Electric Fields in Liquid Water Irradiated with Protons at Ultrahigh Dose Rates.

We study the effects of irradiating water with 3 MeV protons at high doses by observing the motion of charged polystyrene beads outside the proton beam. By single-particle tracking, we measure a radial velocity of the order of microns per second. Combining electrokinetic theory with simulations of the beam-generated reaction products and their outward diffusion, we find that the bead motion is due to electrophoresis in the electric field induced by the mobility contrast of cations and anions. This work sheds light on the perturbation of biological systems by high-dose radiations and paves the way for the manipulation of colloid or macromolecular dispersions by radiation-induced diffusiophoresis.

Comparison of PEDOT films obtained via three different routes through spectroelectrochemistry and the differential cyclic voltabsorptometry method (DCVA).

The performance of different poly(3,4-ethylenedioxythiophene) (PEDOT) films was compared by electrochemical, spectroelectrochemical, and time-derivative measurements of absorbance versus potential (linear potential-scan voltabsorptometry) for an overall spectroelectrochemical characterization of the electrochromic properties in ionic liquids such as 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMITFSI). The time-derivative signals were monitored at different wavelengths, and information obtained therefrom was complementary to that obtained from conventional cyclic voltammetry. PEDOT films prepared via in situ chemical oxidative polymerization appeared to be much more efficient than electropolymerized and PEDOT-poly(styrenesulfonate) (PSS) reference films, in terms of both contrast ratio and coloration efficiency, which was the case even for PEDOT films deposited on less conductive flexible plastic substrates.

Electrochemical fluorination of La(2)CuO(4): a mild "chimie douce" route to superconducting oxyfluoride materials.

The fluorination of La(2)CuO(4) was achieved for the first time under normal conditions of pressure and temperature (1 MPa and 298 K) via electrochemical insertion in organic fluorinated electrolytes and led to lanthanum oxyfluorides of general formula La(2)CuO(4)F(x). Analyses showed that, underneath a very thin layer of LaF(3) (a few atomic layers), fluorine is effectively inserted in the material's structure. The fluorination strongly modifies the lanthanum environment, whereas very little modification is observed on copper, suggesting an insertion in the La(2)O(2) blocks of the structure. In all cases, fluorine insertion breaks the translation symmetry and introduces a long-distance disorder, as shown by electron spin resonance. These results highlight the efficiency of electrochemistry as a new "chimie douce" type fluorination technique for solid-state materials. Performed at room temperature, it additionally does not require any specific experimental care. The choice of the electrolytic medium is crucial with regard to the fluorine insertion rate as well as the material deterioration. Successful application of this technique to the well-known La(2)CuO(4) material provides a basis for further syntheses from other oxides.

Thermochromic phase transition on CuMo0.9W0.1O4@SiO2 core-shell particles.

The thermochromic phase transition of CuMo(1-x)W(x)O(4) oxide was delayed by the deposit of SiO(2) shells. The phase transition temperature was investigated by optical reflectivity versus temperature. The effect of the shell thickness on the transition temperature is established. The cyclability of the phenomenon is also discussed.

Microglia used as vehicles for both inducible thymidine kinase gene therapy and MRI contrast agents for glioma therapy.

Microglia are phagocytic cells that are chemoattracted by brain tumors and can represent up to 70% of the tumor cell population. To get insight into gene therapy against glioma, we decided to take advantage of those microglia properties and to use those cells as vehicles to transport simultaneously a suicide gene (under the control of a heat-sensitive promoter) and contrast agents to localize them by magnetic resonance imaging before applying any therapeutic treatment. Thymidine kinase (TK) expression and its functionality after gancyclovir administration were investigated. After the heat shock (44 degrees C and 20 min), TK was expressed in 50% of the cells. However, after gancyclovir treatment, 90% of the cells died by apoptosis, showing an important bystander effect. Then, the cells were incubated with new lanthanide contrast agents to check both their potential toxicity and their MR properties. Results indicate that the nanoparticles did not induce any cell toxicity and yield a hypersignal on MR images at 4.7 T. These in vitro experiments indicate that microglia are good candidates as vectors in gene therapy against brain tumors. Finally, microglia containing gadolinium-grafted nanoparticles were injected in the close vicinity of C6 tumor, in a mouse. The hyperintensive signal obtained on in vivo images as well as its retention time show the potential of the novel contrast agents for cellular imaging.

Smart control of monodisperse Stöber silica particles: effect of reactant addition rate on growth process.

Control over the synthesis of monodisperse silica particles up to mesoscopic scale is generally made difficult due to intrinsic limitation to submicrometric dimensions and secondary nucleation in seeded experiments. To investigate this issue and overcome these difficulties, we have implemented single step processing by quantifying the effects of the progressive addition of a diluted tetraethyl orthosilicate solution in ethanol on the size and monodispersity of silica particles. Contrary to particles grown in seeded polymerization, monodisperse particles with size up to 2 microm were synthesized. Moreover, the particles exhibit a final diameter (d(f)), which varies with V(-1/3) over more than 2 orders of magnitude in rate of addition (V). On the basis of a kinetic study in the presence of addition showing that particle growth is limited by the diffusion of monomer species, we developed a diffusion-limited growth model to theoretically explain the observed d(f)(V) behavior and quantitatively retrieve the measured amplitude and exponent. Using a single parameter procedure, we can therefore predict and generate in the room temperature range, monodisperse particles of a targeted size by simply adjusting the rate of addition.