Pulpal Temperature Variances During Step-by-step Adhesive Restorative Procedure Using Three Different High-irradiance Light-curing Units.

The rise in temperature in pulp tissues is related not only to heat transfer by high-irradiance light-curing units (LCUs), but also to restorative procedures. This research aimed to compare the rise in pulp temperature (PT) induced by three LCUs at each restorative step while considering the influence of resin composite shade and thickness. To accomplish this, the investigators used a proposed experimental model replicating pulp fluid circulation with a controlled, simulated intraoral temperature in bovine incisors. The recorded external and internal PT ranged from 36.7°C to 37.1°C and 32.7°C to 33.0°C, respectively. A significant decrease of internal temperature was recorded during class V preparation, followed by a progressive and representative rise of temperature in the subsequent restorative steps. The temperature was significantly higher during light curing of the adhesive system using Valo compared to light curing using Elipar and Radii Cal. However, none of the analyzed devices produced a temperature that exceeded the pulp tolerance limit (a temperature increase over 5.5°C). The paired test showed no significant difference in pulp temperature associated with the thickness of the increment of resin composite. However, shade was found to have more influence on the amount of energy absorbed by pulp tissue-A1 samples showed significantly higher temperature variation compared to samples using the A4 shade of resin composite. To conclude, the microcirculation and the performance of procedures under constant air-water flux dissipate the heat absorbed by the pulp. Additionally, the data suggest that all three LCUs analyzed can be safely used in clinical procedures, and that the resin composite shade may influence the amount of irradiance delivered to the tooth surface and represents a significant factor in pulp temperature variance.

Comparison of Stud- Retentor Versus Bar-Clip Attachment as Implant- Supported Systems Used in Overdentures: A Systematic Review and Meta-Analysis.

This study aimed to perform a systematic review and meta-analysis to analyze the results obtained clinically for bar-clip versus stud-retainers in overdentures. Three databases (PubMed Central, MEDLINE, and BvSalud) were used beyond a manual search. The study followed strictly the inclusion and exclusion criteria, considering the PICO strategy. For the risk of bias and quality assessment of studies, in the case of RCT, there were six domains of analysis, and for non-RCT studies, the Modified Newcastle-Ottawa Scale was performed. A meta-analysis was developed using the available data for marginal bone loss (MBL) and survival rate. 25 studies were included. The stud-retentor had the lowest implant SR (87.6%) and the greatest MBL (1.96 mm). For the bar-clip system, the mean survival rate was 95.91%, with only 4 studies included for this system, and the mean MBL was 1.13 mm. Only 3 studies directly compared both systems quantitatively, showing a significantly greater MBL toward the stud-retention group. The results may not allow determination of the best system for overdenture (stud retentor or bar-clip). Therefore, most of the studies suggested the stud-retentor as a more preferable system due to better distribution of forces, biological peri-implant behavior, low-cost, and ease for removal facilitating the sanitization and/or repair.

A fast-reciprocating probe array for two-dimensional measurements in the divertor region of the Tokamak à configuration variable.

A detailed description of the construction and commissioning of the fast-moving reciprocating divertor Langmuir probe array on the Tokamak à Configuration Variable (TCV) is presented. A horizontal array of 24 Langmuir probes (12 Mach probes) combined with a fast vertical movement provides unprecedented two-dimensional measurements of the plasma properties across the entire divertor outer leg volume and up to the X-point. The L-shape probe arm has to be very compact to minimize plasma perturbations and, at the same time, has to house 24 coaxial transmission lines, withstand time-averaged heat fluxes of up to ≈30 MW/m2 and accelerations of up to 8 g, and be resilient to violent plasma disruptions. For the fast vertical motion of the probe arm, extending up to 38 cm into the TCV vacuum vessel, an assembly with a precise and powerful linear electric motor (up to 4000 N of force) was mounted in a 4 m high structure within the limited space below the TCV. The diagnostic has already performed measurements in ≈200 plasma discharges and has been hit by ≈20 disruptions without suffering any critical damage. The measurements are qualitatively and quantitatively consistent with other reference diagnostics, such as upstream electron Thomson scattering and downstream wall-embedded Langmuir probes, and are used extensively on the TCV for experimental divertor studies and for comparisons with edge transport and turbulence code results.

Effect of carbodiimide and chlorhexidine on the bond strength longevity of resin cement to root dentine after radiation therapy.

