Broadband decoupling of intensity and polarization with vectorial Fourier metasurfaces.

Intensity and polarization are two fundamental components of light. Independent control of them is of tremendous interest in many applications. In this paper, we propose a general vectorial encryption method, which enables arbitrary far-field light distribution with the local polarization, including orientations and ellipticities, decoupling intensity from polarization across a broad bandwidth using geometric phase metasurfaces. By revamping the well-known iterative Fourier transform algorithm, we propose "à la carte" design of far-field intensity and polarization distribution with vectorial Fourier metasurfaces. A series of non-conventional vectorial field distribution, mimicking cylindrical vector beams in the sense that they share the same intensity profile but with different polarization distribution and a speckled phase distribution, is demonstrated. Vectorial Fourier optical metasurfaces may enable important applications in the area of complex light beam generation, secure optical data storage, steganography and optical communications.

Ptychography retrieval of fully polarized holograms from geometric-phase metasurfaces.

Controlling light properties with diffractive planar elements requires full-polarization channels and accurate reconstruction of optical signal for real applications. Here, we present a general method that enables wavefront shaping with arbitrary output polarization by encoding both phase and polarization information into pixelated metasurfaces. We apply this concept to convert an input plane wave with linear polarization to a holographic image with arbitrary spatial output polarization. A vectorial ptychography technique is introduced for mapping the Jones matrix to monitor the reconstructed metasurface output field and to compute the full polarization properties of the vectorial far field patterns, confirming that pixelated interfaces can deflect vectorial images to desired directions for accurate targeting and wavefront shaping. Multiplexing pixelated deflectors that address different polarizations have been integrated into a shared aperture to display several arbitrary polarized images, leading to promising new applications in vector beam generation, full color display and augmented/virtual reality imaging.

Correlative investigation of Mg doping in GaN layers grown at different temperatures by atom probe tomography and off-axis electron holography.

Correlation between off-axis electron holography and atom probe tomography (APT) provides morphological, chemical and electrical information about Mg doping (p-type) in gallium nitride (GaN) layers that have been grown at different temperatures at a nanometric scale. APT allows access to the three-dimensional distribution of atoms and their chemical nature. In particular, this technique allows visualisation of the Mg-rich clusters observed in p-doped GaN layers grown by metal-organic chemical vapour deposition. As the layer growth temperature increases, the cluster density decreases but their size indicted by the number of atoms increases. Moreover, APT reveals that threading dislocations are decorated with Mg atoms. Off-axis electron holography provides complementary information about the electrical activity of the Mg doping. As only a small fraction of dopant atoms are ionised at room temperature, this fraction is increased by annealing the specimen to 400 °C in situ in a transmission electron microscope (TEM). A strong reduction of the dopant electrical activity is observed for increases in the layer growth temperature. The correlation of APT with TEM-based techniques was shown to be a unique approach in order to investigate how the growth temperature affects both the chemical distribution and electrical activity of Mg dopant atoms.

Demonstration of Electrically Injected Semipolar Laser Diodes Grown on Low-Cost and Scalable Sapphire Substrates.

The last two decades have shown an increasing need for GaN-based laser diodes (LDs), which are currently only grown on bulk GaN substrates, which remain to date very expensive and/or only available in small sizes. The ever growing laser market will expand in the coming years, thanks to the development of automotive laser lighting, high-speed Li-Fi optical data transmission, LiDAR sensing for autonomous vehicles and smart cities, head-up displays, and AR/VR systems, in addition to biomedical and further industrial applications. These emerging technologies demand for mass-production of GaN-based lasers to be produced on large-size, low-cost, and industrially compatible substrates. To address this issue, we demonstrate the first electrically injected semipolar 440 nm LD on high-quality and low-defect-density (11-22) GaN templates grown on scalable and low-cost sapphire substrates. The LDs exhibit a threshold current density of 17 kA/cm2, a single facet output power of more than 200 mW at 2 A with a slope efficiency of 0.85 W/A, and a TE polarization having a ratio of 97.6%. These results enable the advancement of ultra-low-cost LDs while benefiting from the inherent advantages of semipolar GaN properties.

Study of efficient semipolar (11-22) InGaN green micro-light-emitting diodes on high-quality (11-22) GaN/sapphire template.

We investigated the electrical and optical performances of semipolar (11-22) InGaN green µLEDs with a size ranging from 20 × 20 µm2 to 100 × 100 µm2, grown on a low defect density and large area (11-22) GaN template on patterned sapphire substrate. Atom probe tomography (APT) gave insights on quantum wells (QWs) thickness and indium composition and indicated that no indium clusters were observed in the QWs. The µLEDs showed a small wavelength blueshift of 5 nm, as the current density increased from 5 to 90 A/cm2 and exhibited a size-independent EQE of 2% by sidewall passivation using atomic-layer deposition, followed by an extremely low leakage current of ~0.1 nA at -5 V. Moreover, optical polarization behavior with a polarization ratio of 40% was observed. This work demonstrated long-wavelength µLEDs fabricated on semipolar GaN grown on foreign substrate, which are applicable for a variety of display applications at a low cost.

Efficient Semipolar (11-22) 550 nm Yellow/Green InGaN Light-Emitting Diodes on Low Defect Density (11-22) GaN/Sapphire Templates.

We demonstrate efficient semipolar (11-22) 550 nm yellow/green InGaN light-emitting diodes (LEDs) with In0.03Ga0.97N barriers on low defect density (11-22) GaN/patterned sapphire templates. The In0.03Ga0.97N barriers were clearly identified, and no InGaN clusters were observed by atom probe tomography measurements. The semipolar (11-22) 550 nm InGaN LEDs (0.1 mm2 size) show an output power of 2.4 mW at 100 mA and a peak external quantum efficiency of 1.3% with a low efficiency drop. In addition, the LEDs exhibit a small blue-shift of only 11 nm as injection current increases from 5 to 100 mA. These results suggest the potential to produce high efficiency semipolar InGaN LEDs with long emission wavelength on large-area sapphire substrates with economical feasibility.