Printing bone in a gel: using nanocomposite bioink to print functionalised bone scaffolds.

Free-form printing offers a novel biofabrication approach to generate complex shapes by depositing hydrogel materials within a temporary supportive environment. However, printed hydrogels typically lack the requisite mechanical properties and functionality of the desired tissue, limiting application and, more importantly, safety and efficacy of the implant. The study authors have developed an innovative nanoclay-based bioink to print high shape fidelity functional constructs for potential skeletal application. Laponite® (LAP) nanoclay was combined with gellan gum (GG) to generate a printable hydrogel that was highly stable in vitro, displayed limited swelling ability compared with the silicate-free control and remained stable over time. An agarose fluid gel was found to provide the requisite support for the deposition of the material ink and preservation of the printed structure before crosslinking. Printed C2C12 myoblasts remained viable and displayed extensive proliferation over 21 days in culture. Cell-laden scaffolds demonstrated functionality within 1 day of culture in vitro and that was preserved over 3 weeks. Analysis of absorption and release mechanisms from LAP-GG using model proteins (lysozyme and bovine serum albumin) demonstrated the retention capability of the clay-based materials for compound localisation and absence of burst release. Vascular endothelial growth factor â€‹was loaded within the agarose fluid gel and absorbed by the material ink via absorption during deposition. The 3D-printed constructs were implanted on the chorioallantoic membrane of a 10-day-old developing chick. Extensive and preferential vasculature infiltration was observed in LAP-GG-loaded vascular endothelial growth factor constructs compared with controls (p<0.01 and p<0.0001) after only 7 days of incubation. The current studies demonstrate, for the first time, the application of innovative LAP-GG 3D constructs in the generation of growth factor-loaded 3D constructs for potential application in skeletal tissue repair.

The cell in the ink: Improving biofabrication by printing stem cells for skeletal regenerative medicine.

Recent advances in regenerative medicine have confirmed the potential to manufacture viable and effective tissue engineering 3D constructs comprising living cells for tissue repair and augmentation. Cell printing has shown promising potential in cell patterning in a number of studies enabling stem cells to be precisely deposited as a blueprint for tissue regeneration guidance. Such manufacturing techniques, however, face a number of challenges including; (i) post-printing cell damage, (ii) proliferation impairment and, (iii) poor or excessive final cell density deposition. The use of hydrogels offers one approach to address these issues given the ability to tune these biomaterials and subsequent application as vectors capable of delivering cell populations and as extrusion pastes. While stem cell-laden hydrogel 3D constructs have been widely established in vitro, clinical relevance, evidenced by in vivo long-term efficacy and clinical application, remains to be demonstrated. This review explores the central features of cell printing, cell-hydrogel properties and cell-biomaterial interactions together with the current advances and challenges in stem cell printing. A key focus is the translational hurdles to clinical application and how in vivo research can reshape and inform cell printing applications for an ageing population.

Development of a clay based bioink for 3D cell printing for skeletal application.

Three-dimensional printing of cell-laden hydrogels has evolved as a promising approach on the route to patient-specific or complex tissue-engineered constructs. However, it is still challenging to print structures with both, high shape fidelity and cell vitality. Herein, we used a synthetic nanosilicate clay, called Laponite, to build up scaffolds utilising the extrusion-based method 3D plotting. By blending with alginate and methylcellulose, a bioink was developed which allowed easy extrusion, achieving scaffolds with high printing fidelity. Following extrusion, approximately 70%-75% of printed immortalised human mesenchymal stem cells survived and cell viability was maintained over 21 days within the plotted constructs. Mechanical properties of scaffolds comprised of the composite bioink decreased over time when stored under cell culture conditions. Nevertheless, shape of the plotted constructs was preserved even over longer cultivation periods. Laponite is known for its favourable drug delivery properties. Two model proteins, bovine serum albumin and vascular endothelial growth factor were loaded into the bioink. We demonstrate that the release of both growth factors significantly changed to a more sustained profile by inclusion of Laponite in comparison to an alginate-methylcellulose blend in the absence of Laponite. In summary, addition of a synthetic clay, Laponite, improved printability, increased shape fidelity and was beneficial for controlled release of biologically active agents such as growth factors.

A surprisingly poor correlation between in vitro and in vivo testing of biomaterials for bone regeneration: results of a multicentre analysis.

New regenerative materials and approaches need to be assessed through reliable and comparable methods for rapid translation to the clinic. There is a considerable need for proven in vitro assays that are able to reduce the burden on animal testing, by allowing assessment of biomaterial utility predictive of the results currently obtained through in vivo studies. The purpose of this multicentre review was to investigate the correlation between existing in vitro results with in vivo outcomes observed for a range of biomaterials. Members from the European consortium BioDesign, comprising 8 universities in a European multicentre study, provided data from 36 in vivo studies and 47 in vitro assays testing 93 different biomaterials. The outcomes of the in vitro and in vivo experiments were scored according to commonly recognised measures of success relevant to each experiment. The correlation of in vitro with in vivo scores for each assay alone and in combination was assessed. A surprisingly poor correlation between in vitro and in vivo assessments of biomaterials was revealed indicating a clear need for further development of relevant in vitro assays. There was no significant overall correlation between in vitro and in vivo outcome. The mean in vitro scores revealed a trend of covariance to in vivo score with 58 %. The inadequacies of the current in vitro assessments highlighted here further stress the need for the development of novel approaches to in vitro biomaterial testing and validated pre-clinical pipelines.

Bone induction at physiological doses of BMP through localization by clay nanoparticle gels.

