Size Exclusion and Ion Exchange Chromatographic Hardware Modified with a Hydrophilic Hybrid Surface.

Certain biomolecules have proven to be difficult to analyze by liquid chromatography (LC), especially under certain chromatographic conditions. The separation of proteins in aqueous mobile phases is one such example because there is the potential for both hydrophobic and ionic secondary interactions to occur with chromatographic hardware to the detriment of peak recovery, peak shape, and the overall sensitivity of the LC analysis. To decrease non-specific adsorption and undesired secondary interactions between column hardware and biomolecules, we have developed and applied a new hydrophilically modified hybrid surface (h-HST) for size exclusion chromatography (SEC) and anion exchange (AEX) separations of proteins and nucleic acids. This surface incorporates additional oxygen and carbon atoms onto an ethylene bridge hybrid siloxane polymer. As a result, it exhibits reduced electrostatic properties and hydrophilicity that facilitates challenging aqueous separations. Flow injection tests with a phosphate buffer showed superior protein recovery from an h-HST frit when compared to unmodified ethylene-bridged hybrid HST, titanium, stainless steel, and PEEK frits. When applied to SEC of rituximab, ramucirumab, and trastuzumab emtansine with a 50 mM ammonium acetate buffer, this new hydrophilic chromatographic hardware yielded improved monomer and aggregate recovery, higher plate numbers, and more symmetrical peaks. AEX columns also benefited from h-HST hardware. An acidic mAb (eculizumab) showed improved recovery, more stable retention, and a sharper peak when eluted from an h-HST versus SS column. Moreover, AEX separations of intact mRNA samples (Cas9 and EPO mRNA) were improved, where it was seen that h-HST column hardware provided higher sensitivity and more repeatable peak areas from injection to injection. As such, there is significant potential in the use of h-HST chromatographic hardware to facilitate more robust and more sensitive analyses for a multitude of challenging separations and analytes.

Optimizing test approaches for the detection of exposed metal surfaces within a chromatographic flow path.

It is critical to the success of any chromatography-based assay that the performance of the LC instrument be checked for its readiness and ability to perform the intended analysis. This includes gaging the suitability of a system to fulfill the purpose of different types of methods. One type of analysis that requires special consideration is the analysis of compounds which are prone to a particular form of non-specific binding, namely metal adsorption, where analytes interact and potentially adsorb to metal contained within the chromatographic flow path. For an analysis of compounds which are susceptible to metal adsorption, ideally a system suitability test would be performed to ensure there will not be any sample loss or detrimental peak shape effects resulting from potential analyte-to-metal interactions. To help chromatographers assess system inertness concerns like this, we have developed a method of testing LC systems for metal interactions using adenosine 5'-(α,ß-methylene)diphosphate (AMPcP). This nucleotide analog has been confirmed to have a propensity to adsorb to titanium and stainless-steel frits and is resistant to hydrolysis and stable to long-term storage and repeat use (as is befitting of any reagent proposed for system suitability testing). AMPcP has been used in a flow injection test (no column in-line) to monitor for losses in recovery and peak shape perturbations that can potentially be present in any chromatography system manufactured with one or more metal based components. In this approach, sequential injections of AMPcP were made without a column and various peak attributes were monitored and ultimately correlated to the amount of metal surface area in the flow path. The ability of this method to discriminate between inert chromatographic surfaces versus exposed metal surfaces was verified by comparing peak areas, peak shapes, and injection repeatability for AMPcP using a UHPLC equipped with MP35N metal alloy components versus an equivalent UHPLC equipped with an ethylene bridged hybrid organic-inorganic surface (or so-called hybrid surface technology). Injections of caffeine were also explored to establish a negative control for this system suitability measurement. Caffeine does not interact with metal surfaces and can therefore give an instrument specific representation of peak shape and dispersion as well as an indication of overall mechanical system performance. Additionally, replicate injections of AMPcP and caffeine onto a UHPLC partially configured with hybrid surface technology (HST) readily identified exposed metal surfaces through an increased peak area relative standard deviation as well as a reduction in absolute recovery. Finally, a novel visualization tool was developed to provide an alternative method of determining system inertness without having to perform chromatographic calculations but instead a graphical peak shape comparison between a negative control, caffeine, and the metal sensitive AMPcP test probe.

Mitigation of analyte loss on metal surfaces in liquid chromatography.

The adsorptive loss of acidic analytes in liquid chromatography was investigated using metal frits. Repetitive injections of acidic small molecules or an oligonucleotide were made on individual 2.1 or 4.6 mm i.d. column frits. Losses were observed for adenosine 5'-(α,ß-methylene) diphosphate, 2-pyridinol 1-oxide and the 25-mer phosphorothioate oligonucleotide Trecovirsen (GEM91) on stainless steel and titanium frits. Analyte adsorption was greatest at acidic pH due to the positive charge on the metal oxide surface. Analyte recovery increased when a series of injections was performed; this effect is known as sample conditioning. Nearly complete recovery was achieved when the metal adsorptive sites were saturated with the analyte. A similar effect was achieved by conditioning the frits with phosphoric, citric or etidronic acids, or their buffered solutions. These procedures can be utilized to mitigate analyte loss. However, the effect is temporary, as the conditioning agent is gradually removed by the running mobile phase. Metal frits modified with hybrid organic/inorganic surface technology were shown to mitigate analyte-to-metal surface interactions and improve recovery of acidic analytes. Quantitative recovery of a 15-35 mer oligodeoxythymidine mixture was achieved using column hardware modified with hybrid surface technology, without a need for column conditioning prior to analysis.

Using Hybrid Organic-Inorganic Surface Technology to Mitigate Analyte Interactions with Metal Surfaces in UHPLC.

Interactions of analytes with metal surfaces in high-performance liquid chromatography (HPLC) instruments and columns have been reported to cause deleterious effects ranging from peak tailing to a complete loss of the analyte signal. These effects are due to the adsorption of certain analytes on the metal oxide layer on the surface of the metal components. We have developed a novel surface modification technology and applied it to the metal components in ultra-HPLC (UHPLC) instruments and columns to mitigate these interactions. A hybrid organic-inorganic surface, based on an ethylene-bridged siloxane chemistry, was developed for use with reversed-phase and hydrophilic interaction chromatography. We have characterized the performance of UHPLC instruments and columns that incorporate this surface technology and compared the results with those obtained using their conventional counterparts. We demonstrate improved performance when using the hybrid surface technology for separations of nucleotides, a phosphopeptide, and an oligonucleotide. The hybrid surface technology was found to result in higher and more consistent analyte peak areas and improved peak shape, particularly when using low analyte mass loads and acidic mobile phases. Reduced abundances of iron adducts in the mass spectrum of a peptide were also observed when using UHPLC systems and columns that incorporate hybrid surface technology. These results suggest that this technology will be particularly beneficial in UHPLC/mass spectrometry investigations of metal-sensitive analytes.