ABSTRACT
BACKGROUND: Growing research on lignin depolymerization to functionalized bio-aromatics has necessitated dedicated analysis techniques. However, immense variability in molecular weight and functional groups of the depolymerization products impedes fast analysis of a large number of samples while remaining in-depth enough for catalyst screening or reaction condition optimization. While GPC-HPLC-UV/VIS has been a promising technique, up until now, the information it provides is largely qualitative. By enabling quantification of key monomeric products and through further reduction of overall analysis time, this study aims to increase the potential of GPC-HPLC-UV/VIS for fast and in-depth characterization of lignin depolymerization product pools. RESULTS: Analysis of selected samples, isolated from GPC-HPLC-UV/VIS analyses of lignin depolymerization product pools, with gas chromatography (GC) equipped with an Orbitrap high-resolution accurate mass spectrometer (Orbitrap-HR/AM-MS) is successful in identifying the main low monomeric products. Moreover, these identifications are further substantiated through GPC-HPLC-UV/VIS analysis of standards. Furthermore, straight forward quantification of these products directly within GPC-HPLC-UV/VIS is successfully developed with limits of detection ≤0.05 mmol/L, which is at least on par with more complex analysis techniques. Additionally, several different reversed phase columns are assessed to reduce 2nd dimension (2D) time and, hence, overall analysis time while maintaining the possibility for quantification. A reduction in overall analysis time of about 30% as compared to the state-of-the-art is achieved by using a YMC Triart BIO C4 column as 2D. SIGNIFICANCE: Through the enhancements introduced in this study, GPC-HPLC-UV/VIS emerges as a unique technique for the analysis of lignin depolymerization product pools, which is capable of fast yet sufficiently in-depth analysis of a large volume of samples. This capability is indispensable for catalyst screening and fine-tuning reaction conditions.
ABSTRACT
Lignin valorization and particularly its depolymerization into bio-aromatics, has emerged as an important research topic within green chemistry. However, screening of catalysts and reaction conditions within this field is strongly constrained by the lack of analytical techniques that allow for fast and detailed mapping of the product pools. This analytical gap results from the inherent product pool complexity and the focus of the state-of-the-art on monomers and dimers, overlooking the larger oligomers. In this work, this gap is bridged through the development of a quasi-orthogonal GPC-HPLC-UV/VIS method that is able to separate the bio-aromatics according to molecular weight (hydrodynamic volume) and polarity. The method is evaluated using model compounds and real lignin depolymerization samples. The resulting color plots provide a powerful graphical tool to rapidly assess differences in reaction selectivity towards monomers and dimers as well as to identify differences in the oligomers.
ABSTRACT
Monometallic cerium layered double hydroxides (Ce-LDH) supports were successfully synthesized by a homogeneous alkalization route driven by hexamethylenetetramine (HMT). The formation of the Ce-LDH was confirmed and its structural and compositional properties studied by XRD, SEM, XPS, iodometric analyses and TGA. HT-XRD, N2-sorption and XRF analyses revealed that by increasing the calcination temperature from 200 to 800 °C, the Ce-LDH material transforms to ceria (CeO2) in four distinct phases, i.e., the loss of intramolecular water, dehydroxylation, removal of nitrate groups and removal of sulfate groups. When loaded with 2.5 wt% palladium (Pd) and 2.5 wt% nickel (Ni) and calcined at 500 °C, the PdNi-Ce-LDH-derived catalysts strongly outperform the PdNi-CeO2 benchmark catalyst in terms of conversion as well as selectivity for the hydrogenolysis of benzyl phenyl ether (BPE), a model compound for the α-O-4 ether linkage in lignin. The PdNi-Ce-LDH catalysts showed full selectivity towards phenol and toluene while the PdNi-CeO2 catalysts showed additional oxidation of toluene to benzoic acid. The highest BPE conversion was observed with the PdNi-Ce-LDH catalyst calcined at 600 °C, which could be related to an optimum in morphological and compositional characteristics of the support.
