Two-year clinical and radiographic evaluation of ACTIVA BioACTIVE versus Compomer (Dyract® eXtra) in the restoration of class-2 cavities of primary molars: a non-inferior split-mouth randomised clinical trial.

OBJECTIVES: The trial aimed to compare the clinical performance and radiographic success of ACTIVA BioACTIVE versus Compomer in restoring class-II cavities of primary molars. MATERIALS AND METHODS: A non-inferior split-mouth design was considered. A pre-calculated sample size of 96 molars (48 per group) with class-2 cavities of twenty-one children whose ages ranged from 5 to 10 years were randomly included in the trial. Pre-operative Plaque Index (PI), DMFT/dmft scores and the time required to fill the cavity were recorded. Over 24 months, the teeth were clinically evaluated every six months and radiographically every 12 months by two calibrated and blinded evaluators using the United States public health service (USPHS)-Ryge criteria. The two-sided 95% confidence interval (CI) for the difference in success rate was considered to assess non-inferiority, and the margin was set at -18%. The linear mixed model and Firth's logistic regression model were used for data analysis (P < 0.05). RESULTS: After 24 months, 86 teeth (43 per group) were evaluated. The mean PI score was 1.1(± 0.9), while DMFT/dmft was 0.35 (± 0.74) and 6.55 (± 2.25) respectively. The clinical and radiographic success rate of Dyract vs. ACTIVA was 95.3% and 88.3% vs. 93% and 86%, respectively. The two-sided 95% CI for the difference in success rate (-2.3%) was - 3.2 to 1.3% and didn't reach the predetermined margin of -18% which had been anticipated as the non-inferiority margin. Clinically, ACTIVA had a significantly better colour match (P = 0.002) but worse marginal discolouration (P = 0.0143). There were no significant differences regarding other clinical or radiographic criteria (P > 0.05). ACTIVA took significantly less placement time than Dyract, with a mean difference of 2.37 (± 0.63) minutes (P < 0.001). CONCLUSION: The performance of ACTIVA was not inferior to Dyract and both materials had a comparable high clinical and radiographic performance in children with high-caries experience. ACTIVA had a significantly better colour match but more marginal discolouration. It took significantly less time to be placed in the oral cavity. TRIAL REGISTRATION: The study was registered at ClinicalTrials.gov on 4 May 2018 (#NCT03516838).

Effect of Intracoronal Sealing Biomaterials on the Histological Outcome of Endodontic Revitalisation in Immature Sheep Teeth-A Pilot Study.

The influence of intracoronal sealing biomaterials on the newly formed regenerative tissue after endodontic revitalisation therapy remains unexplored. The objective of this study was to compare the gene expression profiles of two different tricalcium silicate-based biomaterials alongside the histological outcomes of endodontic revitalisation therapy in immature sheep teeth. The messenger RNA expression of TGF-ß, BMP2, BGLAP, VEGFA, WNT5A, MMP1, TNF-α and SMAD6 was evaluated after 1 day with qRT-PCR. For evaluation of histological outcomes, revitalisation therapy was performed using Biodentine (n = 4) or ProRoot white mineral trioxide aggregate (WMTA) (n = 4) in immature sheep according to the European Society of Endodontology position statement. After 6 months' follow-up, one tooth in the Biodentine group was lost to avulsion. Histologically, extent of inflammation, presence or absence of tissue with cellularity and vascularity inside the pulp space, area of tissue with cellularity and vascularity, length of odontoblast lining attached to the dentinal wall, number and area of blood vessels and area of empty root canal space were measured by two independent investigators. All continuous data were subjected to statistical analysis using Wilcoxon matched-pairs signed rank test at a significance level of p < 0.05. Biodentine and ProRoot WMTA upregulated the genes responsible for odontoblast differentiation, mineralisation and angiogenesis. Biodentine induced the formation of a significantly larger area of neoformed tissue with cellularity, vascularity and increased length of odontoblast lining attached to the dentinal walls compared to ProRoot WMTA (p < 0.05), but future studies with larger sample size and adequate power as estimated by the results of this pilot study would confirm the effect of intracoronal sealing biomaterials on the histological outcome of endodontic revitalisation.

Evaluation of marginal and internal fit of lithium disilicate CAD-CAM crowns with different finish lines by using a micro-CT technique.

