Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters










Database
Publication year range
1.
Orthod Craniofac Res ; 20(3): 152-163, 2017 Aug.
Article in English | MEDLINE | ID: mdl-28660731

ABSTRACT

OBJECTIVE: To evaluate the influence of the maturational stages of zygomaticomaxillary sutures (ZMS) on the response to maxillary protraction. SUBJECTS AND METHODS: A total of 40 Class III patients were treated retrospectively with either a combination of rapid maxillary expansion and facial mask (RME/FM) or bone-anchored maxillary protraction (BAMP). The RME/FM group consisted of 18 patients (mean age 8.3 years), while the BAMP group was comprised of 22 patients (mean age 11.8 years). The initial CBCT images (T1) of the ZMSs were classified blindly. 3D models from CBCT images at the start and at the end of orthopaedic treatment were registered on the anterior cranial base, and corresponding structures were measured on colour-coded maps and semitransparent overlays. The amounts of protraction of the maxilla, zygoma, orbitale and maxillary first molars for both groups were analysed with two-way ANOVA with Holm-Sidak post hoc test for multiple comparisons. RESULTS: A significant association was found between the early maturation stages of the ZMSs and the amount of maxillary protraction, regardless of the protraction method used. Class III patients with ZMS stages A and B showed greater maxillary protraction than patients at stage C. CONCLUSION: The maturational stages of ZMS are associated with the response maxillary protraction.


Subject(s)
Cranial Sutures/growth & development , Extraoral Traction Appliances , Malocclusion, Angle Class III/therapy , Maxillofacial Development , Orthodontic Anchorage Procedures/methods , Palatal Expansion Technique , Adolescent , Brazil , Child , Child, Preschool , Cone-Beam Computed Tomography , Cranial Sutures/diagnostic imaging , Female , Humans , Male , Malocclusion, Angle Class III/diagnostic imaging , Models, Dental , Reproducibility of Results , Retrospective Studies , Tooth, Deciduous
2.
Ned Tijdschr Tandheelkd ; 121(2): 91-6, 2014 Feb.
Article in Dutch | MEDLINE | ID: mdl-24640296

ABSTRACT

A Class III malocclusion is mainly caused by a hypoplastic maxilla and therefore the treatment is principally aimed at stimulating the growth of the maxilla. Disadvantages of conventional treatment methods are that treatment effects are mainly dentoalveolar rather than skeletal and that there is often an increase in the height of the lowerface. Moreover, patients are not always cooperative about wearing extra-oral appliances. Because of these disadvantages, a new treatment approach has been developed which makes use of skeletal anchoring. In this new technique, called 'bone anchored maxillary protraction, bone anchors are placed on both sides of the maxilla and the mandibula, onto which Class III elastics are attached. The literature shows that good results have been achieved with this method. Disadvantages of this method are that the placement of the bone anchors requires a surgical procedure and that complications, like the loosening or breaking of the anchors, can occur.


Subject(s)
Malocclusion, Angle Class III/therapy , Maxilla/abnormalities , Orthodontic Anchorage Procedures/instrumentation , Extraoral Traction Appliances , Humans , Orthodontic Appliance Design , Patient Satisfaction
3.
Eur J Orthod ; 33(2): 121-5, 2011 Apr.
Article in English | MEDLINE | ID: mdl-21187527

ABSTRACT

The aim of the present morphometric investigation was to evaluate the effects of bone-anchored maxillary protraction (BAMP) in the treatment of growing patients with Class III malocclusion. The shape and size changes in the craniofacial configuration of a sample of 26 children with Class III malocclusions consecutively treated with the BAMP protocol were compared with a matched sample of 15 children with untreated Class III malocclusions. All subjects in the two groups were at a prepubertal stage of skeletal development at time of first observation. Average duration of treatment was 14 months. Significant treatment-induced modifications involved both the maxilla and the mandible. The most evident deformation consisted of marked forward displacement of the maxillary complex with more moderate favourable effects in the mandible. Deformations in the vertical dimension were not detected. The significant deformations were associated with significant differences in size in the group treated with the BAMP protocol.


Subject(s)
Cephalometry/methods , Malocclusion, Angle Class III/therapy , Maxilla/pathology , Orthodontic Anchorage Procedures/instrumentation , Orthodontic Appliance Design , Age Determination by Skeleton , Bone Plates , Case-Control Studies , Child , Chin/pathology , Cone-Beam Computed Tomography , Ethmoid Bone/pathology , Female , Follow-Up Studies , Frontal Bone/pathology , Humans , Male , Mandible/growth & development , Mandible/pathology , Mandibular Condyle/pathology , Maxilla/growth & development , Nasal Bone/pathology , Orthodontic Anchorage Procedures/methods , Orthodontic Appliances , Sella Turcica/pathology , Sphenoid Bone/pathology
4.
Orthod Craniofac Res ; 13(1): 21-7, 2010 Feb.
Article in English | MEDLINE | ID: mdl-20078791

