ABSTRACT
INTRODUCTION: Erbium-doped yttrium-aluminum-garnet (Er:YAG) laser debonding of zirconia and lithium disilicate restorations is increasingly used for a range of clinical applications. Using rotary instruments to remove such restorations for any purpose has proven to be challenging. Erbium laser has been reported to be a conservative method for removing ceramic restorations. There is little data in the literature about the effect of adhesive resin cement type on the debonding time of the ceramic restoration using the Er:YAG laser. OBJECTIVES: To evaluate and compare the time required for the Er:YAG laser to debond zirconia and lithium disilicate crowns bonded with a 2- and 1-bottle adhesive resin cement systems. MATERIALS AND METHODS: Forty extracted premolar teeth were prepared and scanned for milled 40 CAD/CAM crowns. Teeth were randomly assigned into groups (n = 10 per group): 3 mol% yttria-partially stabilized zirconia crowns 3Y-PSZ (G1a) bonded with Panavia™ V5 (2-bottle adhesive resin cement), Zirconia 3Y-PSZ crowns (G1b) bonded with RelyX™ Ultimate (1-bottle adhesive resin cement), and for the lithium disilicate crowns bonded with the two types of cements (G2a, G2b). Each specimen was irradiated with an Er:YAG laser at 335 mJ, 15 Hz, 5.0 W, and 50-ms pulse duration (super short pulse mode). The irradiation time required for crowns to be successfully debonded was recorded for each specimen. Data were statistically analyzed using ANOVA and Tukey HSD post-hoc test (p < 0.05), at the 95 percent level of confidence. The intaglio surface of the debonded crown was analyzed using scanning electron microscopy (SEM). RESULTS: The mean ± standard deviation times needed for crown debonding were 5.75 ± 2.00 min for the G1a group, 4.79 ± 1.20 min for group G1b, 1.69 ± 0.49 min for group G2a, and 1.12 ± 0.17 for group G2b. There was no statistically significant difference in debonding time between the 2- and 1- bottle adhesive resin cement within the groups G1a and b (p = 0.2914), or between groups G2a b (p = 0.7116). A statistically significant difference (p < 0.05) was found between groups G1a and G2a and b and between groups G1b and G2a and b were SEM analysis showed no changes in the microstructure of the ceramic surface after Er:YAG laser irradiation. CONCLUSION: Zirconia and lithium disilicate restorations can be debonded using Er:YAG lasers in a safe and efficient manner. There is no significant difference in the debonding time between the 2- and 1- bottle adhesive resin cement systems used in this study. CLINICAL SIGNIFICANCE: Retrieving zirconia and lithium disilicate ceramics can be a challenging process when using diamond rotary instruments. ER:YAG lasers may efficiently debond these ceramics from the tooth structure, independent of the bonding process used for bonding them.
ABSTRACT
OBJECTIVES: Guided implant systems can be used as a training approach for placing implants. This in vitro prospective randomized pilot study evaluated the learning progression and skill development in freehand placement of two implants supporting a three-unit fixed prosthesis on a simulation model among novice operators. MATERIAL AND METHODS: Four senior dental students with no prior implant placement experience participated in the study. As a baseline, each student placed two mandibular and two maxillary implants by freehand technique on a simulation model. Sixteen consecutive guided placements using a static guide, dynamic navigation, and template-based guide followed totaling 32 guided implant placements into maxillary and mandibular models. Freehand implant placements before and after the various guided navigation attempts were compared to assess their impact on freehand skill. Metrics compared included surgical time, horizontal, vertical, and angulation discrepancies between the planned and placed implant positions measured on superimposed CBCT scans and analyzed with repeated measures regression with Tukey's adjusted pairwise comparisons (α = .05). RESULTS: Before training with guided techniques, the average baseline freehand implant placement took 10.2 min and decreased to 8.2 after training but this difference was not statistically significant (p = .1670) There was marginal evidence of a significant difference in the 3D apex deviation with an average improvement of 0.89 mm (95% CI: -0.38, 2.16, p = .1120); and marginal evidence of a significant improvement in the overall angle with an average improvement of 3.74° (95% CI: -1.00, 8.48, p = .0869) between baseline and final freehand placement attempts. CONCLUSIONS: Within the limitations of this pilot study, guided implant placement experiences did not significantly benefit or hinder freehand placement skills. Dental students should be exposed to various placement techniques to prepare them for clinical practice and allow them to make informed decisions on the best technique based on their skills and a given clinical scenario.