STATEMENT OF PROBLEM: Whether the precision of fit of computer-aided design and computer-aided manufacturing (CAD-CAM) complete crowns is affected by the finish line configuration is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the marginal and internal fit of CAD-CAM ceramic crowns made from lithium disilicate based on 3 different finish lines (rounded shoulder, chamfer, feather-edge). MATERIALS AND METHODS: Thirty anterior lithium disilicate complete crowns (n=10 per finish line group) were fabricated by following a completely digital workflow based on digital scans made with the TRIOS scanner. The crowns were adhesively cemented on duplicate dies of the respective prepared Typodont teeth, and the marginal gap, absolute marginal discrepancy, and internal gap were evaluated by using microcomputed tomography (µCT). A total of 66 values were obtained for each specimen from sagittal and transaxial sections, and a rendering software program was used to calculate the volume of the cement gap for each specimen by means of 3D region growing. Two-way ANOVA, Tukey post hoc tests with Bonferroni correction, and the Kruskal-Wallis test were used to compare the values between the experimental groups (α=.05). RESULTS: Marginal gap and absolute marginal discrepancy values were statistically significantly different between groups. In ascending order, marginal gap values were 23 ±14 µm for rounded shoulder, 54 ±28 µm for chamfer, and 96 ±36 µm for feather-edge finish lines. Absolute marginal discrepancy values were 96 ±34 µm for rounded shoulder, 124 ±37 µm for chamfer, and 157 ±34 µm for feather-edge finish lines. Internal gap values were 111 ±14 µm for feather-edge, 136 ±22 µm for chamfer, and 168 ±25 µm for rounded shoulder finish lines. The differences in cement volume between groups were not statistically significant (P=.200). CONCLUSIONS: All 3 finish lines produced marginal gaps within the range of clinically accep table values. Lithium disilicate CAD crowns with a rounded shoulder finish line had the best marginal fit but the poorest internal fit, and lithium disilicate CAD crowns with a feather-edge finish line had the best internal fit but the poorest marginal fit.

Clinical Evaluation of Resin Composite CAD/CAM Restorations Placed by Undergraduate Students.

To evaluate the clinical outcomes of resin composite CAD/CAM restorations in a prospective cohort study, and to assess patient and operator satisfaction after restoration placement, 59 indirect resin composite were placed by supervised undergraduate students, of which 43 restorations were followed over a mean period of 28 months (14-44 months) and evaluated using USPHS criteria. Patient and operator satisfaction levels were assessed using a visual analogue scale (VAS) after restoration placement. A total of 37 patients and 47 restorations were included for further study. Four teeth were extracted-three due to extensive drug-induced secondary caries in the same patient, and one tooth due to large periapical periodontitis after 44 months of service. The overall survival rate was 91.4%, and success rate was 87.2%. Differences between baseline and endpoint scores were significant for marginal discoloration (p < 0.05) and adaptation (p < 0.001). Color match (p < 0.05) and surface texture (p < 0.001) differed significantly, affecting all restoration types. VAS scores for patient and operator satisfaction showed a significant rank correlation (p < 0.01), and pairwise comparison showed significant differences for mean overall patient and operator VAS scores (p < 0.001). Lava Ultimate CAD/CAM may be considered a suitable material for overlays and endocrown restorations when combined with IDS, air abrasion, and MDP-containing adhesive systems. Marginal disintegration may present in inlays and onlays over time.

The Decisive Role of Laser Doppler Flowmetry for Pulp Preservation in Discolored Traumatized Teeth.

Objective: It has been stated that blood pigments within discolored teeth may interfere with Laser Doppler Flowmetry (LDF) measurements. The aim of this study was to assess pulp vitality with LDF in a cohort of discolored traumatized teeth referred for endodontic treatment or where the referring dentist had doubts regarding maintained tooth vitality. Background: Discoloration of teeth is a common sequel of dental trauma. Still today, it is taken as an indicator for root canal treatment. Transient apical breakdown (TAB) is confused with apical periodontitis, although it is a sequel of dental trauma in young mature teeth and will result in revascularization and dissolution of the apical radiolucency. Methods: A total of 26 patients with 28 discolored teeth, belonging to a cohort of referred patients with traumatized teeth referred for root canal treatment and/or pulp vitality assessment were screened on color with photographs by three investigators, with traditional sensibility tests and with a Moor VMS II LDF meter. Results: The color of the intrinsically discolored teeth was grayish in 58% of teeth, blue 20%, pink/crimson 12%, and yellow 4%. Eighty-five percent were central maxillary incisors, 11% were mandibulary incisors. Thanks to LDF, 43% of the trauma cases in this small cohort with discoloration underwent root canal treatment instead of 70% with traditional sensibility tests as indicator. TAB was found in 11%. Conclusions: LDF was decisive in diagnosing vitality of discolored teeth and there was no negative impact of tooth discoloration on LDF measurements.

