Composition-Thermometric Properties Correlations in Homodinuclear Eu3+ Luminescent Complexes.

A family of homodinuclear Ln3+ (Ln3+ = Gd3+, Eu3+) luminescent complexes with the general formula [Ln2(ß-diketonato)6(N-oxide)y] has been developed to study the effect of the ß-diketonato and N-oxide ligands on their thermometric properties. The investigated complexes are [Ln2(tta)6(pyrzMO)2] (Ln = Eu (1·C7H8), Gd (5)), [Ln2(dbm)6(pyrzMO)2] (Ln = Eu (2), Gd (6)), [Ln2(bta)6(pyrzMO)2] (Ln = Eu (3), Gd (7)), [Ln2(hfac)6(pyrzMO)3] (Ln = Eu (4), Gd (8)) (pyrzMO = pyrazine N-oxide, Htta = thenoyltrifluoroacetone, Hdbm = dibenzoylmethane, Hbta = benzoyltrifluoroacetone, Hhfac = hexafluoroacetylacetone, C7H8 = toluene), and their 4,4'-bipyridine N-oxide (bipyMO) analogues. Europium complexes emit a bright red light under UV radiation at room temperature, whose intensity displays a strong temperature (T) dependence between 223 and 373 K. This remarkable variation is exploited to develop a series of luminescent thermometers by using the integrated intensity of the 5D0 → 7F2 europium transition as the thermometric parameter (Δ). The effect of different ß-diketonato and N-oxide ligands is investigated with particular regard to the shape of thermometer calibration (Δ vs T) and relative thermal sensitivity curves: i.e.. the change in Δ per degree of temperature variation usually indicated as Sr (% K-1). The thermometric properties are determined by the presence of two nonradiative deactivation channels, back energy transfer (BEnT) from Eu3+ to the ligand triplet levels and ligand to metal charge transfer (LMCT). In the complexes bearing tta and dbm ligands, whose triplet energy is ca. 20000 cm-1, both deactivation channels are active in the same temperature range, and both contribute to determine the thermometric properties. Conversely, with bta and hfac ligands the response of the europium luminescence to temperature variation is ruled by LMCT channels since the high triplet energy (>21400 cm-1) makes BEnT ineffective in the investigated temperature range.

Circularly Polarized Luminescence of Silica-Grafted Europium Chiral Derivatives Prepared through a Sequential Functionalization.

We describe a new organic/inorganic material emitting circularly polarized luminescence (CPL). The hybrid system was obtained by the following steps: (i) preliminary grafting of the europium N,N-dibutylcarbamate [Eu(O2CNBu2)3] complex onto silica, (ii) substitution of the residual carbamato groups with anionic 1,3-diphenyl-1,3-propanedionato ligands (dbm), and (iii) subsequent introduction of the neutral tridentate chiral ligand 2,6-bis(isopropyl-2-oxazolin-2-yl)pyridine (iPr-PyBox) in the metal coordination sphere. The solid material is stable to air and does not leach either the metal or the ligand. Samples of both enantiomers have been studied, showing mirror-image CPL spectra. The molecular compounds [Eu(dbm)3-(S)-(iPr-PyBox)] and [Eu(dbm)3-(R)-(iPr-PyBox)] were prepared for comparison purposes and their molecular structures studied by single-crystal X-ray diffraction, showing mononuclear derivatives with a coordination number of 9 for europium. Powder X-ray diffraction showed a single crystalline phase. Photoluminescence and CPL evidenced the presence of a single emitting species.

A convenient route to dinuclear chloro-bridged platinum(II) derivatives via nitrile complexes.

The syntheses of the complexes [PtCl(2)(NCR)L] [R = Me, Et; L = PPh(3); R = Et, L = Py, CO] and [PtCl{(κ(2)-P,C)P(OC(6)H(4))(OPh)(2)}(NCEt)] are described starting from the easily available [PtCl(2)(NCR)(2)]. The stability of the products under different experimental conditions is discussed as well as their use as precursors to dinuclear complexes [Pt(µ-Cl)ClL](2). The crystal and molecular structures of cis-[PtCl(2)(NCEt)(PPh(3))], [SP-4-2]-[PtCl{(κ(2)-P,C)P(OC(6)H(4))(OPh)(2)}(NCEt)] and trans-[Pt(µ-Cl){(κ(2)-P,C)P(OC(6)H(4))(OPh)(2)}](2) are reported.

Bent dinuclear platinum(II) halo-bridged carbonyl complexes.

