ABSTRACT
The realization of isotopically enriched Ti targets for nuclear cross-section measurements requires particular attention, from the starting material preparation up to the deposition technique. In this work, a cryomilling process was developed and optimized, aimed at reducing the size of 49,50Ti metal sponge as provided by the supplier (size up to 3 mm), to the optimal size of 10 µm, to fit the High Energy Vibrational Powder Plating technique used for target manufacturing. The optimization of the cryomilling protocol and the HIVIPP deposition using natTi material was thus performed. The scarce amount of the enriched material to be treated (about 150 mg), the need to obtain a non-contaminated final powder and a uniform target thickness of about 500 µg/cm2 were taken into account. The 49,50Ti materials were then processed and 20 targets of each isotope were manufactured. Both powders and the final Ti targets produced were characterized by SEM-EDS analysis. The amount of Ti deposited was measured by weighing, indicating reproducible and homogeneous targets, with an areal density of 468 ± 110 µg/cm2 for 49Ti (n = 20) and 638 ± 200 µg/cm2 for 50Ti (n = 20). The uniformity of the deposited layer was also confirmed by the metallurgical interface analysis. The final targets were used for the cross section measurements of the 49Ti(p,x)47Sc and 50Ti(p,x)47Sc nuclear reaction routes aimed at the production of the theranostic radionuclide 47Sc.
ABSTRACT
The cross-sections of the 48Ti(p,x)47Sc, 46cSc, 44mSc, 44gSc, 43Sc, and 48V nuclear reactions were measured from 18 to 70 MeV, with particular attention to 47Sc production. Enriched 48Ti powder was deposited on an aluminum backing and the obtained targets were characterized via elastic backscattering spectroscopy at the INFN-LNL. Targets were exposed to low-intensity proton irradiation using the stacked-foils technique at the ARRONAX facility. Activated samples were measured using γ-spectrometry; the results were compared with the data int he literature and the theoretical TALYS-based values. A regular trend in the new values obtained from the different irradiation runs was noted, as well as a good agreement with the literature data, for all the radionuclides of interest: 47Sc, 46cSc, 44mSc, 44gSc, 43Sc, and 48V. 47Sc production was also discussed, considering yield and radionuclidic purity, for different 47Sc production scenarios.