Bone Morphogenic Protein 2 (BMP2) can induce ectopic bone. This ability, which first motivated the widespread application of BMP2 in fracture healing and spinal arthrodesis has, more recently, been indicated as one of several serious adverse effects associated with the supra-physiological doses of BMP2 relied upon for clinical efficacy. Key to harnessing BMPs and other agents safely and effectively will be the ability to localize activity at a target site at substantially reduced doses. Clay (Laponite) nanoparticles can self assemble into gels under physiological conditions and bind growth factors for enhanced and localized efficacy. Here we show the ability to localize and enhance the activity of BMP2 to achieve ectopic bone formation at doses within the sub-microgram per ml range of concentrations sufficient to induce differentiation of responsive cell populations in vitro and at approximately 3000 fold lower than those employed in clinical practice.

Cold water cleaning of brain proteins, biofilm and bone - harnessing an ultrasonically activated stream.

In the absence of sufficient cleaning of medical instruments, contamination and infection can result in serious consequences for the health sector and remains a significant unmet challenge. In this paper we describe a novel cleaning system reliant on cavitation action created in a free flowing fluid stream where ultrasonic transmission to a surface, through the stream, is achieved using careful design and control of the device architecture, sound field and the materials employed. Cleaning was achieved with purified water at room temperature, moderate fluid flow rates and without the need for chemical additives or the high power consumption associated with conventional strategies. This study illustrates the potential in harnessing an ultrasonically activated stream to remove biological contamination including brain tissue from surgical stainless steel substrates, S. epidermidis biofilms from glass, and fat/soft tissue matter from bone structures with considerable basic and clinical applications.

From bench to clinic and back: skeletal stem cells and impaction bone grafting for regeneration of bone defects.

Tissue engineering offers enormous potential for bone regeneration. Despite extensive in vitro and in vivo work, few strategies translate into clinical practice. This paper describes the combination of skeletal stem cells (SSCs) and impaction bone grafting (IBG) for the treatment of patients with bone defects associated with avascular necrosis of the femoral head. SSCs and milled allograft were impacted into necrotic bone in the femoral heads of four patients. Three patients remained asymptomatic at 22-44 month follow-up, but one patient has required total hip replacement (both hips). This has allowed retrieval of the femoral heads, which were analysed structurally and functionally by µCT, histology and mechanical testing. A central channel of impacted bone was found in the femoral heads, which displayed a mature trabecular micro-architecture. The impacted bone was denser than the surrounding trabecular bone, as strong in compression and with histological micro-architecture comparable to that of trabecular bone. Analysis of the retrieved femoral head samples has demonstrated that this tissue-engineering strategy regenerates bone that is both structurally and functionally analogous to normal trabecular bone. SSCs, together with IBG, have proved an effective treatment for avascular necrosis of the femoral head and offer significant potential for the broader spectrum of bone defects.

A tissue engineering strategy for the treatment of avascular necrosis of the femoral head.

BACKGROUND & PURPOSE: Skeletal stem cells (SSCs) and impaction bone grafting (IBG) can be combined to produce a mechanically stable living bone composite. This novel strategy has been translated to the treatment of avascular necrosis of the femoral head. Surgical technique, clinical follow-up and retrieval analysis data of this translational case series is presented. METHODS: SSCs and milled allograft were impacted into necrotic bone in five femoral heads of four patients. Cell viability was confirmed by parallel in vitro culture of the cell-graft constructs. Patient follow-up was by serial clinical and radiological examination. Tissue engineered bone was retrieved from two retrieved femoral heads and was analysed by histology, microcomputed tomography (µCT) and mechanical testing. RESULTS: Three patients remain asymptomatic at 22- to 44-month follow-up. One patient (both hips) required total hip replacement due to widespread residual necrosis. Retrieved tissue engineered bone demonstrated a mature trabecular micro-architecture histologically and on µCT. Bone density and axial compression strength were comparable to trabecular bone. CONCLUSIONS: Clinical follow-up shows this to be an effective new treatment for focal early stage avascular necrosis of the femoral head. Unique retrieval analysis of clinically translated tissue engineered bone has demonstrated regeneration of tissue that is both structurally and functionally analogous to normal trabecular bone.

Assessing the potential of colony morphology for dissecting the CFU-F population from human bone marrow stromal cells.

Mesenchymal stem cells (MSCs) provide an ideal cell source for bone tissue engineering strategies. However, bone marrow stromal cell (BMSC) populations that contain MSCs are highly heterogeneous expressing a wide variety of proliferative and differentiation potentials. Current MSC isolation methods employing magnetic-activated and fluorescent-activated cell sorting can be expensive and time consuming and, in the absence of specific MSC markers, fail to generate homogeneous populations. We have investigated the potential of various colony morphology descriptors to provide correlations with cell growth potential. Density-independent colony forming unit-fibroblastic (CFU-F) capacity is a MSC prerequisite and resultant colonies display an array of shapes and sizes that might be representative of cell function. Parent colonies were initially categorised according to their diameter and cell density and grouped before passage for the subsequent assessment of progeny colonies. Whereas significant morphological differences between distinct parent populations indicated a correlation with immunophenotype, enhanced CFU-F capacity was not observed when individual colonies were isolated according to these morphological parameters. Colony circularity, an alternative morphological measure, displayed a strong correlation with subsequent cell growth potential. The current study indicates the potential of morphological descriptors for predicting cell growth rate and suggests new directions for research into dissection of human BMSC CFU-F populations.

Community-hospital partnerships. The Quick Response Team.

The Quick Response Team project was an intervention designed and implemented by the Capital Regional District Care Program in partnership with the Greater Victoria Hospital Society. The aim was to address the health needs of frail elderly with multiple social, emotional, physical, and medical problems who were at risk for a custodial admission to acute care. The result was an innovation in organizational and program development that required human, material, and financial resource management to maintain client safety, well being and satisfaction, avert admissions to acute care, and identify new and relevant directions for community healthcare.