Pharmaceutically active compounds in aqueous environment: recent developments in their fate, occurrence and elimination for efficient water purification.

The existence of pharmaceutically active compounds (PhACs) in the water is a major concern for environmentalists due to their deleterious effects on living organisms even at minuscule concentrations. This review focuses on PhACs such as analgesics and anti-inflammatory compounds, which are massively excreted in urine and account for the majority of pharmaceutical pollution. Furthermore, other PhACs such as anti-epileptics, beta-blockers and antibiotics are discussed because they also contribute significantly to pharmaceutical pollution in the aquatic environment. This review is divided into two parts. In the first part, different classes of PhACs and their fate in the wastewater environment are presented. In the second part, recent advances in the removal of PhACs by conventional wastewater treatment plants, including membrane bioreactors (MBRs), activated carbon adsorption and bench-scale studies concerning a broad range of advanced oxidation processes (AOPs) that render practical and appropriate strategies for the complete mineralization and degradation of pharmaceutical drugs, are reviewed. This review indicates that drugs like diclofenac, naproxen, paracetamol and aspirin are removed efficiently by conventional systems. Activated carbon adsorption is suitable for the removal of diclofenac and carbamazepine, whereas AOPs are leading water treatment strategies for the effective removal of reviewed PhACs.

Surfactants in water and wastewater (greywater): Environmental toxicity and treatment options.

Surfactant, an emerging pollutant present in greywater, raises the toxicity levels in the water body. Soap, detergent, and personal care items add surfactant to greywater. Due to excessive washing and cleaning procedures brought on by the COVID-19 pandemic, the release of surfactants in greywater has also increased. Considering the environmental toxicity and problems it creates during the treatment, it's essential to remove surfactants from the wastewater. This review intends to explain and address the environmental toxicity of the surfactant released via greywater and current techniques for surfactant removal from wastewater. Various physical, chemical, and biological methods are reported. Modern adsorbents such as hydrophilic silica nanoparticles, chitosan, fly ash, and iron oxide remove surfactants by adsorption. Membrane filtration effectively removes surfactants but is not cost-effective. Coagulants (chemical and natural coagulants) neutralize surfactant charges and help remove them as bigger particles. Electrocoagulation/electroflotation causes surfactants to coagulate and float. Microorganisms break down surfactants in microbial fuel cells to generate power. Surfactants are removed by natural processes and plants in constructed wetlands where traditional aerobic and anaerobic approaches use microbes to break down surfactants. Constructed wetlands, natural coagulation-flocculation, and microbial fuel cells are environmentally beneficial methods to remove surfactants from wastewater.

Phytoremediation of Heavy Metal Contaminated Soil Using Bidens pilosa: Effect of Varying Concentrations of Sophorolipids.

The current study investigates the impact of biosurfactant (sophorolipids, SL) concentrations (0.1 to 1 g kg-1) on the removal of cadmium (29 mg kg-1) from soil using Bidens pilosa. The results showed that increasing concentrations of SL increased the plant biomass. The dry weight of plants was 0.87 g, 0.77 g, 0.65 g, 0.85 g, 0.91 g, 0.92 g, 1.06 g in control, SL0 (No SL), SL1 (0.1 g kg-1), SL2 (0.25 g kg-1), SL3 (0.5 g kg-1), SL4 (0.75 g kg-1), and SL5 (1 g kg-1), respectively. It was observed that root length was higher in SL augmented soil in comparison to treatments without SL. It was also found that, with increasing the SL concentration, total chlorophyll and proline concentrations increased as well. The SL2 treatment had the highest Cd accumulation (76.33 µg pot-1) in the plant. Therefore, SL at 0.25 g kg-1 was considered the most effective concentration for the phytoextraction of Cd from soil. Soil enzyme activities, i.e., alkaline phosphatase, dehydrogenase, and urease activity, increased with the increase in SL concentration. The results of this study concluded that SL promotes the removal of Cd from soil and supports plant growth as well as enzymatic activities in soil.