Crystals of trans-Pt2(µ-X)2X2(CO)2 (X = Br, I) have been grown and their molecular and crystalline structures have been solved by X-ray diffraction methods. In both cases the dinuclear molecules are bent, with a bending angle of 164.6° and 156.5° for the bromide and the iodide, respectively. While the structure of the bromo-derivative is reported here for the first time, a modification of trans-Pt2(µ-I)2I2(CO)2 with planar centrosymmetric molecules is known. This appears to be a rare case of a platinum(II) halo-bridged derivative structurally characterized in both bent and planar forms.

Nanostructured copper oxide on silica-zirconia mixed oxides by chemical implantation.

N,N-Dialkylcarbamato complexes of copper(II), [Cu(O(2)CNR(2))(2)] (R = All = allyl, C(3)H(5); iPr, CH(CH(3))(2)) were prepared with the aim of functionalizing silica and nanostructured silica-zirconia matrices. The mixed matrices for the grafting reactions were prepared by copolymerizing MAPTMS (methacryloxypropyltrimethoxysilane), the precursor for the silica matrix, with the zirconium tetranuclear derivative [Zr(4)O(2)(OMc)(12)] (OMc = methacrylate), the precursor for the zirconia nanoparticles. Suspension of the silica and silica-zirconia matrices in a solution of the copper dialkylcarbamate led to the functionalization of the respective substrates. The composition, microstructure, morphology, and physicochemical nature of the copper species grafted on the matrices were investigated by FTIR, X-ray photoelectron spectroscopy (XPS), EPR, X-ray absorption spectroscopy (XAS), XRD, TEM, and dinitrogen adsorption. The effect of selected experimental parameters (the nature of the copper precursor and of the matrix, grafting time, thermal treatment) on the grafting reaction was investigated. The Cu/Si ratio is increased by increasing the grafting time and the ZrO(2)-SiO(2) matrix is more reactive to attack by the carbamato complexes than either prepared or commercial SiO(2). After functionalization of the matrix, thermal treatment yielded nanostructured copper(II) oxide clusters, average diameter 12-15 nm, uniformly supported on the silica and on the silica-zirconia matrices.

N,N-Di-iso-propylcarbamato complexes of boron.

N,N-di- iso-propylcarbamato derivatives of boron(III) have been synthesized from di-iso-propylamine and boron trichloride in the presence of carbon dioxide. With a large excess of amine, a single boron product was obtained, [NH2i)Pr2][B(O2CNiPr2)4], 1, while with a lower excess a mixture of 1 and of the dinuclear derivative [B2(O2CNiPr2)6], 2, was produced. By heating in vacuo at 60 degrees C, solid 1 slowly converted to 2. The transformation was reversible, 2 giving 1 back with di- iso-propylamine under carbon dioxide at atmospheric pressure. The molecular structure of both compounds was established by X-ray diffraction methods. Compound 1 is constituted by ion-pairs where the ammonium cation is hydrogen-bonded to the mononuclear anion. Compound 2 is a dinuclear species with two bridging carbamato ligands. In both derivatives, boron shows tetrahedral coordination. As IR- and 1H NMR spectra of the two species are well differentiated, it is possible to monitor the interconversion of 1 and 2 by both spectroscopic methods.

Simple preparations of Pd6Cl12, Pt6Cl12, and Qn[Pt2Cl8+n], n=1, 2 (Q=TBA+, PPN+) and structural characterization of [TBA][Pt2Cl9] and [PPN]2[Pt2Cl10].C7H8.

The hexanuclear Pd6Cl12, i.e., the crystal phase classified as beta-PdCl2, was obtained by reacting [TBA]2[Pd2Cl6] with AlCl3 (or FeCl3) in CH2Cl2. The action of AlCl3 on PtCl42-, followed by digestion of the resulting solid in 1,2-C2H4Cl2 (DCE), CHCl3, or benzene, produced Pt6Cl12.DCE, Pt6Cl12.CHCl3, or Pt6Cl12.C6H6, respectively. Treating [TBA]2[PtCl6] with a slight excess of AlCl3 afforded [TBA][Pt2Cl9], whose anion was established crystallographically to be constituted by two "PtCl6" octahedra sharing a face. Dehydration of H2PtCl6.nH2O with SOCl2 gave an amorphous compound closely analyzing as PtCl4, reactive with [Q]Cl in SOCl2 to yield [Q][Pt2Cl9] or [Q]2[Pt2Cl10], depending on the [Q]Cl/Pt molar ratio (Q=TBA+, PPN+). A single-crystal X-ray diffraction study has shown [PPN]2[Pt2Cl10].C7H8 to contain dinuclear anions formed by two edge-sharing PtCl6 octahedra.