The calcium dynamics of human dental pulp stem cells stimulated with tricalcium silicate-based cements determine their differentiation and mineralization outcome.

Calcium (Ca2+) signalling plays an indispensable role in dental pulp and dentin regeneration, but the Ca2+ responses of human dental pulp stem cells (hDPSCs) stimulated with tricalcium silicate-based (TCS-based) dental biomaterials remains largely unexplored. The objective of the present study was to identify and correlate extracellular Ca2+ concentration, intracellular Ca2+ dynamics, pH, cytotoxicity, gene expression and mineralization ability of human dental pulp stem cells (hDPSCs) stimulated with two different TCS-based biomaterials: Biodentine and ProRoot white MTA. The hDPSCs were exposed to the biomaterials, brought in contact with the overlaying medium, with subsequent measurements of extracellular Ca2+ and pH, and intracellular Ca2+ changes. Messenger RNA expression (BGLAP, TGF-ß, MMP1 and BMP2), cytotoxicity (MTT and TUNEL) and mineralization potential (Alizarin red and Von Kossa staining) were then evaluated. Biodentine released significantly more Ca2+ in the α-MEM medium than ProRoot WMTA but this had no cytotoxic impact on hDPSCs. The larger Biodentine-linked Ca2+ release resulted in altered intracellular Ca2+ dynamics, which attained a higher maximum amplitude, faster rise time and increased area under the curve of the Ca2+ changes compared to ProRoot WMTA. Experiments with intracellular Ca2+ chelation, demonstrated that the biomaterial-triggered Ca2+ dynamics affected stem cell-related gene expression, cellular differentiation and mineralization potential. In conclusion, biomaterial-specific Ca2+ dynamics in hDPSCs determine differentiation and mineralization outcomes, with increased Ca2+ dynamics enhancing mineralization.

Transcriptomic profiling of human dental pulp cells treated with tricalcium silicate-based cements by RNA sequencing.

OBJECTIVES: Tricalcium silicate (TCS)-based biomaterials induce differentiation of human dental pulp cells (hDPCs) into odontoblasts/osteoblasts, which is regulated by the interplay between various intracellular pathways and their resultant secretome. The aim of this study was to compare the transcriptome-wide effects by next-generation RNA sequencing of custom-prepared hDPCs stimulated with TCS-based biomaterials: ProRoot white MTA (WMTA) (Dentsply, Tulsa; Tulsa, OK) and Biodentine (Septodont, Saint Maur des Fosses, France). METHODS: Self-isolated hDPCs were seeded in a 6-well plate at a density of 5 × 105 cells per well. ProRoot white MTA and Biodentine were then placed in transwell inserts with a pore size of 0.4 µm and inserted in the well plate. RNA sequencing was performed after 3 and 7 days treatment. For post-validation, RT-PCR analyses were done on some of the RNA samples used for RNA sequencing. RESULTS: Our RNA sequencing results for the first time identified 7533 differentially expressed genes (DEGs) between different treatments and the number of DEGs in Biodentine was higher than ProRoot WMTA at both 3 and 7 days. Despite their differential gene expression, both the TCS-based biomaterial treatments showed gene expressions mainly involved in odontoblast differentiation, angiogenesis, neurogenesis, dentinogenesis, and tooth mineralization. CONCLUSIONS: The results of the present study illustrate that several important signalling pathways are induced by hDPCs stimulated with TCS-based biomaterials. CLINICAL RELEVANCE: The differential expression of the genes associated with odontogenesis, angiogenesis, neurogenesis, dentinogenesis, and mineralization may affect the prognosis of teeth treated with Biodentine or ProRoot white MTA.

