Smoke on the Water: Comparative Assessment of Combined Thermal Shock Treatments for Control of Invasive Asian Clam, Corbicula fluminea.

Suppression of established populations of invasive alien species can be a complex and expensive process, which is frequently unsuccessful. The Asian clam, Corbicula fluminea (Müller, 1774), is considered a high impact invader that can adversely alter freshwater ecosystems and decrease their socioeconomic value. To date, C. fluminea continues to spread and persist within freshwater environments worldwide, despite repeated management attempts to prevent dispersal and suppress established populations. As extensive C. fluminea beds can often become exposed during low-water conditions, the direct application of hot or cold thermal shock treatments has been proposed as suitable mechanism for their control. Further, mechanical substrate disturbance may enhance the efficacy of thermal shock treatments by facilitating exposures to multiple layers of buried clams. In the present study, we advanced these methods by assessing combined applications of both hot and cold thermal shock treatments for control of C. fluminea, using steam spray (≥100 °C; 350 kPa), low- or high-intensity open-flame burns (~1000 °C) and dry ice (-78 °C). In a direct comparison of raking combined with hot thermal shock applications, both steam and high-intensity open-flame treatments tended to be most effective, especially following multiple applications. In addition, when hot thermal treatments are followed by a final cold shock (i.e. dry ice), steam treatments tended to be most effective. Further, when dry ice was applied either alone or prior to an application of a hot shock treatment, substantial if not complete C. fluminea mortality was observed. Overall, this study demonstrated that combined applications of hot and cold thermal shock treatments, applied following the disruption of the substrate, can substantially increase C. fluminea mortality compared to separate hot or cold treatments.

Using structured eradication feasibility assessment to prioritize the management of new and emerging invasive alien species in Europe.

Prioritizing the management of invasive alien species (IAS) is of global importance and within Europe integral to the EU IAS regulation. To prioritize management effectively, the risks posed by IAS need to be assessed, but so too does the feasibility of their management. While the risk of IAS to the EU has been assessed, the feasibility of management has not. We assessed the feasibility of eradicating 60 new (not yet established) and 35 emerging (established with limited distribution) species that pose a threat to the EU, as identified by horizon scanning. The assessment was carried out by 34 experts in invasion management from across Europe, applying the Non-Native Risk Management scheme to defined invasion scenarios and eradication strategies for each species, assessing the feasibility of eradication using seven key risk management criteria. Management priorities were identified by combining scores for risk (derived from horizon scanning) and feasibility of eradication. The results show eradication feasibility score and risk score were not correlated, indicating that risk management criteria evaluate different information than risk assessment. In all, 17 new species were identified as particularly high priorities for eradication should they establish in the future, whereas 14 emerging species were identified as priorities for eradication now. A number of species considered highest priority for eradication were terrestrial vertebrates, a group that has been the focus of a number of eradication attempts in Europe. However, eradication priorities also included a diverse range of other taxa (plants, invertebrates and fish) suggesting there is scope to broaden the taxonomic range of attempted eradication in Europe. We demonstrate that broad scale structured assessments of management feasibility can help prioritize IAS for management. Such frameworks are needed to support evidence-based decision-making.

Steam and Flame Applications as Novel Methods of Population Control for Invasive Asian Clam (Corbicula fluminea) and Zebra Mussel (Dreissena polymorpha).

Control strategies for established populations of invasive alien species can be costly and complex endeavours, which are frequently unsuccessful. Therefore, rapid-reaction techniques that are capable of maximising efficacy whilst minimising environmental damage are urgently required. The Asian clam (Corbicula fluminea Müller, 1774), and the zebra mussel (Dreissena polymorpha Pallas, 1771), are invaders capable of adversely affecting the functioning and biodiversity of freshwater ecosystems. Despite efforts to implement substantial population-control measures, both species continue to spread and persist within freshwater environments. As bivalve beds often become exposed during low-water conditions, this study examined the efficacy of steam-spray (≥100 °C, 350 kPa) and open-flame burn treatments (~1000 °C) to kill exposed individuals. Direct steam exposure lasting for 5 min caused 100% mortality of C. fluminea buried at a depth of 3 cm. Further, combined rake and thermal shock treatments, whereby the substrate is disturbed between each application of either a steam or open flame, caused 100% mortality of C. fluminea specimens residing within a 4-cm deep substrate patch, following three consecutive treatment applications. However, deeper 8-cm patches and water-saturated substrate reduced maximum bivalve species mortality rates to 77% and 70%, respectively. Finally, 100% of D. polymorpha specimens were killed following exposure to steam and open-flame treatments lasting for 30 s and 5 s, respectively. Overall, our results confirm the efficacy of thermal shock treatments as a potential tool for substantial control of low-water-exposed bivalves. Although promising, our results require validation through upscaling to field application, with consideration of other substrate types, increased substrate depth, greater bivalve densities, non-target and long-term treatment effects.