Subject(s)
Dental Implants , Surgery, Computer-Assisted , Humans , Pilot Projects , Prospective Studies , Dental Implantation, Endosseous/methodsABSTRACT
STATEMENT OF PROBLEM: Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) restorations of different formulations are being used increasingly in monolithic form for a range of clinical applications. Using rotary instruments to remove such restorations for any purpose is challenging, but they can be removed conservatively with erbium lasers. However, studies on how a laser penetrates different zirconias to break the cement bond between the tooth surface and the zirconia are lacking. PURPOSE: The purpose of this in vitro study was to evaluate and compare the time required for an erbium-doped yttrium-aluminum-garnet (Er:YAG) laser to remove different types of zirconia and lithium disilicate crowns. MATERIAL AND METHODS: Forty extracted premolar teeth were prepared, scanned, designed, and milled to fabricate 40 computer-aided design and computer-aided manufacturing (CAD-CAM) crowns, which were assigned to 4 groups (n=10): 3 mol% Y-TZP, 4 mol% Y-TZP, 5 mol% Y-TZP, and lithium disilicate as a control. All crowns were bonded to the teeth with a self-adhesive resin cement (Panavia SA Cement Universal). Each specimen was irradiated with an Er:YAG laser with the following parameters: 300 mJ, 15 Hz, 5.0 W, and a 50-microsecond pulse duration (supershort pulse mode). The irradiation time required for crowns to be retrieved successfully was recorded for each specimen. Data were statistically analyzed using analysis of variance and the Tukey honestly significant difference post hoc test (α=.05). The intaglio surfaces of the restorations were analyzed using scanning electron microscopy (SEM). RESULTS: The mean ±standard deviation times in minutes needed for crown debonding were 12.46 ±4.17 for the 3 mol% Y-TZP group, 10.30 ±3.33 for the 4 mol% Y-TZP group, 4.03 ±1.62 for the 5 mol% Y-TZP group, and 2.08 ±0.92 for the lithium disilicate group. A statistically significant difference (P<.05) in the debonding time was found for all investigated groups, expect between the 3 mol% and 4 mol% Y-TZP groups and between the 5 mol% Y-TZP and lithium disilicate groups. SEM analysis of the ceramic surfaces showed no visual damage associated with Er:YAG laser irradiation. CONCLUSIONS: Zirconia crown retrieval time with the Er:YAG laser was influenced by the yttria content of the zirconia, with decreasing retrieval time with increasing yttria content. Er:YAG laser debonding of zirconia crowns is a noninvasive, efficient, and rapid approach to the removal of crowns and could be applied in clinical practice.
