; socket healing with graft materials and autologous platelet concentrates; extraction socket classifications; indications and reasons for extraction socket preservation/augmentation. The systematic reviews and/or meta-analyses were registered in PROSPERO, an international prospective register of systematic reviews: http://www.crd.york.ac.uk/PROSPERO/. The literature in the corresponding areas of interest was screened and reported following the PRISMA (Preferred Reporting Item for Systematic Review and Meta-Analysis) Statement: http://www.prisma-statement.org/. Method of preparation of the systematic reviews, based on comprehensive search strategies, was discussed and standardized. The summary of the materials and methods employed by the authors in preparing the systematic reviews and/or meta-analyses is presented in Preface chapter. RESULTS: The results and conclusions of the review process are presented in the respective papers. One theoretical review-analysis and one systematic review were performed. The group's general commentaries, consensus statements, clinical recommendations and implications for research are presented in this article.

A classification for assessing surgical difficulty in the extraction of mandibular impacted third molars: Description and clinical validation.

OBJECTIVE: Surgical time prediction is an important factor to plan both clinical and organizational aspects of mandibular impacted third molar extraction. Many classifications have been proposed over the years, but their accuracy in surgical time prediction remained questionable. The present study introduced a modification of Juodzbalys and Daugela (JD) classification, and had the aim to validate its effectiveness in predicting the duration of the surgery. METHOD AND MATERIALS: Three centers treated patients needing impacted mandibular third molar extraction, following inclusion and exclusion criteria. Extractions were performed following a standardized approach, and surgical time was recorded. A blinded assessor assigned scores to each extracted tooth, according to original and modified JD classifications. Differences among the operators were evaluated though Kruskal-Wallis test, and backward multiple linear regressions were performed to evaluate the variables associated with surgical time, considered as the main outcome of the study. RESULTS: 124 patients were treated with mandibular third molar extraction. Mean surgical time was 24.1 ± 22.2 minutes, with significant differences among the centers (P = .001). Surgical times among groups derived from both former and modified JD classifications were significantly different (P = .002 and P = .001, respectively). In the multivariate analysis, the statistical model including modified JD score was more efficient than the model with former JD score in predicting surgical time (R2 = .204 and R2 = .126, respectively). CONCLUSION: Modified JD classification resulted in a reliable tool for predicting surgical time of impacted mandibular third molar extraction; this could represent an adjunctive tool for clinician and patient in the decision-making process.

Cuttlebone as a Marine-Derived Material for Preparing Bone Grafts.

The use of synthetic materials for biomedical applications still presents issues owing to the potential for unfavourable safety characteristics. Currently, there is increasing interest in using natural, marine-derived raw materials for bone tissue engineering. In our study, the endoskeleton of the mollusc Sepia, i.e. cuttlebone (CB), was used with regenerated cellulose (RC) to prepare three-dimensional composite bone grafts. CB microparticles were mechanically immobilised within a cellulose gel, resulting in a macroporous structure upon lyophilisation. The interconnected porous structure of the regenerated cellulose/cuttlebone (RC/CB) composite was evaluated by micro-computed tomography. The porosity of the composite was 80%, and the pore size predominantly ranged from 200 to 500 µm. The addition of CB microparticles increased the specific scaffold surface by almost threefold and was found to be approximately 40 mm-1. The modulus of elasticity and compressive strength of the RC/CB composite were 4.0 ± 0.6 and 22.0 ± 0.9 MPa, respectively. The biocompatibility of the prepared RC/CB composite with rat hepatocytes and extensor digitorum longus muscle tissue was evaluated. The obtained data demonstrated that both the composite and cellulose matrix samples were non-cytotoxic and had no damaging effects. These results indicate that this RC/CB composite is a novel material suitable for bone tissue-engineering applications.

Influence of leukocyte- and platelet-rich fibrin (L-PRF) on the outcomes of impacted mandibular third molar removal surgery: A split-mouth randomized clinical trial.

