Magnon-mediated qubit coupling determined via dissipation measurements.

Controlled interaction between localized and delocalized solid-state spin systems offers a compelling platform for on-chip quantum information processing with quantum spintronics. Hybrid quantum systems (HQSs) of localized nitrogen-vacancy (NV) centers in diamond and delocalized magnon modes in ferrimagnets-systems with naturally commensurate energies-have recently attracted significant attention, especially for interconnecting isolated spin qubits at length-scales far beyond those set by the dipolar coupling. However, despite extensive theoretical efforts, there is a lack of experimental characterization of the magnon-mediated interaction between NV centers, which is necessary to develop such hybrid quantum architectures. Here, we experimentally determine the magnon-mediated NV-NV coupling from the magnon-induced self-energy of NV centers. Our results are quantitatively consistent with a model in which the NV center is coupled to magnons by dipolar interactions. This work provides a versatile tool to characterize HQSs in the absence of strong coupling, informing future efforts to engineer entangled solid-state systems.

Deterministic nanoscale quantum spin-defect implantation and diffraction strain imaging.

Local crystallographic features negatively affect quantum spin defects by changing the local electrostatic environment, often resulting in degraded or varied qubit optical and coherence properties. Few tools exist that enable the deterministic synthesis and study of such intricate systems on the nano-scale, making defect-to-defect strain environment quantification difficult. In this paper, we highlight state-of-the-art capabilities from the U.S. Department of Energy's Nanoscale Science Research Centers that directly address these shortcomings. Specifically, we demonstrate how complementary capabilities of nano-implantation and nano-diffraction can be used to demonstrate the quantum relevant, spatially deterministic creation of neutral divacancy centers in 4H silicon carbide, while investigating and characterizing these systems on the≤25nmscale with strain sensitivities on the order of1×10-6,relevant to defect formation dynamics. This work lays the foundation for ongoing studies into the dynamics and deterministic formation of low strain homogeneous quantum relevant spin defects in the solid state.

Tunable and Transferable Diamond Membranes for Integrated Quantum Technologies.

Color centers in diamond are widely explored as qubits in quantum technologies. However, challenges remain in the effective and efficient integration of these diamond-hosted qubits in device heterostructures. Here, nanoscale-thick uniform diamond membranes are synthesized via "smart-cut" and isotopically (12C) purified overgrowth. These membranes have tunable thicknesses (demonstrated 50 to 250 nm), are deterministically transferable, have bilaterally atomically flat surfaces (Rq ≤ 0.3 nm), and bulk-diamond-like crystallinity. Color centers are synthesized via both implantation and in situ overgrowth incorporation. Within 110-nm-thick membranes, individual germanium-vacancy (GeV-) centers exhibit stable photoluminescence at 5.4 K and average optical transition line widths as low as 125 MHz. The room temperature spin coherence of individual nitrogen-vacancy (NV-) centers shows Ramsey spin dephasing times (T2*) and Hahn echo times (T2) as long as 150 and 400 µs, respectively. This platform enables the straightforward integration of diamond membranes that host coherent color centers into quantum technologies.

High-Q Nanophotonic Resonators on Diamond Membranes using Templated Atomic Layer Deposition of TiO2.

Integrating solid-state quantum emitters with nanophotonic resonators is essential for efficient spin-photon interfacing and optical networking applications. While diamond color centers have proven to be excellent candidates for emerging quantum technologies, their integration with optical resonators remains challenging. Conventional approaches based on etching resonators into diamond often negatively impact color center performance and offer low device yield. Here, we developed an integrated photonics platform based on templated atomic layer deposition of TiO2 on diamond membranes. Our fabrication method yields high-performance nanophotonic devices while avoiding etching wavelength-scale features into diamond. Moreover, this technique generates highly reproducible optical resonances and can be iterated on individual diamond samples, a unique processing advantage. Our approach is suitable for a broad range of both wavelengths and substrates and can enable high-cooperativity interfacing between cavity photons and coherent defects in diamond or silicon carbide, rare earth ions, or other material systems.

Stabilization of point-defect spin qubits by quantum wells.

Defect-based quantum systems in wide bandgap semiconductors are strong candidates for scalable quantum-information technologies. However, these systems are often complicated by charge-state instabilities and interference by phonons, which can diminish spin-initialization fidelities and limit room-temperature operation. Here, we identify a pathway around these drawbacks by showing that an engineered quantum well can stabilize the charge state of a qubit. Using density-functional theory and experimental synchrotron X-ray diffraction studies, we construct a model for previously unattributed point defect centers in silicon carbide as a near-stacking fault axial divacancy and show how this model explains these defects' robustness against photoionization and room temperature stability. These results provide a materials-based solution to the optical instability of color centers in semiconductors, paving the way for the development of robust single-photon sources and spin qubits.

Degradation of atrazine in aqueous solution with electrophotocatalytic process using TiO2-x photoanode.

The present study investigates the efficiency of a sustainable treatment technology, the electrophotocatalytic (EPC) process using innovative photoanode TiO2-x prepared by a magnetron sputter deposition process to remove the herbicide atrazine (ATZ) from water. The coexistence of anatase and rutile were identified by X-ray diffraction (XRD) and the presence of oxygen vacancies reduce the value of the observed bandgap to 3.0 eV compared to the typical 3.2 eV TiO2, this reduction is concomitant with a partial phase transition which is probably responsible for the increase in photoactivity. The experimental results with an initial concentration of ATZ (100 µg L(-1)) show that more than 99% of ATZ oxidation was obtained after 30 min of treatment and reaction kinetic constant was about 0.146 min(-1). This good efficiency indicates that EPC process is an efficient, simple and green technique for degradation of pesticides such as ATZ in water. The analysis with liquid chromatography technique permits to identify, quantify and see the evolution of ATZ by-products which are generated by dechlorination, dealkylation and alkylic-oxidation mechanisms. Finally, the possible pathways of ATZ degradation by hydroxyl radicals were proposed.