Subject(s)
Lasers, Solid-State , Yttrium , Lasers, Solid-State/therapeutic use , Erbium , Dental Porcelain/chemistry , Crowns , Zirconium/chemistry , Ceramics , Resin Cements , Dental Cements , Materials TestingABSTRACT
BACKGROUND: The purpose of this study was to assess the effectiveness and practicality of erbium lasers in the removal of ceramic restorations and appliances from natural teeth and dental implant abutments in clinical practice. METHODS: A retrospective analysis was conducted, involving 29 clinical cases with a total of 52 abutments requiring the removal of various ceramic restorations. The analysis evaluated the clinical procedures performed, including the type and material of the prosthetic, the type of cement used, laser setting parameters, retrieval time, and retrieval success. RESULTS: Out of the 52 abutments, 50 were successfully retrieved without causing any damage (>95%) using either an Er,Cr:YSGG laser (N = 6) or an Er:YAG laser (N = 46). In one case, a crown was partially sectioned to prevent any negative impact of laser irradiation on the adhesive strength between the post and tooth, and in another case, a fracture occurred during debonding. The restorations consisted of 13 lithium disilicate and 39 zirconia units, including six veneers, 38 single crowns, and three fixed partial dentures (FPDs). The retrieval time varied depending on the restoration type, material thickness, cement type, retention form/fitting of the abutment and restoration, ranging from 2.25 ±0.61 minutes for veneers, 6.89 ±8.07 minutes for crowns, to 25 ±10 minutes per abutment for FPDs. Removal of a zirconia crown required more time, 7.12±8.91 minutes, compared to a lithium disilicate crown, 5.86 ±2.41 minutes. The debonding time was influenced by the laser settings as well as materials and types of prosthesis. CONCLUSIONS: Erbium lasers present a safe and effective alternative to invasive methods for removing ceramic restorations, without causing harm to the abutment or prosthesis. Laser-assisted debonding allows for recementation of the restorations during the same appointment, making it a conservative and viable option for ceramic crown retrieval in clinical settings.
Subject(s)
Lasers, Solid-State , Lasers, Solid-State/therapeutic use , Erbium , Retrospective Studies , Crowns , Zirconium , Dental Porcelain , Ceramics , Dental Restoration Failure , Materials TestingABSTRACT
PURPOSE: Removal of ceramic restorations and appliances can be time consuming, invasive, and inconvenient. Erbium lasers offer an alternative noninvasive method for debonding of ceramic appliances. This paper aims to provide a comprehensive review of current literature on the effectiveness of erbium lasers for removal of ceramic restorations and appliances from natural teeth and dental implants. METHODS: A comprehensive search of 7 databases, including Medline (Ovid), Embase, Dentistry and Oral Sciences Source (DOSS), Web of Science, Cochrane Library, and ProQuest Dissertations and Theses was performed. The inclusion and exclusion criteria were agreed prior to the literature search. Two reviewers independently screened the title and abstract. A third reviewer then broke the tie, if any. The selected articles then underwent full text review and the data was extracted. RESULTS: The search identified 4117 unique articles published through June 10, 2021. Studies were assessed and categorized based on the type of restoration/appliance, type of abutment, type of laser, laser settings, efficacy of debonding, and pulpal temperature rise. Thirty-eight full-text articles were reviewed for inclusion. Time for ceramic debonding varies depending on the type of restorations and materials. Removal of zirconia crowns from teeth and implant abutments requires a longer period of time compared to lithium disilicate crowns. Temperature increases were reported as 5.5 degrees or less. Laser setting and laser type affect the debonding time and the increase in temperature. Examinations of debonded ceramics demonstrated no known structural damages resulting from laser applications. CONCLUSIONS: Erbium lasers are effective noninvasive tools to remove all ceramic restorations/appliances from natural teeth and implant abutments without causing harm to abutments. Laser-assisted debonding should be considered as a viable alternative to rotary instrumentation for ceramic crowns; however, clinical studies of erbium-assisted ceramic retrieval are needed.