AIM: To evaluate the effect of carbodiimide (EDC) and chlorhexidine (CHX) on the bond strength (BS) of resin cement to root dentine of teeth submitted to radiotherapy. METHODOLOGY: One hundred and twenty extracted maxillary canines were selected and assigned to 2 groups (n = 60): nonirradiated and irradiated (30 cycles of 2 Gy, total 60 Gy). Roots lengths were standardized, and canals were prepared and filled. Post spaces were then prepared, and the samples were redistributed according to dentine treatment (n = 20): saline solution (SF); CHX 2%; or EDC 0.5M. After drying the post space, fibreglass posts were cemented. Cross-sectioned slices were obtained, and in half of the specimens of each subgroup (n = 10), the analysis was performed immediately; the others (n = 10) were stored for 10 months before analyses. The most cervical slice of each third was subjected to a push-out test and failure pattern analysis (n = 10), and the most apical slice submitted to the analysis of the adhesive interface by SEM (n = 5). The bond strength data were submitted to anova and Tukey tests, the adhesive interface adaptation was submitted to Kruskal-Wallis and Dunn's tests, and the Chi-square test was used to evaluate the type of failure. RESULTS: The irradiated specimens had significantly lower bond strength (13.8 ± 4.3) than the nonirradiated (18.1 ± 3.1; P < 0.001). For the irradiated teeth, the bond strengths were significantly lower in the SF and CHX groups (P < 0.001). Also, the bond strengths reduced significantly after 10 months in the SF and CHX groups (P < 0.001). Cohesive failures occurred in dentine for irradiated specimens. Poorer interface adaptation, dentine fractures and microfractures were observed in irradiated specimens, and better adaptation was observed for specimens after EDC treatment. CONCLUSIONS: Radiotherapy was associated with lower bond strength and worse interface adaptation. Dentine treatment with EDC contributed to adhesive interface longevity during the cementation of glass fibre posts in nonirradiated and irradiated teeth.

Langmuir probe electronics upgrade on the tokamak à configuration variable.

A detailed description of the Langmuir probe electronics upgrade for TCV (Tokamak à Configuration Variable) is presented. The number of amplifiers and corresponding electronics has been increased from 48 to 120 in order to simultaneously connect all of the 114 Langmuir probes currently mounted in the TCV divertor and main-wall tiles. Another set of 108 amplifiers is ready to be installed in order to connect 80 new probes, built in the frame of the TCV divertor upgrade. Technical details of the amplifier circuitry are discussed as well as improvements over the first generation of amplifiers developed at SPC (formerly CRPP) in 1993/1994 and over the second generation developed in 2012/2013. While the new amplifiers have been operated successfully for over a year, it was found that their silicon power transistors can be damaged during some off-normal plasma events. Possible solutions are discussed.

Cryptococcal Titan Cells: When Yeast Cells Are All Grown up.

Cryptococcus neoformans is a human pathogenic yeast that causes hundreds of thousands of deaths worldwide among susceptible individuals, in particular, HIV+ patients. This yeast has developed several adaptation mechanisms that allow replication within the host. During decades, this yeast has been well known for a very peculiar and unique structure that contributes to virulence, a complex polysaccharide capsule that surrounds the cell wall. In contrast to other fungal pathogens, such as Candida albicans or Aspergillus fumigatus, the role of morphological transitions has not been studied in the virulence of Cryptococcus neoformans since this yeast does not form hyphae during infection. However, in the last years, different groups have described the ability of this fungus to change its size during infection. In particular, Cryptococcus can form "titan cells," which are blastoconidia of an abnormal large size. Since their discovery, there is increasing evidence that these cells contribute, not only to long-term persistence in the host, but they can also actively participate in the development of the disease. Recently, several groups have simultaneously described different media that induce the appearance of titan cells in laboratory conditions. Using these conditions, new inducing factors and signaling pathways involved in this transition have been described. In this article, we will review the main phenotypic features of these cells, factors, and transduction pathways that induce cell growth, and how titan cells contribute to the disease caused by this pathogen.

Transgenerational epigenetic variance for body weight in meat quails.