ABSTRACT

OBJECTIVES: To evaluate whether orthodontic loading has an effect on miniplate stability and bone mineral density (BMD) around the screws supporting those miniplates. SETTING AND SAMPLE POPULATION: Two miniplates were inserted in each jaw quadrant of 10 dogs. MATERIAL AND METHODS: Two weeks later, coil springs were placed between the miniplates of one upper quadrant and between those of the contralateral lower quadrant. The other miniplates remained non-loaded. The dogs were sacrificed 7 or 29 weeks after surgery, and the jaws were scanned with peripheral Quantitative Computed Tomography (pQCT) to assess BMD. RESULTS: The success rate was not significantly different for the loaded and the non-loaded miniplates, but was significantly higher for the maxillary compared to the mandibular ones. Mobility, associated with local inflammation, most often occurred during the transition between primary and secondary stability. pQCT showed higher BMD around mandibular vs. maxillary screws, without significant difference between loaded and non-loaded ones. Furthermore, load direction did not lead to any significant difference in BMD. CONCLUSION: Miniplate stability and BMD of the adjacent bone did not appear to depend significantly on orthodontic loading, but rather on the receptor site anatomy.


Subject(s)
Bone Density , Bone Plates , Dental Stress Analysis , Orthodontic Anchorage Procedures/instrumentation , Tooth Movement Techniques , Animals , Bone Screws , Dogs , Kaplan-Meier Estimate , Male , Miniaturization , Titanium , Tomography, X-Ray Computed/methods
5.
Clin Oral Implants Res ; 19(10): 1054-62, 2008 Oct.
Article in English | MEDLINE | ID: mdl-18828822

ABSTRACT

OBJECTIVES: The objectives of this animal study were to evaluate if orthodontic loading has an impact on osseointegration of screws supporting miniplates, and to describe the histological components of the bone-screw interface. MATERIALS AND METHODS: Eighty orthodontic miniplates were placed in the jaws of 10 dogs. After 2 weeks, a 125 g force was applied between the miniplates of one upper quadrant of each dog and between those of the controlateral lower quadrant. The others, nonloaded miniplates, were considered as controls. Five dogs were sacrificed 7 weeks after implantation and the remaining five dogs after 29 weeks [Short Term (ST) and Long Term (LT) groups, respectively]. Fluorochromes were injected at implantation and at sacrifice. Jaw quadrants were dissected, embedded, cut into undecalcified transverse sections through the screws and finally submitted to microradiographic analysis to allow assessment of bone-implant contact (BIC) and bone volume/total volume (BV/TV). The sections were observed under UV light and stained in order to examine them under ordinary light. RESULTS: Osseointegration occurred around 90/160 screws and consisted mainly in limited repair and remodelling processes of lamellar bone, without inflammation. Wide variations were observed in BIC and BV/TV, but without any significant difference, neither between the loaded and the nonloaded screws, nor according to the direction of load, whereas they were significantly higher in the LT than in the ST group. Nonosseointegrated screws were surrounded by fibrous tissue. Osteoblastic activity, when present in front of these screws, was not sufficient to achieve stability. CONCLUSIONS: Osseointegration underlying orthodontic anchorage was not affected by loading. BIC increased with time and varied according to implantation site. Particularly the tight-fitting screw insertion appeared crucial in determining the appropriate bone healing response.


Subject(s)
Bone Plates , Bone Screws , Mandible/surgery , Maxilla/surgery , Orthodontic Anchorage Procedures/instrumentation , Animals , Bone Remodeling/physiology , Coloring Agents , Dogs , Equipment Failure , Fibrosis , Fluorescent Dyes , Male , Mandible/pathology , Maxilla/pathology , Microradiography , Osseointegration/physiology , Osteoblasts/pathology , Osteocytes/pathology , Stress, Mechanical , Surface Properties , Time Factors , Ultraviolet Rays
6.
Am J Orthod Dentofacial Orthop ; 90(1): 29-36, 1986 Jul.
Article in English | MEDLINE | ID: mdl-3460344

ABSTRACT

Laser speckle interferometry, recently developed for noninvasive measurement of small displacements (microns), was used to study the movement of maxillary molars submitted to extraoral traction. Using an antenna-headgear at different horizontal levels, loadings of 700 gm were applied perpendicular to the long axes of these teeth. Bodily movement was observed when the traction line passed slightly occlusal to the trifurcation of the roots. Therefore, the center of resistance of the upper molar was experimentally localized at this level. Laser speckle interferometry proved to be a promising technique for dental research.


Subject(s)
Extraoral Traction Appliances , Molar/physiology , Orthodontic Appliances, Removable , Skull/physiology , Tooth Movement Techniques , Biomechanical Phenomena , Humans , Interferometry , Lasers , Models, Biological , Stress, Mechanical
SELECTION OF CITATIONS
SEARCH DETAIL
...