Effect of temperature on structural, dynamical, and electronic properties of Sc2Te3 from first-principles calculations.

The compounds Sc2Te3 and Sb2Te3 have the same crystal structure. Ge-Sb-Te alloys are also the most common prototype phase change memory (PCM) compounds in the GeTe-Sb2Te3 pseudo-binary combination. Recently, alloying Sc atoms into Sb2Te3 has enabled sub-nanosecond switching in large conventional phase-change random access memory (PCRAM) devices. However, prior study on the electronic structure and dynamic properties of the Sc2Te3 system is very limited. In this work, we investigate the effect of temperature on the structural, dynamic, and electronic properties of the Sc2Te3 compound through ab initio molecular dynamics simulations. We show that the distorted-octahedral clusters are connected by four-fold rings even at higher temperatures. Moreover, our results clearly illustrate a liquid-to-glass transition temperature, which is between approximately 773 K and 950 K. The effect of temperature changes on the electronic properties of the system manifests as a metal-to-semiconductor transition. The band gap obtained using the mBJLDA functional is twice the value obtained using the PBE functional. Our studies provide useful insight into the local structure and dynamic and electronic properties of the Sc2Te3 system at the atomic level. We hope that this work could stimulate more theoretical work on the development of cache-type phase-change memory and broaden its application in the field of PCM.

Polymorphic Ga2S3 nanowires: phase-controlled growth and crystal structure calculations.

The polymorphism of nanostructures is of paramount importance for many promising applications in high-performance nanodevices. We report the chemical vapor deposition synthesis of Ga2S3 nanowires (NWs) that show the consecutive phase transitions of monoclinic (M) → hexagonal (H) → wurtzite (W) → zinc blende (C) when lowering the growth temperature from 850 to 600 °C. At the highest temperature, single-crystalline NWs were grown in the thermodynamically stable M phase. Two types of H phase exhibited 1.8 nm periodic superlattice structures owing to the distinctively ordered Ga sites. They consisted of three rotational variants of the M phase along the growth direction ([001]M = [0001]H/W) but with different sequences in the variants. The phases shared the same crystallographic axis within the NWs, producing novel core-shell structures to illustrate the phase evolution. The relative stabilities of these phases were predicted using density functional theory calculations, and the results support the successive phase evolution. Photodetector devices based on the p-type M and H phase Ga2S3 NWs showed excellent UV photoresponse performance.

Polytypic Phase Transition of Nb1-xVxSe2 via Colloidal Synthesis and Their Catalytic Activity toward Hydrogen Evolution Reaction.

Polytypes of two-dimensional transition metal dichalcogenide can extend the architecture and application of nanostructures. Herein, Nb1-xVxSe2 alloy nanosheets in the full composition range (x) were synthesized by a colloidal reaction. At x = 0.1-0.3, a phase transition occurred from various hexagonal (three 2H and one 4H types) phase NbSe2 to an atomically homogeneous 1T phase VSe2. Density functional theory calculations also revealed a polytypic phase transition at x = 0.3, which was shifted close to 0 in the presence of Se vacancies. Furthermore, the calculations validate favorable formation of Se vacancies at the phase transition. The sample at x = 0.3 exhibited enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) in 0.5 M H2SO4. The Gibbs free energy indicates that the catalytic HER performance is correlated with the active Se vacancy sites of polytypic structures.

Phase-Transition Mo1-xVxSe2 Alloy Nanosheets with Rich V-Se Vacancies and Their Enhanced Catalytic Performance of Hydrogen Evolution Reaction.

Alloys of transition-metal dichalcogenide can display distinctive phase evolution because of their two-dimensional structures. Herein, we report the colloidal synthesis of Mo1-xVxSe2 alloy nanosheets with full composition tuning. Alloying led to a phase transition at x = 0.7 from the semiconducting 2H phase MoSe2 to the metallic 1T phase VSe2. It also produced significant V and Se vacancies, which became the richest in the 2H phase at x = 0.3-0.5. Extensive spin-polarized density functional theory calculations consistently predicted the 2H-1T phase transition at x = 0.7, in agreement with the experimental results. The vacancy formation energy also supports the formation of V and Se vacancies. Alloying in the 2H phase enhanced the electrocatalytic performance toward hydrogen evolution reaction (HER) at x = 0.3 (in 0.5 M H2SO4) or 0.4 (in 1 M KOH). The Gibbs free energy along the HER pathway indicates that this maximum performance is due to the highest concentration of active V and Se vacancy sites.