We aimed to estimate transgenerational epigenetic variance for body weight using genealogical and phenotypic information in meat quails. Animals were individually weighted from 1 week after hatching, with weight records at 7, 14, 21, 28, 35 and 42 days of age (BW7, BW14, BW21, BW28, BW35 and BW42, respectively). Single-trait genetic analyses were performed using mixed models with random epigenetic effects. Variance components were estimated by the restricted maximum likelihood method. A grid search for values of autorecursive parameter (λ) ranging from 0 to 0.5 was used in the variance component estimation. This parameter is directly related to the reset coefficient (ν) and the epigenetic coefficient of transmissibility (1-ν). The epigenetic effect was only significant for BW7. Direct heritability estimates for body weight ranged in magnitude (from 0.15 to 0.26), with the highest estimate for BW7. Epigenetic heritability was 0.10 for BW7, and close to zero for the other body weights. The inclusion of the epigenetic effect in the model helped to explain the residual and non-Mendelian variability of initial body weight in meat quails.

Analysis of wall-embedded Langmuir probe signals in different conditions on the Tokamak à Configuration Variable.

This paper presents the current wall-embedded Langmuir probe system installed on the Tokamak à Configuration Variable (TCV), as well as the analysis tool chain used to interpret the current-voltage characteristic obtained when the probes are operated in swept-bias conditions. The analysis is based on a four-parameter fit combined with a minimum temperature approach. In order to reduce the effect of plasma fluctuations and measurement noise, several current-voltage characteristics are usually averaged before proceeding to the fitting. The impact of this procedure on the results is investigated, as well as the possible role of finite resistances in the circuitry, which could lead to an overestimation of the temperature. We study the application of the procedure in a specific regime, the plasma detachment, where results from other diagnostics indicate that the electron temperature derived from the Langmuir probes might be overestimated. To address this issue, we explore other fitting models and, in particular, an extension of the asymmetric double probe fit, which features effects of sheath expansion. We show that these models yield lower temperatures (up to approximately 60%) than the standard analysis in detached conditions, particularly for a temperature peak observed near the plasma strike point, but a discrepancy with other measurements remains. We explore a possible explanation for this observation, the presence of a fast electron population, and assess how robust the different methods are in such conditions.

Repair of a perforated sinus membrane with an autogenous periosteal graft: a study in 24 patients.

We describe a technique for repairing a perforation of the sinus membrane with a periosteal graft. Of 117 patients who had augmentation of the sinus floor, the sinus membrane perforated in 24, and these were repaired with autogenous periosteal grafts. Patients were followed up daily for the first 10days and monthly for the next six months, and clinical and radiographic variables were recorded. Patients had to be free of complications such as wound dehiscence, sinus infections, exposure of the graft, local inflammation, or pain. The radiographs showed correct osseointegration of all implants. Periosteal grafts are an effective alternative for repair of a perforation of the sinus membrane.

Comparing deregression methods for genomic prediction of test-day traits in dairy cattle.

We aimed to investigate the performance of three deregression methods (VanRaden, VR; Wiggans, WG; and Garrick, GR) of cows' and bulls' breeding values to be used as pseudophenotypes in the genomic evaluation of test-day dairy production traits. Three scenarios were considered within each deregression method: (i) including only animals with reliability of estimated breeding value (RELEBV ) higher than the average of parent reliability (RELPA ) in the training and validation populations; (ii) including only animals with RELEBV higher than 0.50 in the training and RELEBV higher than RELPA in the validation population; and (iii) including only animals with RELEBV higher than 0.50 in both training and validation populations. Individual random regression coefficients of lactation curves were predicted using the genomic best linear unbiased prediction (GBLUP), considering either unweighted or weighted residual variances based on effective records contributions. In summary, VR and WG deregression methods seemed more appropriate for genomic prediction of test-day traits without need for weighting in the genomic analysis, unless large differences in RELEBV between training population animals exist.

Cardiac morphofunctional characteristics of transgenic rats with overexpression of the bradykinin B1 receptor in the endothelium.

Our aim was to evaluate whether endothelial overexpressing of the bradykinin B1 receptor could be associated with altered left ventricular and myocardial performance. Echocardiography and hemodynamic were employed to assess left ventricular morphology and function in Sprague Dawley transgenic rats overexpressing the endothelial bradykinin B1 receptor (Tie2B1 rats). The myocardial inotropism was evaluated on papillary muscles contracting in vitro. In Tie2B1 animals, an enlarged left ventricular cavity and lower fractional shortening coupled with a lower rate of pressure change values indicated depressed left ventricular performance. Papillary muscle mechanics revealed that both Tie2B1 and wild-type rat groups had the same contractile capacities under basal conditions; however, in transgenic animals, there was accentuated inotropism due to post-pause potentiation. Following treatment with the Arg(9)-BK agonist, Tie2B1 papillary muscles displayed a reduction in myocardial inotropism. Endothelial B1 receptor overexpression has expanded the LV cavity and worsened its function. There was an exacerbated response of papillary muscle in vitro to a prolonged resting pause, and the use of a B1 receptor agonist impairs myocardial inotropism.

