Understanding intra-neighborhood patterns in PM2.5 and PM10 using mobile monitoring in Braddock, PA.

BACKGROUND: Braddock, Pennsylvania is home to the Edgar Thomson Steel Works (ETSW), one of the few remaining active steel mills in the Pittsburgh region. An economically distressed area, Braddock exceeds average annual (>15 µg/m3) and daily (>35 µg/m3) National Ambient Air Quality Standards (NAAQS) for particulate matter (PM2.5). METHODS: A mobile air monitoring study was designed and implemented in morning and afternoon hours in the summer and winter (2010-2011) to explore the within-neighborhood spatial and temporal (within-day and between-day) variability in PM2.5 and PM10. RESULTS: Both pollutants displayed spatial variation between stops, and substantial temporal variation within and across study days. For summer morning sampling runs, site-specific mean PM2.5 ranged from 30.0 (SD = 3.3) to 55.1 (SD = 13.0) µg/m3. Mean PM10 ranged from 30.4 (SD = 2.5) to 69.7 (SD = 51.2) µg/m3, respectively. During summer months, afternoon concentrations were significantly lower than morning for both PM2.5 and PM10, potentially owing to morning subsidence inversions. Winter concentrations were lower than summer, on average, and showed lesser diurnal variation. Temperature, wind speed, and wind direction predicted significant variability in PM2.5 and PM10 in multiple linear regression models. CONCLUSIONS: Data reveals significant morning versus afternoon variability and spatial variability in both PM2.5 and PM10 concentrations within Braddock. Information obtained on peak concentration periods, and the combined effects of industry, traffic, and elevation in this region informed the design of a larger stationary monitoring network.

Public perceptions of energy consumption and savings.

In a national online survey, 505 participants reported their perceptions of energy consumption and savings for a variety of household, transportation, and recycling activities. When asked for the most effective strategy they could implement to conserve energy, most participants mentioned curtailment (e.g., turning off lights, driving less) rather than efficiency improvements (e.g., installing more efficient light bulbs and appliances), in contrast to experts' recommendations. For a sample of 15 activities, participants underestimated energy use and savings by a factor of 2.8 on average, with small overestimates for low-energy activities and large underestimates for high-energy activities. Additional estimation and ranking tasks also yielded relatively flat functions for perceived energy use and savings. Across several tasks, participants with higher numeracy scores and stronger proenvironmental attitudes had more accurate perceptions. The serious deficiencies highlighted by these results suggest that well-designed efforts to improve the public's understanding of energy use and savings could pay large dividends.

Identifying likely PM2.5 sources on days of elevated concentration: a simple statistical approach.

A simple statistical method is described for identifying the likely importance of local sources of PM2.5 in a region on days when the National Ambient Air Quality Standard is exceeded. The method requires only PM2.5 mass concentration and wind direction data, and makes use of the EPA database on PM2.5 emissions in the local region of interest. The method has been illustrated using data from the Pittsburgh Air Quality Study, and suggests that local sources can be very important in affecting PM2.5 exceedances. The results have implications for many of the urban areas in the eastern United States downwind of large sources in the Midwest, and shows that simple statistical tests can be of value in identifying regions where further testing with sophisticated air quality dispersion models and source-receptor models is warranted.

Apportionment of ambient primary and secondary fine particulate matter at the Pittsburgh National Energy Laboratory particulate matter characterization site using positive matrix factorization and a potential source contributions function analysis.

Fine particulate matter (PM2.5) concentrations associated with 202 24-hr samples collected at the National Energy Technology Laboratory (NETL) particulate matter (PM) characterization site in south Pittsburgh from October 1999 through September 2001 were used to apportion PM2.5 into primary and secondary contributions using Positive Matrix Factorization (PMF2). Input included the concentrations of PM2.5 mass determined with a Federal Reference Method (FRM) sampler, semi-volatile PM2.5 organic material, elemental carbon (EC), and trace element components of PM2.5. A total of 11 factors were identified. The results of potential source contributions function (PSCF) analysis using PMF2 factors and HYSPLIT-calculated back-trajectories were used to identify those factors associated with specific meteorological transport conditions. The 11 factors were identified as being associated with emissions from various specific regions and facilities including crustal material, gasoline combustion, diesel combustion, and three nearby sources high in trace metals. Three sources associated with transport from coal-fired power plants to the southeast, a combination of point sources to the northwest, and a steel mill and associated sources to the west were identified. In addition, two secondary-material-dominated sources were identified, one was associated with secondary products of local emissions and one was dominated by secondary ammonium sulfate transported to the NETL site from the west and southwest. Of these 11 factors, the four largest contributors to PM2.5 were the secondary transported material (dominated by ammonium sulfate) (47%), local secondary material (19%), diesel combustion emissions (10%), and gasoline combustion emissions (8%). The other seven factors accounted for the remaining 16% of the PM2.5 mass. The findings are consistent with the major source of PM2.5 in the Pittsburgh area being dominated by ammonium sulfate from distant transport and so decoupled from local activity emitting organic pollutants in the metropolitan area. In contrast, the major local secondary sources are dominated by organic material.