Subject(s)
Erbium , Lasers, Solid-State , Ceramics , Crowns , Lasers, Solid-State/therapeutic use , Dental Debonding/methodsABSTRACT
Various guiding methods are used to place implants. This ex vivo pilot study used a convenience sample to examine time and accuracy for placement of 2 dental implants supporting a 3-unit fixed prosthesis on a simulation model using freehand and 3 guided placement techniques. Four operators with no prior implant placement experiences were randomly assigned placement of 2 maxillary or mandibular implants for a fixed prosthesis. Techniques included dynamic navigation (DN), static guide (SG), template-based guide (TBG), and freehand placement (FH). Preoperative and operative times were recorded. Discrepancies between the planned and placed implant positions were assessed by superimposing preoperative and postoperative cone beam computerized tomography scans. Data were analyzed with repeated-measures regression with Tukey's adjusted pairwise comparisons (α = 0.05). Dynamic navigation was associated with the longest operative time (13.5 minutes vs 5-10.2, P = .0001) but overall fastest when incorporating preoperative time (32.1 minutes vs 143-181.5, P < .0001). All deviation measures were significantly associated with the placement method (P < .05) except apex vertical deviation (P = .3925). Implants placed by SG had significantly lower entry 2-dimensional deviation than the other methods, particularly on the mandible. The DN and SG methods had significantly lower Apex 3D and overall angle deviations, again particularly on the mandible. The mandible had significantly higher deviations than maxilla. Within limitations of this study, implant placement by novice operators is more accurate when using dynamic and static guidance compared to freehand and template-based techniques.
Subject(s)
Dental Implants , Surgery, Computer-Assisted , Computer-Aided Design , Cone-Beam Computed Tomography , Dental Implantation, Endosseous/methods , Denture, Partial, Fixed , Imaging, Three-Dimensional , Pilot Projects , Surgery, Computer-Assisted/methodsABSTRACT
This study compared the laser and rotary removals of prefabricated zirconia crowns in primary anterior and permanent posterior teeth. Sixty-two extracted teeth were prepared for prefabricated zirconia crowns cemented with resin-modified glass-ionomer cement. Specimens underwent crown removals by a rotary handpiece, or erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser. Pulpal temperatures, removal times, and scanning electron microscopy (SEM) examinations were compared. The average crown removal time for rotary and laser methods was 80.9 ± 19.36 s and 353.3 ± 110.6 s, respectively, for anterior primary teeth; and 114.2 ± 32.1 s and 288.5 ± 76.1 s, respectively, for posterior teeth (p < 0.001). The maximum temperature for the rotary and laser groups was 22.2 ± 8.5 °C and 27.7 ± 1.6 °C for anterior teeth, respectively (p < 0.001); and 21.8 ± 0.77 °C and 25.8 ± 0.85 °C for the posterior teeth, respectively (p < 0.001). More open dentinal tubules appeared in the rotary than the laser group. The rotary handpiece removal method may be more efficient than the laser with lower pulpal temperature changes. However, the laser method does not create noticeable tooth or crown structural damage compared to the rotary method.
ABSTRACT
This report describes the use of a temporary dental implant to secure a radiographic fiducial marker and patient-tracking tag to an edentulous mandible for dynamically guided implant placement into a fibula microvascular free flap. A small-diameter dental implant was placed into the anterior mandible to secure a radiographic fiducial marker followed by a patient tag. The patient tag allowed for tracking of the patient's mandible during placement of endosseous dental implants. Four endosseous dental implants were successfully placed into the edentulous fibula free flap mandibular reconstruction. Dynamic navigation using a small-diameter implant to secure radiographic fiducial markers and patient tags provides a novel technique to place implants into an edentulous microvascular free flap with minimal incision and reflection of soft tissue.
