Mapping Cell Membrane Organization and Dynamics Using Soft Nanoimprint Lithography.

Membrane shape is a key feature of many cellular processes, including cell differentiation, division, migration, and trafficking. The development of nanostructured surfaces allowing for the in situ manipulation of membranes in living cells is crucial to understand these processes, but this requires complicated and limited-access technologies. Here, we investigate the self-organization of cellular membranes by using a customizable and benchtop method allowing one to engineer 1D SiO2 nanopillar arrays of defined sizes and shapes on high-performance glass compatible with advanced microscopies. As a result of this original combination, we provide a mapping of the morphology-induced modulation of the cell membrane mechanics, dynamics and steady-state organization of key protein complexes implicated in cellular trafficking and signal transduction.

Non-traumatic pneumocephalus caused by increased depth of olfactory fossa.

We report a case of unilateral Keros type III variant of the cribriform plate (olfactory fossa >7 mm deep) that caused non-traumatic pneumocephalus. A 61-year-old male patient presented to the emergency room complaining of acute-onset headache after blowing his nose. Computed tomographic (CT) examination showed a massive pneumocephalus; a CT scan from three months before showed a Keros type III variant. The defect was repaired endoscopically with mucoperichondrial and mucoperiostal grafts. Pneumocephalus that has developed in a Keros type III variant has been theorised about, but never reported to our knowledge. Radiologists should be familiar with the Keros classification so that they can identify patients who are at increased risk of fractures of the cribriform plate.

High-reflectance magnetron-sputtered scandium-based x-ray multilayer mirrors for the water window.

We present an experimental comparison of several Sc-based short period multilayer mirrors including Cr/Sc with B4C barrier layers and CrNx/Sc, and we propose a new material combination that provides high reflectance in the water window domain. Multilayer samples with period thickness in the range 1.5-1.7 nm have been deposited by magnetron sputtering and characterized by x-ray reflectometry with a Cu-Kα source and with synchrotron radiation near the Sc-L2,3 edge. Best results are achieved by combining the nitridation of Cr layers and the addition of B4C barrier layers. Near normal incidence reflectance as high as 23% has been measured at photon energy of 397 eV. A simulation model of the multilayer structure is proposed and it predicts that reflectance higher than 32% is achievable with CrNx/B4C/Sc mirrors.

SUMOylation of the inducible (c-Fos:c-Jun)/AP-1 transcription complex occurs on target promoters to limit transcriptional activation.

The inducible proto-oncogenic (c-Fos:c-Jun)/AP-1 transcription complex binds 12-O-tetradecanoylphorbol 13-acetate (TPA)-responsive elements (TRE) in its target genes. It is tightly controlled at multiple levels to avoid the deleterious effects of its inappropriate activation. In particular, SUMOylation represses its transactivation capacity in transient reporter assays using constitutively expressed proteins. This led to the presumption that (c-Fos:c-Jun)/AP-1 SUMOylation would be required to turn-off transcription of its target genes, as proposed for various transcription factors. Instead, thanks to the generation of an antibody specific for SUMO-modified c-Fos, we provide here direct evidence that SUMOylated c-Fos is present on a stably integrated reporter TPA-inducible promoter at the onset of transcriptional activation and colocalizes with RNA polymerase II within chromatin. Interestingly, (c-Fos:c-Jun)/AP-1 SUMOylation limits reporter gene induction, as well as the appearance of active transcription-specific histone marks on its promoter. Moreover, non-SUMOylatable mutant (c-Fos:c-Jun)/AP-1 dimers accumulate to higher levels on their target promoter, suggesting that SUMOylation might facilitate the release of (c-Fos:c-Jun)/AP-1 from promoters. Finally, activation of GADD153, an AP-1 target gene, is also associated with a rapid increase in SUMOylation at the level of its TRE and c-Fos SUMOylation dampens its induction by TPA. Taken together, our data suggest that SUMOylation could serve to buffer transcriptional activation of AP-1 target genes.

How to focus an attosecond pulse.

Attosecond experiments involving focusing of attosecond light pulses can suffer from a spread of the attosecond radiation both in space and time due to optical aberrations. We present a detailed numerical study of the distortions induced in the most common focusing geometries that make use of parabolic, spherical, toroidal and ellipsoidal mirrors. We deduce the consequences on the pulse duration and possible issues that could arise in applications of attosecond pulses. This should serve as a guideline for setting up attosecond focusing optics.

Intention-based EMG control for powered exoskeletons.

Electromyographical (EMG) signals have been frequently used to estimate human muscular torques. In the field of human-assistive robotics, these methods provide valuable information to provide effectively support to the user. However, their usability is strongly limited by the necessity of complex user-dependent and session-dependent calibration procedures, which confine their use to the laboratory environment. Nonetheless, an accurate estimate of muscle torque could be unnecessary to provide effective movement assistance to users. The natural ability of human central nervous system of adapting to external disturbances could compensate for a lower accuracy of the torque provided by the robot and maintain the movement accuracy unaltered, while the effort is reduced. In order to explore this possibility, in this paper we study the reaction of ten healthy subjects to the assistance provided through a proportional EMG control applied by an elbow powered exoskeleton. This system gives only a rough estimate of the user muscular torque but does not require any specific calibration. Experimental results clearly show that subjects adapt almost instantaneously to the assistance provided by the robot and can reduce their effort while keeping full control of the movement under different dynamic conditions (i.e., no alterations of movement accuracy are observed).