Biodegradation of Phenol Using the Indigenous Rhodococcus pyridinivorans Strain PDB9T NS-1 Immobilized in Calcium Alginate Beads.

Phenolic compounds are the major contaminants identified from various industrial effluents, which pose an extreme threat to the environment. Therefore, investigating an effective technique to remove these toxic phenolic compounds from the contaminated environment is very essential. In the present investigation, batch tests were performed to assess the biodegradation of phenol using an indigenous Rhodococcus pyridinivorans strain PDB9T NS-1 encapsulated in a calcium alginate bead system. In order to improve the mechanical stability, silica was added to the cell-embedded Ca-alginate beads. The impact of experimental conditions such as contact time, pH, and initial phenol doses was investigated. The biodegradation of phenol was examined over a wide range of phenol, and the results showed that more than 99.6% degradation was achieved at an initial phenol dose of 1000 mg/L in 70 h at 30 °C. Among the various sorption isotherm tested, the Freundlich isotherm was the best fitted to the experimental data. This behavior indicated a multilayer biosorption process and was controlled by heterogeneous surface energy. Based on an intra-particle diffusion model, internal mass transfer or pore diffusion predominated over exterior mass transfer in controlling the entire phenol biosorption process. The biosorption of phenol onto the cell encapsulated in the Ca-alginate bead follows pseudo-first-order kinetics with a superior phenol biosorption capacity of 155 mg/g of Ca-alginate. Further stability study revealed that the bead could be recycled successfully without any substantial decline in phenol degradation efficiency, indicating that the immobilized microbe possesses exceptional operating stability.

Role of Root Exudates on the Soil Microbial Diversity and Biogeochemistry of Heavy Metals.

Due to extensive industrialization and escalation in pollution, the world is facing problems related to soil heavy metal pollution. The traditional ways of soil remediation are neither feasible nor cost-effective in most of the real-world scenarios, where metal concentration is relatively low in soil. Therefore, phytoremediation using plants and plant secretions to remediate heavy metal-contaminated soil is recently getting more attention. The plant root exudates act as an ecological driver in the rhizospheric region where they influence and guide the microbial community to function in such a way that can be advantageous for plant growth. They also promote phytoremediation process by altering the bioavailability of pollutants in soil. Root exudates affect the biogeochemical properties of heavy metals as well. In this review, existing literature on the role of root exudates (natural as well as artificial) on the phytoremediation of heavy metal-contaminated (particularly lead) soil is reviewed. The effect of root exudates on the biogeochemistry of lead in soil is also discussed.

Enhanced adsorptive removal of hexavalent chromium in aqueous media using chitosan-modified biochar: Synthesis, sorption mechanism, and reusability.

Hexavalent chromium (Cr(VI)) is deemed a priority contaminant owing to its carcinogenicity, teratogenicity, and mutagenicity towards flora and fauna. A novel Chitosan-modified Mimosa pigra biochar (CMPBC) was fabricated and the efficiency of Cr(VI) oxyanion removal in aqueous systems was compared with the pristine biochar. The instrumental characterization of X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) confirmed the amino modification of MPBC when treated with chitosan. Characteristic features of the Cr(VI) sorptive process by CMPBC and MPBC were examined by performing batch sorption studies. Experimental data suggested that sorption is heavily dependent on pH and the highest adsorption occurred at pH 3.0. The maximum adsorption capacity of CMPBC was 14.6 ± 1.07 mg g-1. It was further noted that the removal efficiency of CMPBC (92%) was considerably greater than that of MPBC (75%) when the solution pH, biochar dose, and initial concentration of Cr(VI) are 3.0, 1.0 g L-1 and 5.0 mg L-1 respectively. The kinetic data were best interpreted by the power function model (R2 = 0.97) suggesting a homogenous chemisorption process. The isotherm data for the removal of Cr(VI) by CMPBC was inferred well by Redlich Peterson (R2 = 0.96) and Temkin (R2 = 0.96) isotherms. Results of sorption-desorption regeneration cycles indicated that the Cr(VI) uptake by CMPBC is not fully reversible. The coexistence of Cr(VI) and Cr(III) on CMPBC was confirmed through the XPS analysis. The electrostatic attractions between cationic surface functionalities and Cr(VI) oxyanions, the partial reductive transformation of Cr(VI) species to Cr(III), as well as complexation of Cr(III) onto CMPBC were identified as the possible mechanisms of mitigation of Cr(VI) by CMPBC. The results and outcomes of this research suggest the possibility of utilizing the CMPBC as an easily available, environmentally sustainable, and inexpensive sorbent to decontaminate Cr(VI) from aqueous media.

