Modelling of organic field effect transistors with inkjet printed poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) electrodes: study of the annealing effects.

In the present work, the transport mechanism of organic transistors with bottom-gate/top-contact structure, manufactured by employing traditional and inkjet printing techniques, was studied. Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) conductive polymer was used for realizing printed source, drain and gate electrodes. The influence of the printing parameters (substrate temperature, drop overlapping degree, drop emission frequency) on the uniformity and morphology of the PEDOT:PSS layer was investigated. Polymethyl methacrylate (PMMA) was used as organic dielectric and pentacene, deposited by thermal evaporation, was employed as p-type semiconductor. Organic field effect transistors (OFETs) were fabricated and electrically characterized before and after the thermal annealing process at 120 degrees C for 1 h in nitrogen ambient. The effect of the annealing on the performances of the OFETs was investigated by modelling the measured electrical characteristics and analyzing them in terms of mobility, characteristic temperature and energy distribution of the density of localized states (DOS). In addition, the OFET working under electrical stress in ambient conditions was observed and discussed.

Novel organic LED structures based on a highly conductive polymeric photonic crystal electrode.

In this work we demonstrate the possibility to realize a novel unconventional ITO-free organic light emitting diode (OLED) utilizing a photonic polymeric electrode. Combining electron beam lithography and a plasma etching process to partially structure the highly conductive poly(3,4 ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) it is possible to realize an embedded photonic crystal (PC) structure. The realized PC-anode drastically reduces the light trapped in the OLED, demonstrating the possibility to eliminate further process stages and making it easier to use this technology even on rollable and flexible substrates.

Study of the interference effects in an optical cavity for organic light-emitting diode applications.

The interference effects generated in a bottom-emitting electroluminescent device fabricated on a polymer underlayer introduced with the aim of improving the anode roughness have been studied. The analysis of the interference fringes at different detection angles and the spatial coherence demonstrates that this phenomenon is due to multiple internal reflections that propagate in the polymer layer. This effect can be eliminated by modifying the polymer thickness and the incidence angle of the electromagnetic radiation at the anode-polymer interface. Inkjet etching technology is adopted for microcavities-shaped polymer structuring to destroy the resonator effect of the optical cavity.