Conceptual design of a heavy ion beam probe diagnostic for the Wendelstein 7-X Stellarator.

This article describes the current state of the design of the heavy ion beam probe (HIBP) for Wendelstein 7-X (W7-X). It will be the first HIBP diagnostic on an optimized stellarator and is designed to study electric fields and ion scale turbulence in all W7-X reference magnetic configurations. The use of an existing 2 MV accelerator, located outside of the torus hall, results in the need for a circuitous primary beamline. This increases the complexity of the ion optics design to deliver a focused beam to the plasma. To access most of the magnetic configuration space of W7-X, the secondary beamline and an energy analyzer are designed to pivot, thereby redirecting a wider range of secondary beam trajectories. Signal level estimates indicate that the equilibrium potential can be measured at all radii and that the radial coverage for potential and density fluctuations measurements depends on the plasma density.

Improvement in the spatial resolution of heavy ion beam probe measurements through application of ion optics.

A technique for more accurately modeling and improving the spatial resolution of heavy ion beam probe measurements is described. We use a set of particle trajectories to numerically determine the focusing properties of a complicated three-dimensional magnetic field and characterize these properties with a transfer matrix. We then modify the transfer matrix approach of traditional ion optics to include a parameter that describes the ionization location of the detected ions. The ion optics model calculated using this technique enables a more accurate description of the particle trajectories than previously feasible. The model also allows one to easily determine an initial beam focus that could be used during experimental operation to optimize the spatial resolution of measurements. The technique has been applied to the design of a heavy ion beam probe diagnostic for the Wendelstein 7-X stellarator, and improvements in the modeled spatial resolution by a factor of about 2 over previous estimates are possible. The improved spatial resolution will enable measurements of plasma fluctuations with smaller wavelengths than would otherwise be possible.

Noise mitigation methods for ion detectors operating with a direct view of high temperature plasmas.

We have developed an ion current measurement instrument with a direct view of a plasma that reduces the particle and radiation-induced noise current it detects by over three orders of magnitude, from tens of microamps to tens of nanoamps. This is accomplished using electric fields, magnetic fields, and physical shielding that limit the flux of particles and radiation into the instrument and suppress the secondary electrons produced within it by particle and radiation impact. Operation of this detector in various configurations, without an ion beam, has allowed identification of the sources of noise current. In our experimental setup, the largest noise contributors were found to be plasma ions and photoelectric emission due to UV radiation.

Control of secondary electrons from ion beam impact using a positive potential electrode.

Secondary electrons emitted when an ion beam impacts a detector can amplify the ion beam signal, but also introduce errors if electrons from one detector propagate to another. A potassium ion beam and a detector comprised of ten impact wires, four split-plates, and a pair of biased electrodes were used to demonstrate that a low-voltage, positive electrode can be used to maintain the beneficial amplification effect while greatly reducing the error introduced from the electrons traveling between detector elements.

Development of a beam ion velocity detector for the heavy ion beam probe.

In an axisymmetric plasma, the conservation of canonical angular momentum constrains heavy ion beam probe (HIBP) trajectories such that measurement of the toroidal velocity component of secondary ions provides a localized determination of the poloidal flux at the volume where they originated. We have developed a prototype detector which is designed to determine the beam angle in one dimension through the detection of ion current landing on two parallel planes of detecting elements. A set of apertures creates a pattern of ion current on wires in the first plane and solid metal plates behind them; the relative amounts detected by the wires and plates determine the angle which beam ions enter the detector, which is used to infer the toroidal velocity component. The design evolved from a series of simulations within which we modeled ion beam velocity changes due to equilibrium and fluctuating magnetic fields, along with the ion beam profile and velocity dispersion, and studied how these and characteristics such as the size, cross section, and spacing of the detector elements affect performance.

Resolving small signal measurements in experimental plasma environments using calibrated subtraction of noise signals.

The performance of many diagnostic and control systems within fusion and other fields of research are often detrimentally affected by spurious noise signals. This is particularly true for those (such as radiation or particle detectors) working with very small signals. Common sources of radiated and conducted noise in experimental fusion environments include the plasma itself and instrumentation. The noise complicates data analysis, as illustrated by noise on signals measured with the heavy ion beam probe (HIBP) installed on the Madison Symmetric Torus. The noise is time-varying and often exceeds the secondary ion beam current (in contrast with previous applications). Analysis of the noise identifies the dominant source as photoelectric emission from the detectors induced by ultraviolet light from the plasma. This has led to the development of a calibrated subtraction technique, which largely removes the undesired temporal noise signals from data. The advantages of the technique for small signal measurement applications are demonstrated through improvements realized on HIBP fluctuation measurements.

Heavy ion beam probe advances from the first installation of the diagnostic on an RFP (invited).