Innovative strategies in algal biomass pretreatment for biohydrogen production.

Biohydrogen is one of the cleanest renewable energies with a high calorific value. Algal biomass can be utilized as a sustainable feedstock for biohydrogen production via dark fermentation. However, the recovery of fermentable sugar from algal biomass is challenging because of the diversity and complex cell wall composition and therefore, requires an additional pretreatment step. However, most of the conventional pretreatment strategies suffer from limited technological feasibility and poor economic viability. In this context, this review aims to present the structural complexities of the cell wall of algae and highlight the innovative approaches such as the use of hybrid technologies, biosurfactants, nanoparticles, and genetic engineering approaches for the hydrolysis of algal biomass and improved biohydrogen production. Additionally, a comprehensive discussion of the comparative evaluation of various pretreatment methods, and the techno-economic and life cycle assessment of algal biohydrogen production is also presented in this review.

Enhanced adsorption of Congo red dye onto polyethyleneimine-impregnated biochar derived from pine needles.

Biochar derived from waste pine needles was chemically modified using polyethyleneimine (PEI) to increase its adsorptive potential for withdrawal of anionic dye Congo red from aqueous solution. PEI impregnation on biochar was confirmed from scanning electron microscopy and energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy, and X-ray diffraction analysis. The surface area of biochar decreased after PEI treatment, but the amine groups increased on biochar surface. PEI-treated biochar displayed considerable increase in adsorption at acidic conditions. Adsorption isotherm was best explained by Langmuir model (R2 > 99) and the adsorption kinetics agrees well with pseudo-second-order model. The maximum adsorption capacity of PEI-treated biochar was observed to be 294.11 mg g-1 and 30.76 mg g-1 for pristine biochar displaying a 9.5-fold increase. The positive value of standard enthalpy of adsorption (∆H° = 14.96 KJmole-1) indicated the endothermic nature of adsorption, and positive value of entropy (∆S° = 74.43 Jmole-1 K-1) revealed the affinity of biochar towards dye molecules. Negative value of Gibb's free energy ∆G° (- 7.2 KJmole-1) revealed that the process was spontaneous. Electrostatic interaction appeared to be the key mechanism governing the adsorption process. Thus, PEI-impregnated biochar represents novel low-cost sorbent that can effectively remove anionic dyes which are poorly removed by pristine biochar.

Bioremoval of toxic malachite green from water through simultaneous decolorization and degradation using laccase immobilized biochar.

In this study, decolorization and degradation of malachite green dye was studied using the laccase immobilized pine needle biochar. Successful immobilization of biochar was achieved by adsorption and confirmed through scanning electron microscopy and energy dispersive X-ray analysis (SEM-EDX), Fourier transform infrared spectroscopy (FTIR). High laccase binding of 64.4 U/g and high immobilization yield of 78.1% was achieved using 4U of enzyme at pH3 and temperature 30 °C. The immobilized laccase retained >50% relative activity in the pH range 2-7, >45% relative activity at 65 °C and >55% relative activity at 4 °C for 4 weeks. The re-usability of immobilized enzyme was checked with 2, 2'-azino-bis 3-ethylbenzothiazoline-6-sulphonic acid (ABTS) substrate and enzyme retained 53% of its activity after 6 cycles. Immobilized laccase was used for the degradation and decolorization of azo dye malachite green in aqueous solution. More than 85% removal of malachite green dye (50 mg/L) was observed within 5 h. FTIR and high performance liquid chromatography (HPLC) analysis clearly indicated the breakdown of dye and presence of metabolites (leuco malachite green, methanone, [4-(dimethyl amino)pheny]phenyl and 3-dimethyl-phenyl amine) in gas chromatography-mass spectrometry (GC-MS) analysis confirmed the dye degradation. Phytotoxicity analysis indicated that the enzymatic degradation resulted in lesser toxic metabolites than the original dye. Thus, laccase immobilized biochar can be used as an efficient biocatalytic agent to remove dye from water.