Apportionment of ambient primary and secondary fine particulate matter during a 2001 summer intensive study at the CMU Supersite and NETL Pittsburgh site.

Gaseous and particulate pollutant concentrations associated with five samples per day collected during a July 2001 summer intensive study at the Pittsburgh Carnegie Mellon University (CMU) Supersite were used to apportion fine particulate matter (PM2.5) into primary and secondary contributions using PMF2. Input to the PMF2 analysis included the concentrations of PM2.5 nonvolatile and semivolatile organic material, elemental carbon (EC), ammonium sulfate, trace element components, gas-phase organic material, and NO(x), NO2, and O3 concentrations. A total of 10 factors were identified. These factors are associated with emissions from various sources and facilities including crustal material, gasoline combustion, diesel combustion, and three nearby sources high in trace metals. In addition, four secondary sources were identified, three of which were associated with secondary products of local emissions and were dominated by organic material and one of which was dominated by secondary ammonium sulfate transported to the CMU site from the west and southwest. The three largest contributors to PM2.5 were secondary transported material (dominated by ammonium sulfate) from the west and southwest (49%), secondary material formed during midday photochemical processes (24%), and gasoline combustion emissions (11%). The other seven sources accounted for the remaining 16% of the PM2.5. Results obtained at the CMU site were comparable to results previously reported at the National Energy Technology Laboratory (NETL), located approximately 18 km south of downtown Pittsburgh. The major contributor at both sites was material transported from the west and southwest. Some difference in nearby sources could be attributed to meteorology as evaluated by HYSPLIT model back-trajectory calculations. These findings are consistent with the majority of the secondary ammonium sulfate in the Pittsburgh area being the result of contributions from distant transport, and thus decoupled from local activity involving organic pollutants in the metropolitan area. In contrast, the major local secondary sources were dominated by organic material.

Apportionment of ambient primary and secondary pollutants during a 2001 summer study in Pittsburgh using U.S. Environmental Protection Agency UNMIX.

Apportionment of primary and secondary pollutants during the summer 2001 Pittsburgh Air Quality Study (PAQS) is reported. Several sites were included in PAQS, with the main site (the supersite) adjacent to the Carnegie Mellon University campus in Schenley Park. One of the additional sampling sites was located at the National Energy Technology Laboratory, located approximately 18 km southeast of downtown Pittsburgh. Fine particulate matter (PM2.5) mass, gas-phase volatile organic material (VOM), particulate semivolatile and nonvolatile organic material (NVOM), and ammonium sulfate were apportioned at the two sites into their primary and secondary contributions using the U.S. Environmental Protection Agency UNMIX 2.3 multivariate receptor modeling and analysis software. A portion of each of these species was identified as originating from gasoline and diesel primary mobile sources. Some of the organic material was formed from local secondary transformation processes, whereas the great majority of the secondary sulfate was associated with regional transformation contributions. The results indicated that the diurnal patterns of secondary gas-phase VOM and particulate semivolatile and NVOM were not correlated with secondary ammonium sulfate contributions but were associated with separate formation pathways. These findings are consistent with the bulk of the secondary ammonium sulfate in the Pittsburgh area being the result of contributions from distant transport and, thus, decoupled from local activity involving organic pollutants in the metropolitan area.

Stationary sources of airborne lead: a comparison of emissions data for southern California.