OBJECTIVES: The purpose of this study was to evaluate the influence of leukocyte- and platelet-rich fibrin (L-PRF) on impacted mandibular third molar (IMTM) extraction wound healing, patient postoperative discomfort, and incidence of alveolar osteitis. METHOD AND MATERIALS: Thirty-four patients (20 female, 14 male) who met the inclusion criteria for this split-mouth randomized clinical trial were enrolled and 30 patients completed the study. Patients were randomized and underwent bilateral IMTM surgical extractions. Following extraction, one socket randomly received L-PRF, and the other socket served as a regular blood clot control. Postoperatively, the soft tissue healing index (HI), pain according to visual analog scale (VAS), facial swelling using a horizontal and vertical guide, and incidence of alveolar osteitis were evaluated 1, 3, 7, and 14 days after surgery. RESULTS: Sites treated with L-PRF resulted in improved HI (P = .001) and lower pain VAS scores (P = .001) in the first postoperative week. Significant reduction of facial swelling was recorded on first (P = .035) and third (P = .023) postoperative days in L-PRF sites versus controls, ceasing to nonsignificant difference at day 7 (P = .224). None of the L-PRF sites and four control sites were affected by alveolar osteitis (P = .001). CONCLUSION: Within the limitations of this split-mouth study, L-PRF improved soft tissue healing and reduced postoperative pain, swelling, and incidence of alveolar osteitis after IMTM surgical extractions.

Novel cellulose/hydroxyapatite scaffolds for bone tissue regeneration: In vitro and in vivo study.

Cellulose scaffolds containing nano- or micro-hydroxyapatite (nHA or µHA) were prepared by the regeneration of cellulose from its acetylated derivative and the mechanical immobilization of inorganic particles, followed by freeze-drying. Microtomographic (micro-computed tomography) evaluation revealed that both scaffolds presented a highly interconnected porous structure, with a mean pore diameter of 490 ± 94 and 540 ± 132 µm for cellulose/nHA and cellulose/µHA, respectively. In vitro and in vivo characterizations of the developed scaffolds were investigated. Commercially available bone allograft was used as a control material. For the in vitro characterization, osteoblastic cell cultures were used and characterized over time to evaluate cell adhesion, metabolic activity, and functional output (alkaline phosphatase activity and osteoblastic gene expression). The results revealed greater spreading cell distribution alongside an increased number of filopodia, higher MTT values, and significantly increased expression of osteoblastic genes (Runx-2, alkaline phosphatase, and BMP-2) for cellulose/nHA, compared with cellulose/µHA and the control. The in vivo biocompatibility was evaluated in a rabbit calvarial defect model. The investigated scaffolds were implanted in circular rabbit calvaria defects. Four- and 12-week bone biopsies were investigated using micro-computed tomography and histological analysis. Although both cellulose/HA scaffolds outperformed the assayed control, a significantly higher amount of newly formed mineralized tissue was found within the defects loaded with cellulose/nHA. Within the limitations of this study, the developed cellulose/HA scaffolds showed promising results for bone regeneration applications. The biological response to the scaffold seems to be greatly dependent on the HA particles' characteristics, with cellulose scaffolds loaded with nHA eliciting an enhanced bone response.

Surgical Non-Regenerative Treatments for Peri-Implantitis: a Systematic Review.

OBJECTIVES: The purposes of the present study were 1) to systematically review the literature on the surgical non-regenerative treatments of peri-implantitis and 2) to determine a predictable therapeutic option for the clinical management of peri-implantitis lesions. MATERIAL AND METHODS: The study search was performed on primary database MEDLINE and EMBASE from 2005 until 2016. Sequential screenings at the title, abstract, and full-text levels were performed. Clinical human studies in the English language that had reported changes in probing depth (PD) and/or bleeding on probing (BOP) and/or radiologic marginal bone level changes after peri-implantitis surgical non-regenerative treatment at 6-month follow-up or longer were included accordingly PRISMA guidelines. RESULTS: The first electronic and hand search resulted in 765 citations. From 16 full-text articles reviewed, 6 were included in this systematic review. Surgical non-regenerative methods were found to be efficient in reducing clinical parameters. BOP and PD values were significantly decreased following implantoplasty and systematic administration of antibacterials, but not after local application of chemical compounds or diode laser. Similarly, significant improvement in clinical and radiographic parameters was found only after implantoplasty compared with resective surgery alone. We found significant heterogeneity in study designs and treatments provided among the pooled studies. All of the studies revealed an unclear or high risk of bias. CONCLUSIONS: Surgical non-regenerative treatment of peri-implantitis was found to be effective to reduce the soft tissue inflammation and decrease probing depth. More randomized controlled clinical trials are needed to assess the efficacy of surgical non-regenerative therapy of peri-implantitis.

Surgical Regenerative Treatments for Peri-Implantitis: Meta-analysis of Recent Findings in a Systematic Literature Review.

