ABSTRACT
This work reports the enzymatic production of mono- and diacylglycerols under the influence of ultrasound irradiation, in a solvent-free system, with and without the presence of surfactants at a constant temperature of 65°C, glycerol to oil molar ratio of 2:1 and a commercial immobilized lipase (Novozym 435) as catalyst. For this purpose, two operation modes were adopted: the use of a sonotrode (ultrasonic probe), without agitation, varying reaction time, irradiation amplitude (25-45% of the total power) and type of surfactant, and a mechanically stirred reactor (600 rpm) under ultrasound irradiation in a water bath, testing different surfactants. Results show that very satisfactory MAG and DAG yields, above 50 wt.%, can be obtained without the use of surfactant, at mild irradiation power supply (â¼130 W), with no important enzyme activity losses verified, in a relatively short reaction time (2h), and low enzyme content (7.5 wt.%). Also, reaction kinetic results show that contents of MAG+DAG as high as â¼65 wt.% can be achieved at longer times (6h), indicating a promising route for producing MAG and DAG using ultrasound irradiation.
Subject(s)
Diglycerides/chemical synthesis , Diglycerides/radiation effects , Food Handling/methods , Plant Oils/chemistry , Plant Oils/radiation effects , Sonication/methods , Diglycerides/isolation & purification , Lipase/chemistry , Olive Oil , Radiation Dosage , Solvents/chemistryABSTRACT
This work reports new experimental data and mathematical modeling of lipase-catalyzed biodiesel production using soybean oil and ethanol as substrates and pressurized n-propane as solvent. The experiments were carried out in a batch reactor, recording the reaction kinetics and evaluating the effects of temperature in the range of 45-70 degrees C, enzyme content from 1 to 20 wt% and oil to ethanol molar ratios of 1:3, 1:6, 1:9 and 1:15. The solvent to substrates mass ratio and pressure were set at 2:1 and 50 bar, respectively. Results showed that lipase-catalyzed alcoholysis in propane medium might be a potential alternative to conventional techniques for biodiesel production, since good conversions were obtained at mild temperature and pressure conditions. The semi-empirical mathematical model based on balance equations, adopted to describe the transesterification kinetics in pressurized n-propane, yielded relative deviations between experimental and calculated values lower than 10%, thus allowing a satisfactory representation of experimental results and a better understanding of the transesterification reaction.