Co-metabolic biodegradation of 4-bromophenol in a mixture of pollutants system by Arthrobacter chlorophenolicus A6.

Brominated phenols are listed as priority pollutants together with nitrophenol and chlorophenol are the key components of paper pulp wastewater. However, the biodegradation of bromophenol in a mixed substrate system is very scanty. In the present investigation, simultaneous biodegradation kinetics of three substituted phenols 4-bromophenol (4-BP), 4-nitrophenol (4-NP), and 4-chlorophenol (4-CP) were investigated using Arthrobacter chlorophenolicus A6. A 23 full factorial design was applied with varying 4-BP and 4-CP from 75-125 mg/L and 4-NP from 50-100 mg/L. Almost complete degradation of this mixture of substituted phenols was achieved at initial concentration combinations of 125, 125, and 100 mg/L of 4-CP, 4-BP, and 4-NP, respectively, in 68 h. Statistical analysis of the results revealed that, among the three variables, 4-NP had the most prominent influence on the degradation of both 4-CP and 4-BP, while the concentration of 4-CP had a strong negative interaction effect on the biodegradation of 4-NP. Irrespective of the concentration levels of these three substrates, 4-NP was preferentially biodegraded over 4-CP and 4-BP. Furthermore, 4-BP biodegradation rates were found to be higher than those of 4-CP, followed by 4-NP. Besides, the variation of the biomass yield coefficient of the culture was investigated at different initial concentration combinations of these substituted phenols. Although the actinomycetes consumed 4-NP at a faster rate, the biomass yield was very poor. This revealed that the microbial cells were more stressed when grown on 4-NP compared to 4-BP and 4-CP. Overall, this study revealed the potential of A. chlorophenolicus A6 for the degradation of 4-BP in mixed substrate systems.

Liquid wastes as a renewable feedstock for yeast biodiesel production: Opportunities and challenges.

Microbial lipids (bacterial, yeast, or algal) production and its utilization as a feedstock for biodiesel production in a sustainable and economical way along with waste degradation is a promising technology. Oleaginous yeasts have demonstrated multiple advantages over algae and bacteria such as high lipid yields, lipid similarity to vegetable oil, and requirement of lesser area for cultivation. Oleaginous yeasts grown on lignocellulosic solid waste as renewable feedstocks have been widely reported and reviewed. Recently, industrial effluents and other liquid wastes have been evaluated as feedstocks for biodiesel production from oleaginous yeasts. The idea of the utilization of wastewater for the growth of oleaginous yeasts for simultaneous wastewater treatment and lipid production is gaining attention among researchers. However, the detailed knowledge on the economic aspects of different process involved during the conversion of oleaginous yeast into lipids hinders its large-scale application. Therefore, this review aims to provide an overview of yeast-derived biodiesel production by utilizing industrial effluents and other liquid wastes as feedstocks. Various technologies for biomass harvesting, lipid extraction and the economic aspects specifically focused on yeast biodiesel production were also analyzed and reported in this review. The utilization of liquid wastes and the incorporation of cost-efficient harvesting and lipid extraction strategy would facilitate large-scale commercialization of biodiesel production from oleaginous yeasts in near future.

Sophorolipid: a glycolipid biosurfactant as a potential therapeutic agent against COVID-19.