Biallelic TANGO1 mutations cause a novel syndromal disease due to hampered cellular collagen secretion.

The transport and Golgi organization 1 (TANGO1) proteins play pivotal roles in the secretory pathway. Full length TANGO1 is a transmembrane protein localised at endoplasmic reticulum (ER) exit sites, where it binds bulky cargo within the ER lumen and recruits membranes from the ER Golgi intermediate compartment to create an exit route for their export. Here we report the first TANGO1-associated syndrome in humans. A synonymous substitution that results in exon eight skipping in most mRNA molecules, ultimately leading to a truncated TANGO1 protein was identified as disease-causing mutation. The four homozygously affected sons of a consanguineous family display severe dentinogenesis imperfecta, short stature, various skeletal abnormalities, insulin-dependent diabetes mellitus, sensorineural hearing loss, and mild intellectual disability. Functional studies in HeLa and U2OS cells revealed that the corresponding truncated TANGO1 protein is dispersed in the ER and its expression in cells with intact endogenous TANGO1 impairs cellular collagen I secretion.

How standard deviation contributes to the validity of a LDF signal: a cohort study of 8 years of dental trauma.

The aim of this cohort study was to document the potential of laser Doppler flowmetry (LDF) for diagnosing tooth vitality in traumatized teeth in a population of 88 referred patients with dental trauma over a period of 8 years (2011-2018). The main reason to refer was tooth discoloration (26%), and the main trauma cause was a traffic injury (35%). Taking into account that referral for LDF is best given within the week after trauma, 66% of referrals were overdue. In 73% of cases, root canal treatment could be avoided, and in 65%, the presence of a fixed orthodontic retainer showed beneficial for pulp recovery. Data of 394 teeth were collected and submitted to multilevel modelling statistics. As a general conclusion, both LDF perfusion and concentration values proved to be highly reliable in the appreciation of tooth vitality. The difference of variability of standard deviation and range of LDF measurements involving intra-subject control teeth showed statistically significant in discriminating between vital and non-vital pulps. In non-vital teeth, the diagnostic combination of LDF, sensibility tests and peri-apical X-ray is advised.

Genetic study of non-syndromic tooth agenesis through the screening of paired box 9, msh homeobox 1, axin 2, and Wnt family member 10A genes: a case-series.

Non-syndromic tooth agenesis (NSTA) is the most common developmental anomaly in humans. Several studies have been conducted on dental agenesis and numerous genes have been identified. However, the pathogenic mechanisms responsible for NSTA are not clearly understood. We studied a group of 28 patients with sporadic NSTA and nine patients with a family history of tooth agenesis. We focused on four genes - paired box 9 (PAX9), Wnt family member 10A (WNT10A), msh homeobox 1 (MSX1), and axin 2 (AXIN2) - using direct Sanger sequencing of the exons and intron-exon boundaries. The most prevalent variants identified in PAX9 and AXIN2 genes were analyzed using the chi-square test. The sequencing results revealed a number of variants in the AXIN2 gene, including one novel missense mutation in one patient with agenesis of a single second premolar. We also identified one variant in the AXIN2 gene as being a putative risk factor for tooth agenesis. Only one missense mutation was identified in the WNT10A gene and this mutation was found in two patients. Interestingly, WNT10A is reported as the most prevalent gene mutated in the European population with NSTA.

Gene Expression Profiling and Molecular Signaling of Various Cells in Response to Tricalcium Silicate Cements: A Systematic Review.

INTRODUCTION: The aim of this study was to present a systematic review investigating the gene expression of various cells (other than dental pulp cells) in response to different variants of tricalcium silicate cements (TSCs). METHODS: A systematic search of the literature was performed by 2 independent reviewers followed by article selection and data extraction. Studies analyzing any cell type except dental pulp stem cells and any variant of tricalcium silicate cement either as the experimental or as the control group were included. RESULTS: A total of 41 relevant articles were included in this review. Among the included studies, ProRoot MTA (Dentsply, Tulsa, OK) was the most commonly studied (69.1%) TSC variant, and 11 cell types were identified, with 13 articles investigating gene expression in osteoblasts. A total of 39 different genes/molecules expressed were found in the selected studies. The experimental group (irrespective of the TSC variant) was identified to express significantly increased gene expression compared with the control group (untreated) in all included studies. Recent studies have provided useful insight into the gene expression and molecular signaling of various cells in response to TSCs, and new elements have been supplied on the pathways activated in this process. CONCLUSIONS: TSCs are capable of eliciting a favorable cellular response in periapical regeneration.