Development of gait segmentation methods for wearable foot pressure sensors.

We present an automated segmentation method based on the analysis of plantar pressure signals recorded from two synchronized wireless foot insoles. Given the strict limits on computational power and power consumption typical of wearable electronic components, our aim is to investigate the capability of a Hidden Markov Model machine-learning method, to detect gait phases with different levels of complexity in the processing of the wearable pressure sensors signals. Therefore three different datasets are developed: raw voltage values, calibrated sensor signals and a calibrated estimation of total ground reaction force and position of the plantar center of pressure. The method is tested on a pool of 5 healthy subjects, through a leave-one-out cross validation. The results show high classification performances achieved using estimated biomechanical variables, being on average the 96%. Calibrated signals and raw voltage values show higher delays and dispersions in phase transition detection, suggesting a lower reliability for online applications.

Duration of ultrashort pulses in the presence of spatio-temporal coupling.

We report on a simple method allowing one to decompose the duration of arbitrary ultrashort light pulses, potentially distorted by space-time coupling, into four elementary durations. Such a decomposition shows that, in linear optics, a spatio-temporal pulse can be stretched with respect to its Fourier limit by only three independent phenomena: nonlinear frequency dependence of the spectral phase over the whole spatial extent of the pulse, spectral amplitude inhomogeneities in space, and spectral phase inhomogeneities in space. We illustrate such a decomposition using numerical simulations of complex spatio-temporal femtosecond and attosecond pulses. Finally we show that the contribution of two of these three effects to the pulse duration is measurable without any spectral phase characterization.

Temporal coherence and spectral linewidth of an injection-seeded transient collisional soft x-ray laser.

The temporal coherence of an injection-seeded transient 18.9 nm molybdenum soft x-ray laser was measured using a wavefront division interferometer and compared to model simulations. The seeded laser is found to have a coherence time similar to that of the unseeded amplifier, ~1 ps, but a significantly larger degree of temporal coherence. The measured coherence time for the unseeded amplifier is only a small fraction of the pulsewidth, while in the case of the seeded laser it approaches full temporal coherence. The measurements confirm that the bandwidth of the solid target amplifiers is significantly wider than that of soft x-ray lasers that use gaseous targets, an advantage for the development of sub-picosecond soft x-ray lasers.

Control of the attosecond synchronization of XUV radiation with phase-optimized mirrors.

We report on the advanced amplitude and phase control of attosecond radiation allowed by specifically-designed multilayer XUV mirrors. We first demonstrate that such mirrors can compensate for the intrinsic chirp of the attosecond emission over a large bandwidth of more than 20 eV. We then show that their combination with metallic foils introduces a third-order dispersion that is adjustable through the mirror's incidence angle. This results in a controllable beating allowing the radiation to be shaped from a single to a series of sub-100 as pulses.

An international survey of oral medicine practice: proceedings from the 5th World Workshop in Oral Medicine.

OBJECTIVES: (i) To define the current state of oral medicine clinical practice internationally, and (ii) to make recommendations for future modeling of the practice of oral medicine. MATERIALS AND METHODS: A survey was designed by an international panel of oral medicine experts to assess the current state of oral medicine practice internationally. The survey was sent to oral medicine experts across the world, and responses were electronically stored and analyzed using descriptive statistics. RESULTS: Two hundred respondents completed the survey representing 40 countries from six continents. The two most common settings for an oral medicine practice were in a hospital and a dental school. More than 88% of respondents considered management of oral mucosal disease, salivary dysfunction, oral manifestations of systemic diseases, and facial pain in the definition of oral medicine. CONCLUSIONS: (i) Oral medicine clinicians diagnose and manage a wide variety of orofacial conditions; (ii) There are significant differences in the definition of oral medicine clinical practice from country to country; (iii) India has the largest expansion of oral medicine services as defined by escalating numbers of clinicians within the specialty as compared with other countries; (iv) oral medicine practitioners have a wide range of professional responsibilities.

Proportional EMG control for upper-limb powered exoskeletons.

Electromyography (EMG) has been frequently proposed as the driving signal for controlling powered exoskeletons. Lot of effort has been spent to design accurate algorithms for muscular torque estimation, while very few studies attempted to understand to what extent an accurate torque estimate is indeed necessary to provide effective movement assistance through powered exoskeletons. In this study, we focus on the latter aspect by using a simple and "low-accuracy" torque estimate, an EMG-proportional control, to provide assistance through an elbow exoskeleton. Preliminary results show that subjects adapt almost instantaneously to the assistance provided by the exoskeleton and can reduce their effort while keeping full control of the movement.

Development of an in-shoe pressure-sensitive device for gait analysis.