OBJECTIVES: The purpose of the present study was to systematically review the literature on the surgical regenerative treatment of the peri-implantitis and to determine an effective therapeutic predictable option for their clinical management. MATERIAL AND METHODS: The study searched MEDLINE and EMBASE databases from 2006 to 2016. Clinical human studies that had reported changes in probing depth (PD) and/or bleeding on probing (BOP) and/or radiologic marginal bone level (RBL) changes after peri-implantitis surgical treatment at 12-month follow-up or longer were included accordingly to PRISMA guidelines. RESULTS: The initial search obtained 883 citations. After screening and determination of eligibility, 18 articles were included in the review. The meta-analysis of selected studies revealed that the weighted mean RBL fill was 1.97 mm (95% confidence interval [CI] = 1.58 to 2.35 mm), PD reduction was 2.78 mm (95% CI = 2.31 to 3.25 mm), and BOP reduced by 52.5% (95% CI = 41.6 to 63.1%). Defect fill in studies using and not using barrier membranes for graft coverage was 1.86 mm (95% CI = 1.36 to 2.36 mm) and 2.12 mm (95% CI = 1.46 to 2.78 mm) correspondingly. High heterogeneity among the studies regarding defects morphology, surgical protocols, and selection of biomaterials were found. CONCLUSIONS: All included studies underlined an improvement of clinical conditions after the surgical regenerative treatment of peri-implantitis, however, there is a lack of scientific evidence in the literature regarding the superiority of the regenerative versus non-regenerative surgical treatment. The presence of a barrier membrane or submergence in the regenerative procedure does not seem to be fundamental in order to obtain clinical success of the surgery.

The 1st Baltic Osseointegration Academy and Lithuanian University of Health Sciences Consensus Conference 2016. Summary and Consensus Statements: Group III - Peri-Implantitis Treatment.

INTRODUCTION: The task of Group 3 was to review and update the existing data concerning non-surgical, surgical non-regenerative and surgical regenerative treatment of peri-implantitis. Special interest was paid to the preventive and supporting therapy in case of peri-implantitis. MATERIAL AND METHODS: The main areas of interest were as follows: effect of smoking and history of periodontitis, prosthetic treatment mistakes, excess cement, overloading, general diseases influence on peri-implantitis development. The systematic review and/or meta-analysis were registered in PROSPERO, an international prospective register of systematic reviews: http://www.crd.york.ac.uk/PROSPERO/. The literature in the corresponding areas of interest was searched and reported using the PRISMA (Preferred Reporting Item for Systematic Review and Meta-Analysis) Statement: http://www.prisma-statement.org/. The method of preparation of systematic reviews of the literature based on comprehensive search strategies was discussed and standardized. The summary of the materials and methods employed by the authors in preparing the systematic review and/or meta-analysis is presented in Preface chapter. RESULTS: The results and conclusions of the review process are presented in the respective papers. The group's general commentaries, consensus statements, clinical recommendations and implications for research are presented in this article.

Treatment of peri-implantitis: Meta-analysis of findings in a systematic literature review and novel protocol proposal.

OBJECTIVE: To test the effectiveness of nonsurgical and surgical treatment methods for clinical and radiographic peri-implantitis symptoms resolution with respect to pocket probing depth (PD), bleeding on probing (BOP), and marginal bone-loss reduction (RBL); to propose guidelines for managing peri-implantitis. METHOD AND MATERIALS: An electronic literature search was conducted of the MEDLINE and EMBASE databases for articles published between 2002 and 2015. Sequential screening at the title/abstract and full-text levels was performed. Clinical human studies in the English language that had reported changes in PD and/or BOP and/or radiologic marginal bone level (RBL) changes after peri-implantitis treatment at 6-month follow-up or longer were included. A meta-analysis was performed using the random-effects model on the selected qualifying articles. RESULTS: The search resulted in 29 articles meeting the inclusion criteria. The meta-analysis demonstrated improved BOP values (P = .001; OR = 1.567; 95% CI, 1.405 to 1.748) after the nonsurgical treatment but did not reveal a statistically significant difference in the PD changes (P = .8093; standardized mean difference [SMD] = 0.346 mm; 95% CI, 0.181 to 0.512). There was a significant improvement in PD (P < .001; SMD = 1.647 mm; 95% CI, 1.414 to 1.880) and BOP values (P < .001; OR = 4.044; 95% CI, 3.571 to 4.381) after surgical treatment and an intrabony defect fill was found to be 1.66 mm (1.0) using a regenerative treatment modality. Our meta-analysis confirms there is a significant reduction in RBL after nonsurgical (P = 0.037; SMD = 0.157 mm; 95% CI, -0.183 to 0.496), resective (P = .0212; SMD = -0.116 mm; 95% CI, -0.433 to 0.201), and regenerative (P = .0305; SMD = 1.703 mm; 95% CI, 1.266 to 2.139) surgical treatment. A novel complex management and maintenance (CMM) six-step protocol is thus suggested for treatment of peri-implantitis. CONCLUSION: Regenerative surgical treatment of peri-implantitis was found to be most effective. A novel six-step protocol aimed at managing patients with peri-implantitis can be a useful tool in peri-implantitis treatment.