Concurrent Vacancy and Adatom Defects of Mo1-xNbxSe2 Alloy Nanosheets Enhance Electrochemical Performance of Hydrogen Evolution Reaction.

Earth-abundant transition metal dichalcogenide nanosheets have emerged as an excellent catalyst for electrochemical water splitting to generate H2. Alloying the nanosheets with heteroatoms is a promising strategy to enhance their catalytic performance. Herein, we synthesized hexagonal (2H) phase Mo1-xNbxSe2 nanosheets over the whole composition range using a solvothermal reaction. Alloying results in a variety of atomic-scale crystal defects such as Se vacancies, metal vacancies, and adatoms. The defect content is maximized when x approaches 0.5. Detailed structure analysis revealed that the NbSe2 bonding structures in the alloy phase are more disordered than the MoSe2 ones. Compared to MoSe2 and NbSe2, Mo0.5Nb0.5Se2 exhibits much higher electrocatalytic performance for hydrogen evolution reaction. First-principles calculation was performed for the formation energy in the models for vacancies and adatoms, supporting that the alloy phase has more defects than either NbSe2 or MoSe2. The calculation predicted that the separated NbSe2 domain at x = 0.5 favors the concurrent formation of Nb/Se vacancies and adatoms in a highly cooperative way. Moreover, the Gibbs free energy along the reaction path suggests that the enhanced HER performance of alloy nanosheets originates from the higher concentration of defects that favor H atom adsorption.

Phase Evolution of Re1-xMoxSe2 Alloy Nanosheets and Their Enhanced Catalytic Activity toward Hydrogen Evolution Reaction.

Two-dimensional ReSe2 has emerged as a promising electrocatalyst for the hydrogen evolution reaction (HER), but its catalytic activity needs to be further improved. Herein, we synthesized Re1-xMoxSe2 alloy nanosheets with the whole range of x (0-100%) using a hydrothermal reaction. The phase evolved in the order of 1T″ (triclinic) → 1T' (monoclinic) → 2H (hexagonal) upon increasing x. In the nanosheets with x = 10%, the substitutional Mo atoms tended to aggregate in the 1T″ ReSe2 phase with Se vacancies. The incorporation of the 1T' phase makes the alloy nanosheets more metallic than the end compositions. The 10% Mo substitution significantly enhanced the electrocatalytic performance toward HER (in 0.5 M H2SO4), with a current of 10 mA cm-2 at an overpotential of 77 mV (vs RHE) and a Tafel slope of 42 mV dec-1. First-principles calculations of the three phases (1T″, 2H, and 1T') predicted a phase transition of 1T″-2H at x ≈ 65% as well as the production of a 1T' phase along the composition tuning, which are consistent with the experiments. At x = 12.5%, two Mo atoms prefer to form a pair along the Re4 chains. Gibbs free energy along the reaction path indicates that the best HER performance of nanosheets with 10% Mo originates from the Mo atoms that form Mo-H when there are adjacent Se vacancies.

Se-Rich MoSe2 Nanosheets and Their Superior Electrocatalytic Performance for Hydrogen Evolution Reaction.

Two-dimensional MoSe2 has emerged as a promising electrocatalyst for the hydrogen evolution reaction (HER), although its catalytic activity needs to be further improved. Herein, we report Se-rich MoSe2 nanosheets synthesized using a hydrothermal reaction, displaying much enhanced HER performance at the Se/Mo ratio of 2.3. The transition from the 2H to the 1T' phase occurred as Se/Mo exceeded 2. Structural analysis revealed the presence of Se adatoms as well as the formation of Se-Se bonding. Based on first-principles calculations, we propose two equally stable Se-rich structures. In the first one, excess Se atoms bridge two MoSe2 layers via the interlayer Se-Se bonds. In the second one, the Se atoms substitute for the Mo atoms, and extra Se atoms are added closest to the Mo-substituted Se. Calculation of Gibbs free energy along the reaction path indicates that the Se adatoms of the second model are the most active sites for HER.

Ruthenium Nanoparticles on Cobalt-Doped 1T' Phase MoS2 Nanosheets for Overall Water Splitting.