In this work, we present the development of an in-shoe device to monitor plantar pressure distribution for gait analysis. The device consists in a matrix of 64 sensitive elements, integrated with in-shoe electronics and battery which provide an high-frequency data acquisition, wireless transmission and an average autonomy of 7 hours in continuous working mode. The device is presented along with its experimental characterization and a preliminary validation on a healthy subject.

Soft artificial tactile sensors for the measurement of human-robot interaction in the rehabilitation of the lower limb.

A new and alternative method to measure the interaction force between the user and a lower-limb gait rehabilitation exoskeleton is presented. Instead of using a load cell to measure the resulting interaction force, we propose a distributed measure of the normal interaction pressure over the whole contact area between the user and the machine. To obtain this measurement, a soft silicone tactile sensor is inserted between the limb and commonly used connection cuffs. The advantage of this approach is that it allows for a distributed measure of the interaction pressure, which could be useful for rehabilitation therapy assessment purposes, or for control. Moreover, the proposed solution does not change the comfort of the interaction; can be applied to connection cuffs of different shapes and sizes; and can be manufactured at a low cost. Preliminary results during gait assistance tasks show that this approach can precisely detect changes in the pressure distribution during a gait cycle.

Fourier-limited seeded soft x-ray laser pulse.

We present what we believe to be the first measurement of the spectral properties of a soft x-ray laser seeded by a high-order harmonic beam. Using an interferometric method, the spectral profile of a seeded Ni-like krypton soft x-ray laser (32.8 nm) generated by optical field ionization has been experimentally determined, and the shortest possible pulse duration has been deduced. The source exhibits a Voigt spectral profile with an FWHM of 3.1+/-0.3 mA, leading to a Fourier-transform pulse duration of 4.7 ps. This value is comparable with the upper limit of the soft x-ray pulse duration determined by experimentally investigating the gain dynamics, from which we conclude that the source has reached the Fourier limit. The measured bandwidth is in good agreement with the predictions of a radiative transfer code, including gain line narrowing and saturation rebroadening.

Optimization toward a high-average-brightness soft-x-ray laser pumped at grazing incidence.

We report the near-field imaging characterization of a 10 Hz Ni-like 18.9 nm molybdenum soft-x-ray laser pumped in a grazing incidence pumping (GRIP) geometry with a table-top laser driver. We investigate the effect of varying the GRIP angle on the spatial behavior of the soft-x-ray laser source. After multiparameter optimization, we were able to find conditions to generate routinely a high-repetition-rate soft-x-ray laser with an energy level of up to 3 microJ/pulse and to 6x10(17) photons/s/mm2/mrad2/(0.1% bandwidth) average brightness and 1x10(28) photons/s/mm2/mrad2/(0.1% bandwidth) peak brightness.

Quantitative study of 10 Hz operation of a soft x-ray laser-energy stability and target considerations.

A soft x-ray laser from Ni-like Mo, pumped in grazing incidence (GRIP), is analyzed with regard to high repetition rate operation. Reliable lasing is obtained, but with significant energy fluctuations attributed mainly to beam pointing jitter from the pump laser. Two modes of operation are compared: continuously moving target and stationary target. With a moving target the soft X-ray output is constant on average, whereas the repeated use of the same target position leads to a pulse energy which increases for several tens of shots. This effect might be caused by improved guiding of the pump laser in the formed groove and the removal, through laser ablation, of the oxide layer on the target surface.

Nasal mucosal headache presenting as orofacial pain: a review of the literature and a case report.

Headaches are a significant component of many facial pain syndromes. These facial pain/headache syndromes often have various etiologies, including neurologic, vascular, musculoskeletal, or combinations of vascular/musculoskeletal origins. Referred rhinologic headache, however, can be overlooked as a cause of facial pain in the dental literature. We report a case of nasal mucosal headache that presented as facial pain and include a review of the literature.

A review of burning mouth syndrome.

Burning mouth syndrome is a complicated, poorly understood, predominantly oral condition that affects more than 1 million people in the United States. Women are particularly affected by the condition; they are diagnosed with symptoms seven times more frequently than males. Burning mouth syndrome is characterized by a burning, painful sensation of the oral mucosa that most commonly involves the anterior tongue. Many precipitating factors to burning mouth syndrome have been proposed, and treatment addressing these factors has had limited success. Patients with burning mouth syndrome are more likely to be evaluated by physicians, and therefore it is advantageous for the physician to be familiar with this oral condition. This paper reviews burning mouth syndrome, associated causative factors, and treatment strategies for the physician.

Intraoral contact allergy: a literature review and case reports.

Signs and symptoms of contact allergic reactions affecting the oral mucosa may mimic other common oral disorders, making diagnosis difficult. Patients frequently seek multiple consultations and do not receive the correct diagnosis or effective management. As intraoral contact allergy may be more prevalent than previously believed, a review of this topic is warranted. This article emphasizes signs and symptoms that suggest intraoral contact allergy, and the authors discuss the allergens that most frequently affect the oral mucosa.