Biosurfactants are natural surfactants produced by a variety of microorganisms. In recent years, biosurfactants have garnered a lot of interest due to their biomedical and pharmaceutical applications. Sophorolipids are glycolipid types of biosurfactants produced by selected nonpathogenic yeasts. In addition to the detergent activity (reduction in surface and interfacial tension), which is commonly utilized by biomedical applications, sophorolipids have shown some unique properties such as, antiviral activity against enveloped viruses, immunomodulation, and anticancer activity. Considering their antiviral activity, the potential of sophorolipids as an antiviral therapy for the treatment of COVID-19 is discussed in this review. Being a surfactant molecule, sophorolipid could solubilize the lipid envelope of SARS-CoV-2 and inactivate it. As an immunomodulator, sophorolipid could attenuate the cytokine storm caused by the SARS-CoV-2 upon infection, and inhibit the progression of COVID-19 in patients. Sophorolipids could also be used as an effective treatment strategy for COVID-19 patients suffering from cancer. However, there is limited research on the use of sophorolipid as a therapeutic agent for the treatment of cancer and viral diseases, and to modulate the immune response. Nevertheless, the multitasking capabilities of sophorolipids make them potential therapeutic candidates for the bench-to-bedside research for the treatment of COVID-19.

Phytoremediation of cadmium-contaminated soil by Bidens pilosa L.: impact of pine needle biochar amendment.

The objective of the present study was to evaluate the feasibility of pine needle biochar as a soil amendment to promote the growth of Bidens pilosa L. and enhance its ability to phytoextract the cadmium from soil. Pot experiments (50 d) were designed as control experiment (C); metal treatment (MT), 20 mg Cd kg-1; biochar treatment (BT100 or BT200), 100 or 200 mg kg-1; and metal-biochar treatment (MBT100 or MBT200), 20 mg Cd kg-1 and 100 or 200 mg biochar kg-1. The Cd (20 mg kg-1) or biochar treatment (100 mg kg-1) increased the dry weight and root length of B. pilosa. The biochar amendment enhanced the metal concentration in root and shoot of the plant. The plant could accumulate 39.47±5.44 mg Cd kg-1 in shoots (MT), which increased to 45.96±17.3 mg Cd kg-1 and 55.01±5.65 mg Cd kg-1 under biochar treatment sets MBT100 and MBT200, respectively. The Cd uptake by B. pilosa in MT, MBT100, and MBT200 treatments were 67.81 µg/plant, 78.58 µg/plant, and 76.13 µg/plant, respectively. The biochar amendments increased the proline concentrations while decreased the chlorophyll content in leaves indicating the stress on the plant. Overall, the result indicates that soil amended with pine needle biochar at 100 mg kg-1 increased the phytoremediation ability of B. pilosa.

COVID-19: Eco-friendly hand hygiene for human and environmental safety.

The Coronavirus disease-2019 (COVID-19) outbreak is caused by a highly pathogenic novel coronavirus (SARS-CoV-2). To date, there is no prescribed medicine for COVID-19. Frequent handwashing with soap and the use of alcohol-based hand sanitizers is recommended by WHO for hand hygiene and to prevent the spread of COVID-19. However, there are safety concerns associated with the use of soaps and alcohol-based hand sanitizers. Therefore, the review aims to highlight the health and environmental concerns associated with the frequent use of soaps/detergents and alcohol-based hand sanitizers amid COVID-19. The potential of some of the natural detergents and sanitizing agents as eco-friendly alternatives to petrochemical-based soaps and alcohol-based hand rubs for hand hygiene are discussed. The market of soaps and hand sanitizers is expected to grow in the coming years and therefore, future research should be directed to develop eco-friendly soaps and hand sanitizers for human and environmental safety.

SARS-CoV-2 in wastewater: Challenges for developing countries.

The COVID-19 pandemic that has engulfed the world, has affected the human lives in several aspects. The detection of SARS-CoV-2 in faeces and urine of the infected person, even after viral clearance in the respiratory tract, and its presence in untreated wastewater raises the possibility of fecal-oral transmission in future. The situation is likely to be more aggravated in developing and least developed countries struggling with the problem of ineffective waste disposal system, open defecation, poor sanitation, and limited access to clean drinking water. In this review, the available data on wastewater treatment, sanitation status and healthcare infrastructure from middle- and low-income countries is collected and correlated with the risk associated with the fecal-oral transmission of SARS-CoV-2. The review also highlights the limitation of COVID-19 surveillance through sewage monitoring in these countries owing to the absence of proper sewerage system. An inclusive approach of awareness, prevention, and mitigation from global to the local levels is required to overcome this challenging situation in developing countries.