2D MoS2 nanostructures have recently attracted considerable attention because of their outstanding electrocatalytic properties. The synthesis of unique Co-Ru-MoS2 hybrid nanosheets with excellent catalytic activity toward overall water splitting in alkaline solution is reported. 1T' phase MoS2 nanosheets are doped homogeneously with Co atoms and decorated with Ru nanoparticles. The catalytic performance of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is characterized by low overpotentials of 52 and 308 mV at 10 mA cm-2 and Tafel slopes of 55 and 50 mV decade-1 in 1.0 m KOH, respectively. Analysis of X-ray photoelectron and absorption spectra of the catalysts show that the MoS2 well retained its metallic 1T' phase, which guarantees good electrical conductivity during the reaction. The Gibbs free energy calculation for the reaction pathway in alkaline electrolyte confirms that the Ru nanoparticles on the Co-doped MoS2 greatly enhance the HER activity. Water adsorption and dissociation take place favorably on the Ru, and the doped Co further catalyzes HER by making the reaction intermediates more favorable. The high OER performance is attributed to the catalytically active RuO2 nanoparticles that are produced via oxidation of Ru nanoparticles.

Electronegativity, phase transition, and ferroelectricity of TeSe2 few-layers.

We use first-principles calculations to demonstrate that γ TeSe2 few-layers (FLs) are significantly more stable than α and ß FLs due to the difference in the electronegativity of two kinds of atoms, while γ Te FLs are not due to the unfavorable multivalency of Te atoms. The quasiparticle single-shot G0W0 band gaps are 1.13 and 2.30 eV for γ and ß monolayers (MLs), respectively. Therefore, they will be useful for optoelectronics operating at room temperature, which is further supported by their dynamic and thermal stability. The γ ML and bilayer (BL) are expected to undergo phase transitions to ß ML and α BL under hole doping. Furthermore, the ionicity brings about spontaneous electric polarization in the α BL that is approximately 60% larger than that in the α Te BL. Its ferroelectricity (FE) is comparable to that of SnTe ML, the only 2D FE material experimentally identified up to now. The polarization can be further enhanced by more than 75% under uniaxial tensile strain.

Two-dimensional MoS2/Fe-phthalocyanine hybrid nanostructures as excellent electrocatalysts for hydrogen evolution and oxygen reduction reactions.

Two-dimensional (2D) MoS2 nanostructures have been extensively investigated in recent years because of their fascinating electrocatalytic properties. Herein, we report 2D hybrid nanostructures consisting of 1T' phase MoS2 and Fe-phthalocyanine (FePc) molecules that exhibit excellent catalytic activity toward both the hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR). X-ray absorption spectra revealed an increased Fe-N distance (2.04 Å) in the hybrid complex relative to the isolated FePc. Spin-polarized density functional theory calculations predicted that the Fe center moves toward the MoS2 layer and induces a non-planar structure with an increased Fe-N distance of 2.05 Å, which supports the experimental results. The experiments and calculations consistently show a significant charge transfer from FePc to stabilize the hybrid complex. The excellent HER catalytic performance of FePc-MoS2 is characterized by a low Tafel slope of 32 mV dec-1 at a current density of 10 mA cm-2 and an overpotential of 0.123 V. The ORR catalytic activity is superior to that of the commercial Pt/C catalyst in pH 13 electrolyte, with a more positive half-wave potential (0.89 vs. 0.84 V), a smaller Tafel slope (35 vs. 87 mV·dec-1), and a much better durability (9.3% vs. 40% degradation after 20 h). Such remarkable catalytic activity is ascribed to the HER-active 1T' phase MoS2 and the ORR-active nonplanar Fe-N4 site of FePc.

Two-Dimensional WS2@Nitrogen-Doped Graphite for High-Performance Lithium Ion Batteries: Experiments and Molecular Dynamics Simulations.

As promising candidates for anode materials in lithium ion batteries (LIB), two-dimensional tungsten disulfide (WS2) and WS2@(N-doped) graphite composites were synthesized, and their electrochemical properties were comprehensibly studied in conjunction with calculations. The WS2 nanosheets, WS2@graphite, and WS2@N-doped graphite (N-graphite) exhibit outstanding cycling performance with capacities of 633, 780, and 963 mA h g-1, respectively. To understand their lithium storage mechanism, first-principles calculations involving a series of ab initio NVT- NPT molecular dynamics simulations were conducted. The calculated discharge curves for amorphous phase are well matched with the experimental ones, and the capacities reach 620, 743, and 915 mA h g-1 for WS2, WS2@graphite, and WS2@N-graphite, respectively. The large capacities of the two composites can be attributed to the tendency of W and Li atoms to interact with graphite, suppressing the formation of W metal clusters. In the case of WS2@N-graphite, vigorous amorphization of the N-graphite enhances the interaction of W and Li atoms with the fragmented N-graphite in such a way that unfavorable Li-W repulsion is avoided at very early stage of lithiation. As a result, the volume expansion in WS2@graphite and WS2@N-graphite is calculated to be remarkably small (only 6 and 44%, respectively, versus 150% for WS2). Therefore WS2@(N-)graphite composites are expected to be almost free of mechanical pulverization after repeated cycles, which makes them promising and excellent candidates for high-performance LIBs.