Cylindrospermopsin effects on cell viability and redox milieu of Neotropical fish Hoplias malabaricus hepatocytes.

Cylindrospermopsin (CYN) is a cyanotoxin that is cytotoxic to a wide variety of cells, particularly to the hepatocytes. In this study, the toxic effects of purified CYN were investigated in primary cultured hepatocytes of Neotropical fish Hoplias malabaricus. After isolation, attachment, and recovery for 72 h, the cells were exposed for 72 h to 0, 0.1, 1.0, 10, and 100 µg l-1 of CYN. Then, cell viability and a set of oxidative stress biomarker responses were determined. Catalase, superoxide dismutase, glucose-6-phosphate dehydrogenase, and glutathione S-transferase activities were not affected by exposure to CYN. Concentration-dependent decrease of glutathione reductase activity occurred for most CYN-exposed groups, whereas non-protein thiol content increased only for the highest CYN concentration. Lipid peroxidation, protein carbonylation, and DNA damage levels were not altered, but reactive oxygen species levels increased in the cells exposed to the highest concentration of CYN. Cell viability decreased in all the groups exposed to CYN. Thus, CYN may cause a slight change in redox balance, but it is not the main cause of cell death in H. malabaricus hepatocytes.

Genome scan for postmortem carcass traits in Nellore cattle.

Carcass traits measured after slaughter are economically relevant traits in beef cattle. In general, the slaughter house payment system is based on HCW. Ribeye area (REA) is associated with the amount of the meat in the carcass, and a minimum of backfat thickness (BFT) is necessary to protect the carcass during cooling. The aim of this study was to identify potential genomic regions harboring candidate genes affecting those traits in Nellore cattle. The data set used in the present study consisted of 1,756 Nellore males with phenotype records. A subset of 1,604 animals had both genotypic and phenotypic information. Genotypes were generated based on a panel with 777,962 SNPs from the Illumina Bovine HD chip. The SNP effects were calculated based on the genomic breeding values obtained by using the single-step GBLUP approach and a genomic matrix re-weighting procedure. The proportion of the variance explained by moving windows of 100 consecutive SNPs was used to assess potential genomic regions harboring genes with major effects on each trait. The top 10 non-overlapping SNP-windows explained 8.72%, 11.38%, and 9.31% of the genetic variance for REA, BFT, and HCW, respectively. These windows are located on chromosomes 5, 7, 8, 10, 12, 20, and 29 for REA; chromosomes 6, 8, 10, 13, 16, 17, 18, and 24 for BFT; and chromosomes 4, 6, 7, 8, 14, 16, 17, and 21 for HCW. For REA, there were identified genes ( and ) involved in the cell cycle biological process which affects many aspects of animal growth and development. The and genes, both from AA transporter family, was also associated with REA. The AA transporters are essential for cell growth and proliferation, acting as carriers of tissue nutrient supplies. Various genes identified for BFT (, , , , , and ) have been associated with lipid metabolism in different mammal species. One of the most promising genes identified for HCW was the . There is evidence, in the literature, that this gene is located in putative QTL affecting carcass weight in beef cattle. Our results showed several genomic regions containing plausible candidate genes that may be associated with carcass traits in Nellore cattle. Besides contributing to a better understanding of the genetic control of carcass traits, the identified genes can also be helpful for further functional genomic studies.

Genetic parameter estimates for carcass traits and visual scores including or not genomic information.