Subject(s)
Dental Implants , Mouth, Edentulous , Humans , Dental Implantation, Endosseous/methods , Dental Prosthesis, Implant-Supported , Mandible/diagnostic imaging , Mandible/surgery , Fibula/surgery , Mouth, Edentulous/diagnostic imaging , Mouth, Edentulous/surgeryABSTRACT
The goal of this perspective article is to use multiple idiopathic cervical root resorption (MICRR) as a model to demonstrate the need for transdisciplinary collaborations, from basic science to treatment planning, to improve the quality of health care for all. This is not a review of the literature on the current state of MICRR. Tooth root resorption is a normal physiological process required for resorption and exfoliation of primary teeth; however, root resorption of adult teeth is largely pathological. MICRR is an aggressive form of external root resorption, which occurs near the cemento-enamel junction (CEJ). The cause of MICRR remains elusive, however, it is mediated primarily by osteoclasts/odontoclasts. Accumulating case studies and experiments in animal models have provided insights into defining the etiologies and pathophysiological mechanisms for MICRR, which include: systemic conditions and syndromes, inherited genetic variants affecting osteoclast/odontoclast activity, altered periodontal structures, drug-induced root resorption and rebound effects after cessation of anti-resorptive treatment, chemotherapy, exposure to pets or viral infections, and other factors such as inflammatory conditions or trauma. To determine the causative factors for MICRR, as well as other oral-dental conditions, at minimum, a comprehensive health history should be collected for all patients by dental care providers, discussed with other health care providers and appropriate collaborations established. The examples highlighted in this perspective emphasize the need for transdisciplinary research collaborations coupled with integrated management strategies between medicine and dentistry in order to identify cause(s) early and improve clinical outcomes.
ABSTRACT
BACKGROUND: Reduced tooth structure in the pediatric and adolescent population is frequently restored with prefabricated zirconia crowns. On permanent teeth, these restorations may need to be removed and replaced with permanent restorations. OBJECTIVES: To explore and compare the use of 2 high-powered erbium lasers for removing prefabricated zirconia crowns from molar teeth as a non-invasive alternative to rotary instruments. MATERIAL AND METHODS: Twenty-five permanent molars were prepared to dentin and prefabricated all-ceramic zirconia crowns were fitted and cemented with resin modified glass ionomer (RMGI) cement. The teeth were randomly assigned into one of the 2 retrieval treatment groups: the erbium-doped yttrium, aluminum and garnet (Er:YAG) laser group (G1; n = 12) or the erbium, chromium-doped yttrium, scandium, gallium and garnet laser (Er,Cr:YSGG) laser group (G2; n = 13). The laser operating parameters for the Er:YAG laser were 300 mJ, 15 Hz, 4.5 W, and 50-microsecond pulse duration (SSP mode); for the Er,Cr:YSGG laser, they were 4.5 W, 15 Hz, 20 water/20 air, and 5 W, 15 Hz, 50 water/50 air, and 60-microsecond pulse duration (H mode). The experiment was repeated twice. The surface area and the volume of teeth and crowns were measured and the cement space was calculated. The retrieval time and temperature changes were tested and recorded. The data were analyzed with the t-test. The surfaces of the dentin and the crown from each group were further examined using scanning electron microscopy (SEM). RESULTS: The average time for crown removal using the Er:YAG laser was 1 min 32.7 s; for the Er,Cr:YSGG laser it was 3 min 13.9 s (p < 0.0001). The mean temperature changes were 1.41 ±1.36°C for the Er:YAG laser and 2.2 ±0.99°C for the Er,Cr:YSGG laser (p = 0.0321). The SEM examination showed no damage or major structural changes caused by treatment with either erbium-family laser. CONCLUSIONS: Both lasers are effective, non-invasive tools to remove prefabricated zirconia crowns cemented with resin cement and should be considered as viable alternatives to rotary instrumentation.