Nitrogen-rich 1T'-MoS2 layered nanostructures using alkyl amines for high catalytic performance toward hydrogen evolution.

The imminent global energy crisis and current environmental issues have stimulated considerable research on high-performance catalysts for sustainable hydrogen energy generation. Two-dimensional layered MoS2 has recently drawn worldwide attention because of its excellent catalytic properties for the hydrogen evolution reaction (HER). In the present work, we prepared nitrogen (N)-rich 1T' (distorted 1T) phase MoS2 layered nanostructures using different alkyl amines with 1-4 nitrogen atoms (methylamine, ethylenediamine, diethylenetriamine, and triethylenetetramine) as intercalants. The amine molecules intercalate at 10 atomic%, and simultaneously supply the N atoms that substitute the S atoms to produce the N-doped MoS2, whose composition is MoS2(1-x)Nx, where x = 0.1-0.26. MoS2 prepared with amines having more N atoms has enhanced catalytic HER performance: a Tafel slope of 36 mV dec-1 and 10 mA cm-2 at -160 mV (vs. RHE). First-principles calculations showed that the amine intercalation and N doping increase the density of states near the Fermi level in a narrow range and bring about an effective overlap of the dz2(Mo), pz(S), and pz(N) states. These factors in turn increase the carrier (electron) concentration and mobility for improved HER. The calculation also predicted that the most active site is S vacancies. The present work illustrates how the HER catalytic performance of 1T' phase MoS2 can be effectively controlled by the amine molecules.

Inorganic molecule (O2, NO) adsorption on nitrogen- and phosphorus-doped MoS2 monolayer using first principle calculations.

We performed a systematic study of the adsorption behaviors of O2 and NO gas molecules on pristine MoS2, N-doped, and P-doped MoS2 monolayers via first principle calculations. Our adsorption energy calculations and charge analysis showed that the interactions between the NO and O2 molecules and P-MoS2 system are stronger than that of pristine and N-MoS2. The spin of the absorbed molecule couples differently depending on the type of gas molecule adsorbed on the P- and N-substituted MoS2 monolayer. Meanwhile, the adsorption of O2 molecules leaves N- and P-MoS2 a magnetic semiconductor, whereas the adsorption of an NO molecule turns this system into a nonmagnetic semiconductor, which may provide some helpful information for designing new N- and P-substituted MoS2-based nanoelectronic devices. Therefore, P- and N-MoS2 can be used to distinguish O2 and NO gases using magnetic properties, and P-MoS2-based gas sensors are predicted to be more sensitive to detect NO molecules rather than pristine and N-MoS2 systems.

Effects of carbon vacancies on the structures, mechanical properties, and chemical bonding of zirconium carbides: a first-principles study.

Interstitial carbides are able to maintain structural stability even with a high concentration of carbon vacancies. This feature provides them with tunable properties through the design of carbon vacancies, and thus making it important to reveal how carbon vacancies affect their properties. In the present study, using first-principles, we have calculated the properties of a number of stable and metastable zirconium carbides ZrC1-x (x = 0 and 1/n, n = 2-8) which were predicted by the evolutionary algorithm USPEX. Effects of carbon vacancies on the structures, mechanical properties, and chemical bonding of these zirconium carbides were systematically investigated. The distribution of carbon vacancies has significant influence on mechanical properties, especially Pugh's ratio. Nonadjacent carbon vacancies enhance Pugh's ratio, while grouped carbon vacancies decrease Pugh's ratio. This is explained by the changes in strength of Zr-C and Zr-Zr bonding around differently distributed carbon vacancies. We further explored the mechanical properties of zirconium carbides with impurities (N and O) by inserting N and O atoms into the sites of carbon vacancies. The enhanced mechanical properties of zirconium carbides were found.

Rational design of inorganic dielectric materials with expected permittivity.

Techniques for rapid design of dielectric materials with appropriate permittivity for many important technological applications are urgently needed. It is found that functional structure blocks (FSBs) are helpful in rational design of inorganic dielectrics with expected permittivity. To achieve this, coordination polyhedra are parameterized as FSBs and a simple empirical model to evaluate permittivity based on these FSB parameters is proposed. Using this model, a wide range of examples including ferroelectric, high/low permittivity materials are discussed, resulting in several candidate materials for experimental follow-up.