The objective of this study was to determine whether visual scores used as selection criteria in Nellore breeding programs are effective indicators of carcass traits measured after slaughter. Additionally, this study evaluated the effect of different structures of the relationship matrix ( and ) on the estimation of genetic parameters and on the prediction accuracy of breeding values. There were 13,524 animals for visual scores of conformation (CS), finishing precocity (FP), and muscling (MS) and 1,753, 1,747, and 1,564 for LM area (LMA), backfat thickness (BF), and HCW, respectively. Of these, 1,566 animals were genotyped using a high-density panel containing 777,962 SNP. Six analyses were performed using multitrait animal models, each including the 3 visual scores and 1 carcass trait. For the visual scores, the model included direct additive genetic and residual random effects and the fixed effects of contemporary group (defined by year of birth, management group at yearling, and farm) and the linear effect of age of animal at yearling. The same model was used for the carcass traits, replacing the effect of age of animal at yearling with the linear effect of age of animal at slaughter. The variance and covariance components were estimated by the REML method in analyses using the numerator relationship matrix () or combining the genomic and the numerator relationship matrices (). The heritability estimates for the visual scores obtained with the 2 methods were similar and of moderate magnitude (0.23-0.34), indicating that these traits should response to direct selection. The heritabilities for LMA, BF, and HCW were 0.13, 0.07, and 0.17, respectively, using matrix and 0.29, 0.16, and 0.23, respectively, using matrix . The genetic correlations between the visual scores and carcass traits were positive, and higher correlations were generally obtained when matrix was used. Considering the difficulties and cost of measuring carcass traits postmortem, visual scores of CS, FP, and MS could be used as selection criteria to improve HCW, BF, and LMA. The use of genomic information permitted the detection of greater additive genetic variability for LMA and BF. For HCW, the high magnitude of the genetic correlations with visual scores was probably sufficient to recover genetic variability. The methods provided similar breeding value accuracies, especially for the visual scores.

Genotype × environment interaction for age at first calving, scrotal circumference, and yearling weight in Nellore cattle using reaction norms in multitrait random regression models.

The aim of this study was to evaluate the effect of genotype × environment interaction (G×E) on age at first calving (AFC), scrotal circumference (SC), and yearling weight (YW) and to estimate genetic correlations between these traits in Nellore cattle using reaction norms in multitrait random regression models. In this study, 28,871, 41,386, and 89,152 records of Nellore cattle for AFC, SC, and YW, respectively, were used. The data were obtained from farms located in the north, northeast, midwest, and southeast regions of Brazil that participate in the DeltaGen Breeding Program. Environmental levels were defined as a function of contemporary groups, that is, animals born in the same herd and year, from the same management group (from birth to yearling), and of the same sex. Postweaning weight gain was used as a criterion to evaluate the environmental conditions for all traits. For reaction norm analyses, residual variances were modeled with homogeneous and heterogeneous classes. The model for SC and YW included the fixed effects of contemporary group and age of the animal as a covariate as well as random direct additive genetic and residual effects. The same model, excluding the covariate age of the animal, was used for AFC. The heritability estimates were low to high for AFC (0.09 to 0.50), high for SC (0.51 to 0.67), and moderate to high for YW (0.33 to 0.71). The genetic correlations (within each trait) along the environmental levels varied from -0.27 to 1.0 for AFC, from 0.73 to 1.0 for SC, and from 0.26 to 1.0 for YW. The genetic correlations between different traits in different environments varied from -0.14 to -0.60 between AFC and SC, from -0.05 to -0.32 between AFC and YW, and from -0.05 to 0.72 between YW and SC. The genetic correlations have had different magnitudes for AFC, SC, and YW, which could indicate the presence of G×E. The present results should support researchers and farmers in defining selection criteria to improve growth traits and sexual precocity. Our results suggest that animals for breeding have to be selected in the same environment and management conditions as their progeny will be reared.

Genetic association of growth traits with carcass and meat traits in Nellore cattle.

The aim of this study was to estimate genetic and phenotypic associations of growth traits with carcass and meat traits in Nellore cattle. Data from male and female animals were used for weaning weight (WW; N = 241,416), yearling weight (YW, N = 126,596), weight gain from weaning to yearling (GWY, N = 78,687), and yearling hip height (YHH, N = 90,720), respectively; 877 male animals were used for hot carcass weight (HCW) and 884 for longissimus muscle area (LMA), backfat thickness (BT), marbling score (MS), and shear force (SF). The variance components were estimated by the restricted maximum likelihood method using three-trait animal models that included WW. The model for WW included direct and maternal additive genetic, maternal permanent environmental, and residual effects as random effects; contemporary group as fixed effects; and age of dam at calving and age of animal as covariates (linear and quadratic effects). For the other traits, maternal effects and the effect of age of dam at calving were excluded from the model. Heritability ranged from 0.10 ± 0.12 (LMA) to 0.44 ± 0.007 (YW). Genetic correlations ranged from -0.40 ± 0.38 (WW x LMA) to 0.55 ± 0.10 (HCW x YW). Growth, carcass, and meat traits have sufficient genetic variability to be included as selection criteria in animal breeding programs.

Prospection of genomic regions divergently selected in racing line of Quarter Horses in relation to cutting line.