Subject(s)
Lasers, Solid-State , Crowns , Humans , Yttrium , ZirconiumABSTRACT
Periodontitis is an inflammatory condition triggered by selected oral microbiota; thus treatment strategies should be aimed at reducing the abundance of the pathogenic bacteria. An obstacle to preclinical testing of such strategies is the availability of reliable animal models. Here, a non-human primate (NHP), Macaca mulatta, was used to examine the effectiveness of a novel antimicrobial, amixicile, which inhibits pyruvate-ferredoxin oxidoreductase (PFOR) present in anaerobic bacteria. Animals were assessed for their periodontal health, including radiography, clinical attachment loss (CAL), presence of plaque (PI), bleeding on probing (BOP) and pocket depth (PD), and sampled for saliva, gingival crevicular fluid (GCF), and subgingival plaque to determine their baseline clinical status. Amixicile was then administered for 2 weeks (40 mg/kg/day) and the animals were monitored for periodontal health immediately after the antibiotic treatment, then at 1 month-, 3 months-, and 6-months posttreatment. Microbial species present in plaque and saliva were determined through 16S rDNA sequencing. Baseline assessment of the microbiome has shown a significant proportion of bacteria belonging to the Streptococcus, Haemophilus, Porphyromonas, Gemella, and Fusobacterium genera. The abundance of Porphyromonas and Fusobacterium was reduced following treatment with amixicile, whereas that of Escherichia, Haemophilus, and Gemella were elevated. CAL, PD, and BOP were also significantly reduced following the treatment. In conclusion, the NHP model proves useful for preclinical studies of strategies targeting selected members of the oral microbiome. We show that amixicile reduces the levels of anaerobic bacteria under in vivo conditions, correlating with a reduction in CAL, PD, and BOP, thus validating its usefulness as an antimicrobial strategy.
ABSTRACT
The aim of this randomized in vitro study was to compare the time and accuracy of implant-site preparation and implant placement using a trephine drill versus a conventional drilling technique under dynamic navigation. In total, 42 implants were placed in simulation jaw models with the 2 drilling techniques by 2 operators who had previous experience with dynamic navigation. The timing of each implant placement was recorded, and horizontal, vertical, and angulation discrepancies between the planned and placed implants were compared. There was no significant difference in time or accuracy between the trephine and conventional drilling techniques. Implant-site preparation with a single trephine drill using dynamic navigation was as accurate under in vitro experimental conditions as a conventional drilling sequence.
Subject(s)
Dental Implants , Surgery, Computer-Assisted , Dental Implantation, EndosseousABSTRACT
PURPOSE: The purpose of this study was to investigate if the addition of biologic agents to a particulate bone graft enhances horizontal ridge augmentation outcomes in terms of bone dimensions, bone density, and successful implant placement. MATERIALS AND METHODS: A retrospective chart review was done to assess the clinical and radiographic outcomes in 52 horizontal ridge augmentation sites in 43 patients. Information was gathered regarding surgical technique, type of graft material, biologic agents used (PRP or rhPDGF-BB), method of space maintenance, and achieved alveolar ridge width and bone density changes as quantified on CBCT scans. RESULTS: The use of tenting screws, a resorbable membrane, and a combination of particulate allogenic and xenogenic bone graft material provided an average horizontal bone gain of 3.6 mm in the 52 augmented sites. There was no statistically significant difference observed in the amount of horizontal bone gain between sites treated with the addition of biologic agents (n = 21), or with a particulate bone graft alone (n = 31). A marginally statistically significant difference was found in the density of the grafted bone with the addition of biologics (p value = .0653). CONCLUSION: The addition of biologic agents to the graft materials did not have a significant effect on the amount of horizontal bone gain or successful implant placement; however, it marginally enhanced the bone density of the grafted area.
Subject(s)
Alveolar Ridge Augmentation , Biological Products , Biological Factors , Dental Implantation, Endosseous , Humans , Retrospective StudiesABSTRACT
(1) Background: Prefabricated zirconia crowns are used to restore teeth in children. The purpose of this study was to evaluate the removal of these crowns with the erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser; (2) Methods: A total of 12 primary and 12 permanent teeth were prepared and prefabricated zirconia crowns were passively fitted and cemented with two resin modified glass-ionomer (RMGI) cements. Surface areas of prepared teeth and crowns were calculated. Crowns were removed using two laser settings: 4.5 Watts, 15 Hertz, 20 water/20 air, and 5 Watts, 15 Hertz, 50 water/50 air. The retrieval time and temperature changes were tested recorded. Data were analyzed using ANOVA with Tukey's adjusted post hoc pairwise comparison t-test; (3) Results: The average time for crown removal was: 3 min, 47.7 s for permanent; and 2 min 5 s for primary teeth. The mean temperature changes were 2.48 °C (SD = 1.43) for permanent; and 3.14 °C (SD = 1.88) for primary teeth. The time to debond was significantly positively correlated with tooth inner surface area and volume, outer crown volume, and the cement volume; (4) Conclusions: Use of the Er,Cr:YSGG laser is an effective, safe and non-invasive method to remove prefabricated zirconia crowns cemented with RMGI cements from permanent and primary teeth.