Characterization of a novel mutation in PAX9 gene in a family with non-syndromic dental agenesis.

BACKGROUND: Dental agenesis is the most common developmental anomaly in man and may present either as an isolated trait or as part of a syndrome, such as ectodermal dysplasia. Until now, the underlying molecular pathogenic mechanisms responsible for dental agenesis are still largely unknown. Several genetic and molecular studies have demonstrated that at least 300 genes are involved in tooth formation and development, coding for specific transcriptional factors, receptors or growth factors that are expressed at specific developmental stages. Dental agenesis in this respect is believed to result from altered expression of one or more of these factors during initiation and early morphogenesis of the tooth germ, and the first actors identified were MSX1 and PAX9. DESIGN: In this study, we focalized on a Tunisian family with a non-syndromic autosomal dominant form of tooth agenesis. In order to screen for the eventual genetic cause of dental agenesis in this family we sequenced 4 genes; PAX9, WNT10A, MSX1 and AXIN2 using Sanger sequencing. RESULTS: Direct Screening analysis of PAX9 gene, revealed a novel mutation p.Asp200Serfs*13. It consists of a duplication of 5 basepairs leading to a codon stop 13 position downstream. This novel mutation was found in all affected family members. CONCLUSIONS: In this report, we present the first genetic study of a Tunisian family with a non-syndromic autosomal dominant form of tooth agenesis, in which we identified in PAX9 gene a novel mutation. It most likely results in nonsense mediated RNA decay and haploinsifficiency that reduce the transactivation capacity of PAX9.

An Exploratory Case-Control Study on the Impact of IL-1 Gene Polymorphisms on Early Implant Failure.

BACKGROUND: The association between IL-1 gene polymorphisms and peri-implantitis has been well documented. However, data on the association with early implant failure are scarce. PURPOSE: The objective of this case-control study was to explore the impact of IL-1A (-889), IL-1B (-511), and IL-1B (+3,954) gene polymorphisms on early implant failure in Caucasians. MATERIALS AND METHODS: Between September 2004 and August 2007, 461 patients were treated with dental implants at the University Hospital in Ghent, Belgium. Fourteen subjects of this patient group who had experienced one or more early implant failures (within 6 months from implant installation) were recruited as "cases." Fourteen "controls," matched in terms of age, gender, and smoking habits, with only surviving implants, were selected from the same patient group. Allele and genotype analysis was performed on the basis of a blood sample by Sanger sequencing of polymerase chain reaction products containing the IL-1A (-889), IL-1B (-511), and IL-1B (+3,954) gene polymorphisms. RESULTS: A significant impact of the IL-1A (-889) T allele (p = .039) and the IL-1B (+3,954) T allele (p = .003) on early implant failure was demonstrated (odds ratios = 3.9 and 15.0, respectively). In addition, the genotypic distribution differed significantly between cases and controls for IL-1B (+3,954) (p = .015). CONCLUSIONS: The IL-1B (+3,954) gene polymorphism seems to affect osseointegration. Additional case-control studies in larger patient groups are needed to confirm this observation.

Gene Expression Profiling and Molecular Signaling of Dental Pulp Cells in Response to Tricalcium Silicate Cements: A Systematic Review.