Estimates for the air releases of lead from stationary point sources are considered for the South Coast Air Basin of California. We have examined four databases published by U.S. Environmental Protection Agency, the California Air Resources Board, and the South Coast Air Quality Management District. Our analysis indicates that none of the databases includes every emitting facility in the South Coast Air Basin of California and that other discrepancies among the databases exist. Additionally, the data have been analyzed for temporal variation, and some of the California Air Resources Board data are not current. The South Coast Air Quality Management District inventory covers 12 times more facilities in 2001 than in 1996. From this analysis, we conclude that all four of the databases would benefit by sharing data, increasing transparency, analyzing uncertainty, and standardizing emission estimation methods.

Improving performance of HVAC systems to reduce exposure to aerosolized infectious agents in buildings; recommendations to reduce risks posed by biological attacks.

The prospect of biological attacks is a growing strategic threat. Covert aerosol attacks inside a building are of particular concern. In the summer of 2005, the Center for Biosecurity of the University of Pittsburgh Medical Center convened a Working Group to determine what steps could be taken to reduce the risk of exposure of building occupants after an aerosol release of a biological weapon. The Working Group was composed of subject matter experts in air filtration, building ventilation and pressurization, air conditioning and air distribution, biosecurity, building design and operation, building decontamination and restoration, economics, medicine, public health, and public policy. The group focused on functions of the heating, ventilation, and air conditioning systems in commercial or public buildings that could reduce the risk of exposure to deleterious aerosols following biological attacks. The Working Group's recommendations for building owners are based on the use of currently available, off-the-shelf technologies. These recommendations are modest in expense and could be implemented immediately. It is also the Working Group's judgment that the commitment and stewardship of a lead government agency is essential to secure the necessary financial and human resources and to plan and build a comprehensive, effective program to reduce exposure to aerosolized infectious agents in buildings.

The role of resuspended soil in lead flows in the California South Coast Air Basin.

The inputs and outputs of airborne lead in the South Coast Air Basin of California (SOCAB) are quantified according to standard mass balance calculations. Results for 2001 show that approximately 49,000 kg of lead exitthe Basin each year, but traditional sources contribute only about 6500 kg of lead each year. We resolve this discrepancy through a simple computer model that quantifies the resuspension of lead-containing particles. Our results suggest that these lead particles were deposited during the years of leaded gasoline use and that resuspension is responsible for generating an additional 54,000 kg of airborne lead each year. This agrees roughly with estimated outputs. Thus, we conclude that resuspension, although an insignificant source of airborne lead during the era of leaded fuel, became a principal source in the SOCAB as lead emissions from vehicles declined. The results of the resuspension model further suggest that soil lead levels will remain elevated for many decades, in which case resuspension will remain a major source well into the future.

Airborne reduced nitrogen: ammonia emissions from agriculture and other sources.

Ammonia is a basic gas and one of the most abundant nitrogen-containing compounds in the atmosphere. When emitted, ammonia reacts with oxides of nitrogen and sulfur to form particles, typically in the fine particle size range. Roughly half of the PM(2.5) mass in eastern United States is ammonium sulfate, according to the US EPA. Results from recent studies of PM(2.5) show that these fine particles are typically deposited deep in the lungs and may lead to increased morbidity and/or mortality. Also, these particles are in the size range that will degrade visibility. Ammonia emission inventories are usually constructed by multiplying an activity level by an experimentally determined emission factor for each source category. Typical sources of ammonia include livestock, fertilizer, soils, forest fires and slash burning, industry, vehicles, the oceans, humans, pets, wild animals, and waste disposal and recycling activities. Livestock is the largest source category in the United States, with waste from livestock responsible for about 3x10(9) kg of ammonia in 1995. Volatilization of ammonia from livestock waste is dependent on many parameters, and thus emission factors are difficult to predict. Despite a seasonal variation in these values, the emission factors for general livestock categories are usually annually averaged in current inventories. Activity levels for livestock are from the USDA Census of Agriculture, which does not give information about animal raising practices such as housing types and grazing times, waste handling systems, and approximate animal slurry spreading times or methods. Ammonia emissions in the United States in 1995 from sources other than livestock are much lower; for example, annual emissions are roughly 8x10(8) kg from fertilizer, 7x10(7) kg from industry, 5x10(7) kg from vehicles and 1x10(8) kg from humans. There is considerable uncertainty in the emissions from soil and vegetation, although this category may also be significant. Recommendations for future directions in ammonia research include designing experiments to improve emission factors and their resolution in all significant source categories, developing mass balance models, and refining of the livestock activity level data by eliciting judgment from experts in this field.