Accuracy of digital radiography and cone beam computed tomography on periapical radiolucency detection in endodontically treated teeth.

OBJECTIVES: The aim of the present study was to compare the accuracy of intraoral digital periapical radiography and cone beam computed tomography in the detection of periapical radiolucencies in endodontically treated teeth. MATERIAL AND METHODS: Radiographic images (cone beam computed tomography [CBCT] scans and digital periapical radiography [PR] images) from 60 patients, achieved from September 2008 to July 2013, were retrieved from databases of the Department of Oral Diseases, Lithuanian University of Health Sciences. Twenty patients met inclusion criteria and were selected for further evaluation. RESULTS: In 20 patients (42.4 [SD 12.1] years, 65% men and 35% women) a total of 35 endodontically treated teeth (1.75 [SD 0.91]; 27 in maxilla and 8 in mandible) were evaluated. Overall, it was observed a statistical significant difference between the number of periapical lesions observed in the CBCT (n = 42) and radiographic (n = 24) examinations (P < 0.05). In molar teeth, CBCT identify a significantly higher amount of periapical lesions than with the radiographic method (P < 0.05). There were significant differences between CBCT and PR in the mean number of lesions identified per tooth (1.2 vs 0.66, P = 0.03), number of teeth with lesions (0.71 vs 0.46, P = 0.03) and number of lesions identified per canal (0.57 vs 0.33, P = 0.005). Considering CBCT as "gold standard" in lesion detection with the sensitivity, specificity and accuracy considering as score 1, then the same parameters of PR were 0.57, 1 and 0.76 respectively. CONCLUSIONS: Within the limitations of the present study, it can be concluded that cone beam computed tomography scans were more accurate compared to digital periapical radiographs for detecting periapical radiolucencies in endodontically treated teeth. The difference was more pronounced in molar teeth.

Mandibular third molar impaction: review of literature and a proposal of a classification.

OBJECTIVES: The purpose of present article was to review impacted mandibular third molar aetiology, clinical anatomy, radiologic examination, surgical treatment and possible complications, as well as to create new mandibular third molar impaction and extraction difficulty degree classification based on anatomical and radiologic findings and literature review results. MATERIAL AND METHODS: Literature was selected through a search of PubMed, Embase and Cochrane electronic databases. The keywords used for search were mandibular third molar, impacted mandibular third molar, inferior alveolar nerve injury third molar, lingual nerve injury third molar. The search was restricted to English language articles, published from 1976 to April 2013. Additionally, a manual search in the major anatomy and oral surgery journals and books was performed. The publications there selected by including clinical and human anatomy studies. RESULTS: In total 75 literature sources were obtained and reviewed. Impacted mandibular third molar aetiology, clinical anatomy, radiographic examination, surgical extraction of and possible complications, classifications and risk factors were discussed. New mandibular third molar impaction and extraction difficulty degree classification based on anatomical and radiologic findings and literature review results was proposed. CONCLUSIONS: The classification proposed here based on anatomical and radiological impacted mandibular third molar features is promising to be a helpful tool for impacted tooth assessment as well as for planning for surgical operation. Further clinical studies should be conducted for new classification validation and reliability evaluation.

Antibacterial potential of contemporary dental luting cements.

The aims of this investigation were to evaluate the antibacterial activities of different types of dental luting cements and to compare antibacterial action during and after setting. Agar diffusion testing was used to evaluate the antibacterial properties of seven types of dental luting cements (glass ionomer cements (GICs), resin modified GICs, resin composite, zinc oxide eugenol, zinc oxide non-eugenol, zinc phosphate, zinc polycarboxylate cements) on Streptococcus mutans bacteria. Instantly mixed zinc phosphate cements showed the strongest antibacterial activity in contrast to the non-eugenol, eugenol and resin cements that did not show any antibacterial effects. Non-hardened glass ionomer, resin modified and zinc polycarboxylate cements exhibited moderate antibacterial action. Hardened cements showed weaker antibacterial activities, than those ones applied right after mixing.