INTRODUCTION: Signaling molecules and responding dental pulp stem cells are the 2 main control keys of dentin regeneration/dentinogenesis. The aim of this study was to present a systematic review investigating the gene expression of various dental pulp cells in response to different variants of tricalcium silicate cements. METHODS: A systematic search of the literature was performed by 2 independent reviewers followed by article selection and data extraction. Studies analyzing all sorts of dental pulp cells (DPCs) and any variant of tricalcium silicate cement either as the experimental or as the control group were included. RESULTS: A total of 39 articles were included in the review. Among the included studies, ProRoot MTA (Dentsply, Tulsa Dental, OK) was the most commonly used tricalcium silicate cement variant. The extracellular signal regulated kinase/mitogen-activated protein kinase pathway was the most commonly activated pathway to be identified, and similarly, dentin sialophosphoprotein osteocalcin dentin matrix acidic phosphoprotein 1, alkaline phosphatase, bone sialoprotein, osteopontin, type I collagen, and Runx2 were the most commonly expressed genes in that order of frequency. CONCLUSIONS: Biodentine (Septodont Ltd, Saint Maur des Faussés, France), Bioaggregate (Innovative Bioceramix, Vancouver, BC, Canada), and mineral trioxide aggregate stimulate the osteogenic/odontogenic capacity of DPCs by proliferation, angiogenesis, and biomineralization through the activation of the extracellular signal regulated kinase ½, nuclear factor E2 related factor 2, p38, c-Jun N-terminal kinase mitogen-activated protein kinase, p42/p44 mitogen-activated protein kinase, nuclear factor kappa B, and fibroblast growth factor receptor pathways. When DPCs are placed into direct contact with tricalcium silicate cements, they show higher levels of gene activation, which in turn could translate into more effective pulpal repair and faster and more predictable formation of reparative dentin.

Insight in the chemistry of laser-activated dental bleaching.

The use of optical radiation for the activation of bleaching products has not yet been completely elucidated. Laser light is suggested to enhance the oxidizing effect of hydrogen peroxide. Different methods of enhancing hydrogen peroxide based bleaching are possible. They can be classified into six groups: alkaline pH environment, thermal enhancement and photothermal effect, photooxidation effect and direct photobleaching, photolysis effect and photodissociation, Fenton reaction and photocatalysis, and photodynamic effect.

Laser teeth bleaching: evaluation of eventual side effects on enamel and the pulp and the efficiency in vitro and in vivo.

Light and heat increase the reactivity of hydrogen peroxide. There is no evidence that light activation (power bleaching with high-intensity light) results in a more effective bleaching with a longer lasting effect with high concentrated hydrogen peroxide bleaching gels. Laser light differs from conventional light as it requires a laser-target interaction. The interaction takes place in the first instance in the bleaching gel. The second interaction has to be induced in the tooth, more specifically in the dentine. There is evidence that interaction exists with the bleaching gel: photothermal, photocatalytical, and photochemical interactions are described. The reactivity of the gel is increased by adding photocatalyst of photosensitizers. Direct and effective photobleaching, that is, a direct interaction with the colour molecules in the dentine, however, is only possible with the argon (488 and 415 nm) and KTP laser (532 nm). A number of risks have been described such as heat generation. Nd:YAG and especially high power diode lasers present a risk with intrapulpal temperature elevation up to 22°C. Hypersensitivity is regularly encountered, being it of temporary occurrence except for a number of diode wavelengths and the Nd:YAG. The tooth surface remains intact after laser bleaching. At present, KTP laser is the most efficient dental bleaching wavelength.

An experimental study on periodontal regeneration after subcutaneous transplantation of rat molar with and without cryopreservation: an in vivo study.

This study analysed the effects of cryopreservation on periodontal regeneration of autotransplanted rat molars. First and second maxillary molars (n=92) of 24 four-week-old Wistar rats were gently extracted and autotransplanted into the abdominal tissue immediately (control group n=44) or after cryopreservation in liquid nitrogen for 7 days (experimental group n=48). At 1, 2, 4 and 10 weeks after transplantation, the transplanted molars were excised and regeneration of the periodontal tissues was analysed on histological sections stained with routine H&E and Goldner method. Different tissue responses were scored on a tooth basis: inflammation, regeneration of the periodontal ligament, resorption/apposition of cementum, and alveolar bone formation. Sixty-two teeth were available for histological evaluation, including 30 experimental and 32 control samples. One week after transplantation, both control and test teeth were surrounded by granulation tissue and some areas of root resorption could be seen. After 2 weeks, signs of regeneration of the periodontal ligament, cementum apposition, and new bone formation roughly coincided in both groups, however markedly retarded in the experimental group. After 4 weeks, regeneration progressed equally in both groups, presenting fewer areas of cementum apposition in experimental samples. Finally, 10 weeks after baseline transplantation, no significant differences between both groups could be observed. Cryopreservation followed by autotransplantation of extracted teeth in rats appears to have minimal detrimental effects on regeneration of periodontal tissues after integration periods of 1-10 weeks. However, the present findings indicated that the regeneration process in general is retarded for cryopreserved teeth, as compared to their immediately transplanted homologues.