Using open-source software and digital imagery to efficiently and objectively quantify cover density of an invasive alien plant species.

The most commonly used method for measuring vegetation cover is visual estimation, which is highly subjective, potentially leading to measurement errors. This poses serious implications to the assessment and continued management of plant species cover, for example in the control of invasive plant species. Morphological analysis of digital imagery has, to date, been primarily applied in the classification of landscape features. Our novel application of morphological image analysis provides an objective method for detection and accurate cover assessment of an invasive alien plant species (IAS), giving reduced measurement errors when compared to visual estimation. Importantly, this method is entirely based on free software. Guidos Toolbox is a collection of generic raster image processing routines, including Morphological Spatial Pattern Analysis (MSPA), which classifies and quantifies features according to shape. MSPA was employed in this study to detect and quantify cover of invasive Petasites pyrenaicus (Winter heliotrope) in digital images of 1 m × 1 m plots. Its efficacy was compared to that of two other methods- GIS Digitisation (used as an accurate baseline) and Visual Estimation (standard method). We tested the limit of MSPA usability on images of varying complexity, i.e. "simple", intermediate" or "complex", depending on presence/absence of other vascular plant species and the species richness of plot. Our results show good agreement between all three methods. MSPA measurement of P. pyrenaicus cover was most closely aligned with the GIS Digitisation (concordance correlation coefficients of 0.966). Visual Estimation was less closely aligned with GIS Digitisation (concordance correlation coefficients of 0.888). However, image complexity resulted in differing levels of agreement; with the closest agreement being achieved between MSPA and GIS Digitisation when used on images of lower and higher complexity. MSPA consistently provides higher accuracy and precision for P. pyrenaicus cover measurement than the standard Visual Estimation method. Our methodology is applicable to a range of focal vegetation species, both herbaceous and graminoid. Future application of MSPA for larger-scale surveying and monitoring via remote sensing is discussed, potentially reducing resource demands and increasing cover measurement consistency and accuracy. We recommend this method forms part of vegetation management toolkits for not only environmental managers, but for anyone concerned with plant cover assessment, from agricultural systems to sustainable resource use.

The effectiveness of disinfectant and steam exposure treatments to prevent the spread of the highly invasive killer shrimp, Dikerogammarus villosus.

Biosecurity protocols designed to prevent the spread of invasive alien species (IAS) are now an essential aspect of IAS management. However, the effectiveness of various biosecurity treatments requires further exploration. Killer shrimp, Dikerogammarus villosus, a notoriously high impact and ecosystem destabilising invader, has rapidly spread across Europe, and is of concern to invade Northern America. In this study, we examine the effectiveness of three commonly used, broad-spectrum disinfectants to cause mortality of D. villosus: Virasure Aquatic, Virkon Aquatic, and Virkon S. Immersion and spray treatments of 1%, 2% and 4% disinfectant solutions were examined for applications of up to 300 secs immersion and for up to ten consecutive sprays. Furthermore, we assessed the effectiveness of steam (≥100 °C) treatments for up to 120 secs. For all disinfectants, immersion in 1% solutions caused 100% mortality at ≥120 secs. At higher concentrations, shorter immersion times caused complete mortality: 60 and 15 secs for 2% and 4% solutions, respectively. Five sprays of 2% and 4% solutions resulted in 100% mortality, for all disinfectants. Direct steam exposure was highly effective, with complete D. villosus mortality occurring at ≥10 secs. Overall, brief exposure to broad-spectrum disinfectants and direct steam could be used to limit D. villosus spread.