ABSTRACT
The presence of healthy soft tissue at the tooth and implant interface correlates to long-term success and stability in function and esthetics. Grafting procedures utilizing various techniques can be performed during any stage of the implant or restorative therapy. Materials of autogenous, allogeneic, and xenogeneic sources are available for oral soft tissue grafting. This article describes the classifications of soft tissue defects, treatment modalities, and materials used to enhance soft tissue quality and quantity and to achieve optimal esthetics and function around teeth and implants.
Subject(s)
Dental Implants , Esthetics, Dental , HumansABSTRACT
INTRODUCTION: The aim of this in vitro study was to compare the speed, qualitative precision, and quantitative loss of tooth structure with freehand and dynamically navigated access preparation techniques for root canal location in 3-dimensional-printed teeth with simulated calcified root canals. METHODS: Forty maxillary and mandibular central incisors (tooth #9 and tooth #25) were 3-dimensionally printed to simulate canal calcification. Under simulated clinical conditions, access preparations were randomly performed with contemporary freehand and dynamically navigated techniques. Qualitative precision and quantitative loss of tooth structure were assessed on postoperative cone-beam computed tomographic scans using ITK-SNAP open-source segmentation (http://www.itksnap.org/). The associations between jaw, technique, volume of substance loss, and operating time were determined using analysis of variance models with Tukey-adjusted post hoc pair-wise comparisons. The kappa statistic was used to determine agreement between 2 independent, blinded raters on the qualitative assessment of the drill path. The association between the technique and jaw and qualitative assessment scoring was compared using the Fisher exact test. The significance level was set at .05. RESULTS: Dynamically navigated accesses resulted in significantly less mean substance loss in comparison with the freehand technique (27.2 vs 40.7 mm3, P < .05). Dynamically navigated accesses were also associated with higher optimal precision (drill path centered) to locate calcified canals in comparison with the freehand technique (75% vs 45%, P > .05). Mandibular teeth were associated with a negligible difference in substance loss between the access techniques (19.0 vs 19.1 mm3, P > .05). However, qualitatively the freehand technique was still prone to 30% higher chance of suboptimal precision (drill path tangentially transported) in locating calcified canals. Overall, dynamically navigated accesses were prepared significantly faster than freehand preparations (2.2 vs 7.06 minutes, P < .05). CONCLUSIONS: Within the limitations of this in vitro study, overall dynamically navigated access preparations led to significantly less mean substance loss with optimal and efficient precision in locating simulated anterior calcified root canals in comparison with freehand access preparations.
