ABSTRACT
Papain having the characteristics of metal binding ability is immobilized on alginate bead. Design Expert Software (Version 7.1.6) uses Response Surface Methodology (RSM) for statistical designing of operating condition for immobilization of papain on alginate bead considering concentration of papain, concentration of sodium alginate, concentration of calcium chloride and pH as numeric factors and Specific Enzymatic Activity (SEA) of immobilized papain sample as response. Immobilization using 25.96 g/L papain, 20 g/L sodium alginate and 20 g/L calcium chloride at pH 7 gives the desired product as indicated by ANOVA (Analysis of Variance). Three parameters viz., initial concentration of mercury (II), amount of AIP and pH are varied in a systematic manner. Maximum 98.88% removal of mercury (II) has been achieved within 8 min when simulated aqueous solution of mercury (II) with initial concentration of 10mg/L has been contacted with 5 g of AIP at pH 9 and at 35 degrees C in a batch contactor. A mathematical model has been developed and the value of equilibrium constant for binding of mercury (II) with AIP has been found to be 126797.3.
Subject(s)
Alginates/chemistry , Enzymes, Immobilized/metabolism , Mercury/isolation & purification , Microspheres , Models, Biological , Papain/metabolism , Biodegradation, Environmental , Caseins/metabolism , Enzyme Stability , Enzymes, Immobilized/ultrastructure , Glucuronic Acid/chemistry , Hexuronic Acids/chemistry , Hydrogen-Ion Concentration , Hydrolysis , Kinetics , Papain/ultrastructure , Solutions , Spectrometry, X-Ray Emission , Temperature , Time FactorsABSTRACT
In the present work mercury has been eradicated from its aqueous solution using papain, immobilized on activated charcoal by physical adsorption method. Operating parameters for adsorption of papain on activated charcoal like pH, amount of activated charcoal, initial concentration of papain in solution have been varied in a suitable manner for standardization of operating conditions for obtaining the best immobilized papain sample based on their specific enzymatic activity. The immobilized papain sample obtained at initial papain concentration 40.0 g/L, activated charcoal amount 0.5 g and pH 7 shows the best specific enzymatic activity. This sample has been designated as charcoal-immobilized papain (CIP) and used for further studies of mercury removal. Adsorption equilibrium data fit most satisfactorily with the Langmuir isotherm model for adsorption of papain on activated charcoal. Physicochemical characterization of CIP has been done. The removal of mercury from its simulated solution of mercuric chloride using CIP has been studied in a lab-scale batch contactor. The operating parameters viz., the initial concentration of mercury in solution, amount of CIP and pH have been varied in a prescribed manner. Maximum removal achieved in the batch study was about 99.4% at pH 7, when initial metal concentration and weight of CIP were 20.0mg/L and 0.03 g respectively. Finally, the study of desorption of mercury has been performed at different pH values for assessment of recovery process of mercury. The results thus obtained have been found to be satisfactory.