High lipid accumulating bacteria isolated from dairy effluent scum grown on dairy wastewater as potential biodiesel feedstock.

The study evaluated the lipid accumulation potential of bacteria isolated from dairy effluent scum by the valorization of dairy wastewater as a renewable feedstock for biodiesel production. Three oleaginous bacteria (i.e. DS-1, DS-6, and DS-7) were screened on the basis of their lipid accumulation (>20% lipid content) and productivity on a glucose-based medium. The effect of different carbon sources (i.e. lactose, sucrose, starch, glucose, and xylose) on lipid accumulation capacity of the bacterial isolates was evaluated. The rod-shaped oleaginous bacterium DS-7 could accumulate 90% lipid with 1.2 g/l·d lipid productivity using lactose as a sole source of carbon. The bacteria could efficiently utilize dairy wastewater (~50% reduction in BOD) with reasonably high lipid accumulation (72.78%), biomass production (4.29 g/l) and lipid productivity (0.727 g/l·d). The lipids accumulated by bacterium DS-7 were mostly neutral lipids and contained fatty acids of chain length C14:0-C18:0, as confirmed by nile red staining and nuclear magnetic resonance (NMR) spectroscopy. Fourier-transform infrared (FTIR) spectroscopy and gas chromatography (GC) analysis of fatty acid methyl esters (FAME) revealed that transesterified bacterial lipids from the isolated bacteria DS-7 are suitable for biodiesel applications.

Wastewater treatment by slow sand filters using uncoated and iron-coated fine sand: impact of hydraulic loading rate and media depth.

Two lab-scale slow sand filters (SSFs), packed with uncoated fine sand (SSFu) and iron-coated fine sand (SSFco), were operated to study their efficiency in treating municipal wastewater. The effects of sand coating; hydraulic loading rates (HLRs) (0.56, 0.85, and 1.12 cm/h); and filter depths (22, 32, and 42 cm) were evaluated. Sand coating did not have any significant effect on wastewater treatment by the SSF at all depths (p > 0.05). The removals of total suspended solids (TSS), chemical oxygen demand (COD), and phosphate decreased with increase in HLR. On the other hand, media depth had positive effects on the removal of turbidity, TSS, COD, and total coliforms (TC). At HLR of 0.56 cm/h, the average removals of each studied parameter, i.e., turbidity, TSS, and COD, at filter depth d42 in SSFu and SSFco were 94.3, 90.1, and 56% and 92.7, 93, and 30.95%, respectively. Both filters efficiently removed the total coliforms (> 90%) and fecal coliform (up to 99%) but inefficient in nitrate removal. Frequent clogging was observed in SSFu due to the colonization of microorganisms on the sand surface, which was confirmed by SEM images. Biofilm formation or microbial colonization was absent in SSFco, which might be responsible for uninterrupted operation of SSFco. Overall, the sand coating is beneficial for long-term operation of SSF.

Microbial biosurfactants for oil spill remediation: pitfalls and potentials.

Spillage of fossil-based oils during their conveyance through water conduits are sporadic, but significant environmental disasters. As the viscous hydrocarbons of the crude oils spread on water surface and choke aquatic life to death, their effective degradation is crucial for ecological balance. Though chemical and mechanical means are conventional ways to tackle the issues, they are riddled with limitations. In this scenario, coercing the biosurfactant-producing bacteria and fungi are promising avenues. Biosurfactants, the amphiphilic compounds, are capable of reducing interfacial tension, dispersing the oil particles, and degrading them into non-toxic debris. Among the vast array of biosurfactants, the trio of rhamnolipid, sophorolipid, and surfactin have been characterized well. Among the microbes, only Pseudomonas, Bacillus, and Candida have been evaluated, while there can be other exploitable candidates. In this regard, this review discusses the scopes and hurdles in utilization of the microbial surface-active compounds for oil spill management.