Subject(s)
Dental Pulp Cavity , Root Canal Therapy , Cone-Beam Computed Tomography , Dental Cavity Preparation , Dental Pulp Cavity/diagnostic imaging , Dental Pulp Cavity/surgery , Incisor/diagnostic imagingABSTRACT
BACKGROUND: Removal of cement-retained implant fixed restorations when needed, can be challenging. Conventional methods of crown removal are time consuming and costly for patients and practitioners. This research explored the use of two different types of pulsed erbium lasers as a non-invasive tool to retrieve cemented zirconia crowns from zirconia implant abutments. MATERIALS AND METHODS: Twenty identical zirconia crowns were cemented onto 20 identical zirconia prefabricated abutments using self-adhesive resin cement. The specimens were divided into two groups for laser assisted crown removal; G1 for erbium-doped yttrium aluminum garnet laser (Er:YAG), and G2 for erbium, chromium-doped yttrium, scandium, gallium and garnet (Er,Cr:YSGG). For the G1, after the first crown removal, the specimens were re-cemented and removed again using the Er:YAG laser. Times needed to remove the crowns were recorded and analyzed using ANOVA (α = 0.05). The surfaces of the crown and the abutment were further examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) analyses. RESULTS: The average times of zirconia crown removal from zirconia abutments were 5 min 20 sec and 5 min 15 sec for the Er:YAG laser of first and second experiments (G1), and 5 min 55 sec for the Er,Cr:YSGG laser experiment (G2). No statistical differences were observed among the groups. SEM and EDS examinations of the materials showed no visual surface damaging or material alteration from the two pulsed erbium lasers. CONCLUSIONS: Both types of pulsed erbium lasers can be viable alternatives for retrieving a zirconia crown from a zirconia implant abutment. Despite operating at different wavelengths, the Er:YAG and Er,Cr:YSGG lasers, perform similarly in removing a zirconia crown from a zirconia implant abutment with similar parameters. There are no visual and elemental composition damages as a result of irradiation with pulsed erbium lasers.
Subject(s)
Dental Bonding/methods , Dental Prosthesis/methods , Lasers, Solid-State/therapeutic use , Chromium , Crowns , Erbium , Gallium , Humans , Microscopy, Electron, Scanning/methods , Resin Cements , Tooth Crown/physiology , Yttrium , ZirconiumABSTRACT
BACKGROUND: When implants are restored with cement-retained restorations, prosthetic retrievability can be difficult and often requires sectioning using rotary instruments. Sometimes repeated removals of a cement-retained implant crown are needed such as for treatment of peri-implantitis or immediate implant provisionalization. The purpose of this study was to evaluate the effect of erbium-doped yttrium aluminum garnet (Er:YAG) laser as a non-invasive treatment modality to remove lithium disilicate crowns from zirconia implant abutments following long-term cementation, repetitive debonding and re-cementation, and short-term retrieval. MATERIAL AND METHODS: Twenty identical lithium disilicate crowns were cemented onto zirconia prefabricated abutments using composite resin cement. Ten cemented crowns were removed at 48 hours after cementation as a short-term group (ST), while another 10 were removed 6 months after cementation as a long-term group (LT). To mimicking repetitive recementation and retrieval, the LT crowns were then recemented and removed after 48 hours as a long-term recemention (LTR) group. The LTR crowns were then again recemented and removed after 48 hours as a long-term repeated recemention (LTRR) group. Er:YAG laser was used to facilitate the retrieval of these crowns. recorded and analyzed using ANOVA and t-test. The surfaces of the crown and the abutment were further examined using light microscopy and scanning electron microscopy (SEM). Temperature changes of the abutment and crown upto 10 minutes were also measured and statistically analyzed (paired t-test). RESULTS: The average times of crown removal from zirconia abutments were 4 minutes (min) and 42 second (sec) in LT to 3 min 24 sec in LTR, and 3 min 12 sec in LTRR and ST groups. LTR took the longest time to remove, statistically (ANOVA and t-test, p < .001). No statistical differences were observed among the removal times of LTR, LTRR, and ST groups (t-test, p = .246, .246 and 1). SEM examination of the material surface showed no visual surface damaging from treatment with Er:YAG laser. The temperatures during irradiation ranged from 18.4°C to 20°C and 22.2°C to 24.5°C (Paired t-test, p < .0001) for the abutment and the crown during irradiation from 1 min to 10 mins. CONCLUSIONS: Long-term cementation can increase time in lithium disilicate crown removal from zirconia abutment using Er:YAG. Er:YAG laser is a non-invasive tool to remove cement-retained implant prostheses and should be considered as a viable alternative to rotary instruments.