Laser-assisted pulpotomy in primary teeth: a systematic review.

OBJECTIVE: The purpose of this systematic review was to identify high-quality articles comparing laser with conventional pulpotomy procedures, and to assess whether laser treatment may offer an appreciable benefit over conventional approaches. METHODS: A systematic search was implemented for MEDLINE, WEB of SCIENCE and Cochrane's CENTRAL databases (1980-2012) to identify eligible studies. Two reviewers independently assessed the methodological quality of the articles (Κ = 0.89) using specific study design-related quality assessment forms (Dutch Cochrane Collaboration). RESULTS: Seven articles met the inclusion criteria, of which five randomized control trials (RCT) and two case series (CS), involving Nd:YAG, Er:YAG, CO2 and 632/980 nm diode lasers. Although heterogeneity between pulpotomy studies was high, odds ratios (OR) were generally <1, indicating that laser is less successful than conventional pulpotomy techniques. CONCLUSION: Given the paucity and high heterogeneity of high-quality articles, general recommendations for the clinical use of laser in pulpotomy in primary teeth can yet not be formulated.

Healing of extraction sockets filled with BoneCeramic® prior to implant placement: preliminary histological findings.

BACKGROUND: Various grafting materials have been designed to minimize edentulous ridge volume loss following tooth extraction by encouraging new bone formation in healing sockets. BoneCeramic® is a composite of hydroxyapatite and bèta-tricalcium phosphate with pores of 100-500 microns. PURPOSES: The aim of this study was to evaluate bone regeneration in healing sockets substituted with BoneCeramic® prior to implant procedures. MATERIALS AND METHODS: Fifteen extraction sockets were substituted with BoneCeramic® and 14 sockets were left to heal naturally in 10 patients (mean age 59.6 years). Biopsies were collected only from the implant recipient sites during surgery after healing periods ranging from 6-74 weeks (mean 22). In total, 24 biopsies were available; 10 from substituted and 14 from naturally healed sites. In one site, the implant was not placed intentionally and, in four substituted sites, implant placement had to be postponed due to inappropriate healing, hence from five sites biopsies were not available. Histological sections were examined by transmitted light microscope. RESULTS: At the time of implant surgery, bone at substituted sites was softer than in controls, compromising initial implant stability. New bone formation at substituted sites was consistently poorer than in controls, presenting predominantly loose connective tissue and less woven bone. CONCLUSION: The use of BoneCeramic® as a grafting material in fresh extraction sockets appears to interfere with normal healing processes of the alveolar bone. On the basis of the present preliminary findings, its indication as a material for bone augmentation, when implant placement is considered within 6-38 weeks after extraction, should be revised.

Oral health in prevalent types of Ehlers-Danlos syndromes.

BACKGROUND: The Ehlers-Danlos syndromes (EDS) comprise a heterogenous group of heritable disorders of connective tissue, characterized by joint hypermobility, skin hyperextensibility and tissue fragility. Most EDS types are caused by mutations in genes encoding different types of collagen or enzymes, essential for normal processing of collagen. METHODS: Oral health was assessed in 31 subjects with EDS (16 with hypermobility EDS, nine with classical EDS and six with vascular EDS), including signs and symptoms of temporomandibular disorders (TMD), alterations of dental hard tissues, oral mucosa and periodontium, and was compared with matched controls. RESULTS: All EDS subjects were symptomatic for TMD and reported recurrent temporomandibular joint (TMJ) dislocations. Abnormal pulp shape (13%) and pulp calcification (78%) were observed in subjects affected with classical EDS. Caries experience was higher in EDS compared with controls and was related to poor oral hygiene, influenced by increased mucosal fragility and restraint of (wrist) joint mobility. The overall periodontal status in EDS was poor, with 62% of EDS subjects presenting high periodontal treatment needs (community periodontal index for treatment need, CPITN = II). CONCLUSION: Oral health may be severely compromised in EDS as a result of specific alterations of collagen in orofacial structures. When considering dental treatment in EDS, a number of tissue responses (mucosa, periodontium, pulp) and precautions (TMJ dislocation) should be anticipated.