Selection of Quarter Horses for different purposes has led to the formation of lines, including racing and cutting horses. The objective of this study was to identify genomic regions divergently selected in racing line of Quarter Horses in relation to cutting line applying relative extended haplotype homozygosity (REHH) analysis, an extension of extended haplotype homozygosity (EHH) analysis, and the fixation index (F ST) statistic. A total of 188 horses of both sexes, born between 1985 and 2009 and registered at the Brazilian Association of Quarter Horse Breeders, including 120 of the racing line and 68 of the cutting line, were genotyped using single nucleotide polymorphism arrays. On the basis of 27 genomic regions identified as selection signatures by REHH and F ST statistics, functional annotations of genes were made in order to identify those that could have been important during formation of the racing line and that could be used subsequently for the development of selection tools. Genes involved in muscle growth (n=8), skeletal growth (n=10), muscle energy metabolism (n=15), cardiovascular system (n=14) and nervous system (n=23) were identified, including the FKTN, INSR, GYS1, CLCN1, MYLK, SYK, ANG, CNTFR and HTR2B.

Kolmogorov-Zakharov spectrum in AdS gravitational collapse.

We study black hole formation during the gravitational collapse of a massless scalar field in asymptotically D-dimensional anti-de Sitter AdS(D) spacetimes for D = 4, 5. We conclude that spherically symmetric gravitational collapse in asymptotically AdS spaces is turbulent and characterized by a Kolmogorov-Zakharov spectrum. Namely, we find that after an initial period of weakly nonlinear evolution, there is a regime where the power spectrum of the Ricci scalar evolves as ω(-s) with the frequency, ω, and s ≈ 1.7 ± 0.1.

Gene expression study related with the intrinsic pathway of apoptosis in bladder cancer by real-time PCR technique.

We examined the expression of anti-apoptotic genes (XIAP and Bcl-2) and apoptotic genes (cytochrome c, caspase-9, Apaf-1) in tissue samples of patients with superficial bladder cancer. Thirty-two bladder cancer tissue samples (8 papillary urothelial neoplasm of low malignant potential, 10 low-grade, and 14 high-grade) and 8 normal bladder tissue samples from necropsy were used for the study of gene expression by real-time PCR analysis. Analysis of the expression of apoptotic gene constituents of an apoptosome demonstrated an increase in Apaf-1 expression in the three tumor grades when compared with the control (P < 0.01, P < 0.05, and P < 0.01), low expression of caspase-9 in all groups (P < 0.05), and an increase in cytochrome c expression in all tumor grades in relation to the control, although without statistically significant difference. The expression of anti-apoptotic genes revealed an increase in XIAP expression in all tumor grades in relation to the control, although without statistically significant difference, and low expression of Bcl-2 in all tumor grades and the control (P < 0.05). The results proved that there is low evidence of apoptotic activity by the intrinsic pathway, demonstrated by the low expression of caspase-9 and considerable increase in XIAP expression, which may render these genes potential therapeutic targets in bladder cancer treatment.

Inhibition of NF- κ B by Dehydroxymethylepoxyquinomicin Suppresses Invasion and Synergistically Potentiates Temozolomide and γ -Radiation Cytotoxicity in Glioblastoma Cells.

Despite advances in neurosurgery and aggressive treatment with temozolomide (TMZ) and radiation, the overall survival of patients with glioblastoma (GBM) remains poor. Vast evidence has indicated that the nuclear factor NF- κ B is constitutively activated in cancer cells, playing key roles in growth and survival. Recently, Dehydroxymethylepoxyquinomicin (DHMEQ) has shown to be a selective NF- κ B inhibitor with antiproliferative properties in GBM. In the present study, the ability of DHMEQ to surmount tumor's invasive nature and therapy resistance were further explored. Corroborating results showed that DHMEQ impaired cell growth in dose- and time-dependent manners with G2/M arrest when compared with control. Clonogenicity was also significantly diminished with increased apoptosis, though necrotic cell death was also observed at comparable levels. Notably, migration and invasion were inhibited accordingly with lowered expression of invasion-related genes. Moreover, concurrent combination with TMZ synergistically inhibited cell growth in all cell lines, as determined by proliferation and caspase-3 activation assays, though in those that express O(6)-methylguanine-DNA methyltransferase, the synergistic effects were schedule dependent. Pretreatment with DHMEQ equally sensitized cells to ionizing radiation. Taken together, our results strengthen the potential usefulness of DHMEQ in future therapeutic strategies for tumors that do not respond to conventional approaches.