Towards high efficiency air-processed near-infrared responsive photovoltaics: bulk heterojunction solar cells based on PbS/CdS core-shell quantum dots and TiO2 nanorod arrays.

Near infrared (NIR) PbS quantum dots (QDs) have attracted significant research interest in solar cell applications as they offer several advantages, such as tunable band gaps, capability of absorbing NIR photons, low cost solution processability and high potential for multiple exciton generation. Nonetheless, reports on solar cells based on NIR PbS/CdS core-shell QDs, which are in general more stable and better passivated than PbS QDs and thus more promising for solar cell applications, remain very rare. Herein we report high efficiency bulk heterojunction QD solar cells involving hydrothermally grown TiO2 nanorod arrays and PbS/CdS core-shell QDs processed in air (except for a device thermal annealing step) with a photoresponse extended to wavelengths >1200 nm and with a power conversion efficiency (PCE) as high as 4.43%. This efficiency was achieved by introducing a thin, sputter-deposited, uniform TiO2 seed layer to improve the interface between the TiO2 nanorod arrays and the front electrode, by optimizing TiO2 nanorod length and by conducting QD annealing treatment to enhance charge carrier transport. It was found that the effect of the seed layer became more obvious when the TiO2 nanorods were longer. Although photocurrent did not change much, both open circuit voltage and fill factor clearly changed with TiO2 nanorod length. This was mainly attributed to the variation of charge transport and recombination processes, as evidenced by series and shunt resistance studies. The optimal PCE was obtained at the nanorod length of ∼450 nm. Annealing is shown to further increase the PCE by ∼18%, because of the improvement of charge carrier transport in the devices as evidenced by considerably increased photocurrent. Our results clearly demonstrate the potential of the PbS/CdS core-shell QDs for the achievement of high PCE, solution processable and NIR responsive QD solar cells.

Electrochemical treatment of domestic wastewater using boron-doped diamond and nanostructured amorphous carbon electrodes.

The performance of the electrochemical oxidation process for efficient treatment of domestic wastewater loaded with organic matter was studied. The process was firstly evaluated in terms of its capability of producing an oxidant agent (H2O2) using amorphous carbon (or carbon felt) as cathode, whereas Ti/BDD electrode was used as anode. Relatively high concentrations of H2O2 (0.064 mM) was produced after 90 min of electrolysis time, at 4.0 A of current intensity and using amorphous carbon at the cathode. Factorial design and central composite design methodologies were successively used to define the optimal operating conditions to reach maximum removal of chemical oxygen demand (COD) and color. Current intensity and electrolysis time were found to influence the removal of COD and color. The contribution of current intensity on the removal of COD and color was around 59.1 and 58.8%, respectively, whereas the contribution of treatment time on the removal of COD and color was around 23.2 and 22.9%, respectively. The electrochemical treatment applied under 3.0 A of current intensity, during 120 min of electrolysis time and using Ti/BDD as anode, was found to be the optimal operating condition in terms of cost/effectiveness. Under these optimal conditions, the average removal rates of COD and color were 78.9 ± 2 and 85.5 ± 2 %, whereas 70% of total organic carbon removal was achieved.

Removal of chlortetracycline from spiked municipal wastewater using a photoelectrocatalytic process operated under sunlight irradiations.

The degradation of chlortetracycline in synthetic solution and in municipal effluent was investigated using a photoelectrocatalytic oxidation process under visible irradiation. The N-doped TiO2 used as photoanode with 3.4 at.% of nitrogen content was prepared by means of a radiofrequency magnetron sputtering (RF-MS) process. Under visible irradiation, higher photoelectrocatalytic removal efficiency of CTC was recorded using N-doped TiO2 compared to the conventional electrochemical oxidation, direct photolysis and photocatalysis processes. The photoelectrocatalytic process operated at 0.6A of current intensity during 180 min of treatment time promotes the degradation of 99.1 ± 0.1% of CTC. Under these conditions, removal rates of 85.4 ± 3.6%, 87.4 ± 3.1% and 55.7 ± 2.9% of TOC, TN and NH4(+) have been recorded. During the treatment, CTC was mainly transformed into CO2 and H2O. The process was also found to be effective in removing indicator of pathogens such as fecal coliform (log-inactivation was higher than 1.2 units).

Electrochemical degradation of chlortetracycline using N-doped Ti/TiO2 photoanode under sunlight irradiations.

The appearance and the persistence of pharmaceutical products in the aquatic environment urgently call for the development of an innovative and practical water treatment technology. This study deals with the development of nanostructured nitrogen-doped TiO2 photoanodes and their subsequent use for chlortetracycline (CTC) photoelectrocatalytic oxidation under visible light. The N-doped TiO2 photoanodes with different nitrogen contents were prepared by means of a radiofrequency magnetron sputtering (RF-MS) process, with the objective to tune shift their optical absorption from the UV towards the visible. The N-doped TiO2 consist of nanostructured anatase phase with average TiO2 nanocrystallite size of 29 nm. The nitrogen doping is clearly shown to produce the desired red shift of the absorption onset of the TiO2 coatings (from ~380 nm to ~550 nm). Likewise, the N-doped TiO2 are found to be highly photo-electroactive not only under the UV light but most interestingly under the visible light as well. Using the optimal N-doped photoanodes, 99.6% of CTC (100 µg/L) was successfully degraded after 180 min of treatment time with a current intensity of 0.6 A. Under these conditions, a relatively high mineralization of CTC (92.5% ± 0.26% of TOC removal and 90.3% ± 1.1% of TN removal) was achieved.