Heavy ion beam probes have been installed on a variety of toroidal devices, but the first and only application on a reversed field pinch is the diagnostic on the Madison Symmetric Torus. Simultaneous measurements of spatially localized equilibrium potential and fluctuations of density and potential, previously inaccessible in the core of the reversed field pinch (RFP), are now attainable. These measurements reflect the unique strength of the heavy ion beam probe (HIBP) diagnostic. They will help determine the characteristics and evolution of electrostatic fluctuations and their role in transport, and determine the relation of the interior electric field and flows. Many aspects of the RFP present original challenges to HIBP operation and inference of plasma quantities. The magnetic field contributes to a number of the issues: the comparable magnitudes of the toroidal and poloidal fields and edge reversal result in highly three-dimensional beam trajectories; partial generation of the magnetic field by plasma current cause it and hence the beam trajectories to vary with time; and temporal topology and amplitude changes are common. Associated complications include strong ultraviolet radiation and elevated particle losses that can alter functionality of the electrostatic systems and generate noise on the detectors. These complexities have necessitated the development of new operation and data analysis techniques: the implementation of primary and secondary beamlines, adoption of alternative beam steering methods, development of higher precision electrostatic system models, refinement of trajectory calculations and sample volume modeling, establishment of stray particle and noise reduction methods, and formulation of alternative data analysis techniques. These innovative methods and the knowledge gained with this system are likely to translate to future HIBP operation on large scale stellarators and tokamaks.

Heavy ion beam probe operation in time varying equilibria of improved confinement reversed field pinch discharges.

Operation of a heavy ion beam probe (HIBP) on a reversed field pinch is unique from other toroidal applications because the magnetic field is more temporal and largely produced by plasma current. Improved confinement, produced through the transient application of a poloidal electric field which leads to a reduction of dynamo activity, exhibits gradual changes in equilibrium plasma quantities. A consequence of this is sweeping of the HIBP trajectories by the dynamic magnetic field, resulting in motion of the sample volume. In addition, the plasma potential evolves with the magnetic equilibrium. Measurement of the potential as a function of time is thus a combination of temporal changes of the equilibrium and motion of the sample volume. A frequent additional complication is a nonideal balance of ion current on the detectors resulting from changes in the beam trajectory (magnetic field) and energy (plasma potential). This necessitates use of data selection criteria. Nevertheless, the HIBP on the Madison Symmetric Torus has acquired measurements as a function of time throughout improved confinement. A technique developed to infer the potential in the improved confinement reversed field pinch from HIBP data in light of the time varying plasma equilibrium will be discussed.

Computer simulation of three-dimensional heavy ion beam trajectory imaging techniques used for magnetic field estimation.

A magnetic field mapping technique via heavy ion beam trajectory imaging is being developed on the Madison Symmetric Torus reversed field pinch. This paper describes the computational tools created to model camera images of the light emitted from a simulated ion beam, reconstruct a three-dimensional trajectory, and estimate the accuracy of the reconstruction. First, a computer model is used to create images of the torus interior from any candidate camera location. It is used to explore the visual field of the camera and thus to guide camera parameters and placement. Second, it is shown that a three-dimensional ion beam trajectory can be recovered from a pair of perspectively projected trajectory images. The reconstruction considers effects due to finite beam size, nonuniform beam current density, and image background noise. Third, it is demonstrated that the trajectory reconstructed from camera images can help compute magnetic field profiles, and might be used as an additional constraint to an equilibrium reconstruction code, such as MSTFit.

The marrow cell continuum: stochastic determinism.

Traditional models of hematopoiesis have been hierarchical in nature. Over the past 10 years, we have developed data indicating that hematopoiesis is regulated in a continuum with deterministic and stochastic components. We have shown that the most primitive stem cells, as represented by lineage negative rhodamine(low) Hoechst(low) murine marrow cells are continuously or intermittently cycling as determined by in vivo BrdU labeling. When marrow stem cells are induced to transit cell cycle by in vitro exposure to cytokines, either IL-3, IL-6, IL-11, and steel factor or thrombopoietin, FLT3 ligand, and steel factor, they progress through cycle in a highly synchronized fashion. We have determined that when the stem cells progress through a cytokine stimulated cell cycle the homing, engraftment, adhesion protein, global gene expression, and hematopoietic differentiation phenotypes all change in a reversible fashion. This has led to the continuum model, in which, with cycle transit, chromatin is continually changing altering open transcription areas and providing a continually changing landscape of transcriptional opportunity. More recently, we have extended the changing differentiation profiles to differentiation into lung cells and found that non-hematopoietic differentiation also shows cycle related reversibly modulation. These observations all together support a continuum model of stem cell regulation in which the phenotype of the marrow stem cells is continually and reversibly changing over time.

Tissue injury in marrow transdifferentiation.

Recent findings indicate that adult BM contains cells that can differentiate into mature, nonhematopoietic cells of multiple tissues including cells of the kidney, lung, liver, skin and GI tract and fibers of heart and skeletal muscle. Recently the number of these observations has substantially increased, but there is a lack of information on the mechanistic issues in stem cell plasticity. In three different models for skin, liver and skeletal muscle plasticity, we have shown that following transplantation of the marrow cells from green fluorescent protein (GFP) transgenic mice, high levels of conversion of marrow cells can be identified. Injury to the tissue was the single most important factor for this phenomenon since the incidence of marrow to other tissue conversions significantly increased after tissue injury was implemented. Our studies also demonstrate the effect of radiation on the extent of marrow conversion.

Tolerance induction by costimulator blockade in 100 cGy treated hosts with varying degrees of genetic disparity.

Long-term multilineage allochimerism can be obtained in H2-mismatched B6.SJL to BALB/c transplants with host irradiation of 100 cGy, donor spleen cell pre-exposure and costimulator blockade with anti-CD40 ligand (CD40L) antibody. We evaluated this allochimerism approach in murine marrow transplants with different degrees of major histocompatibility complexe (MHC) mismatching; these include: (1) H2-mismatched transplant H2Kk to H2Kb, (2) full haplo-identical transplant H2Kbd to H2Kbk, (3) a partial haplo-identical transplant H2Kd to H2Kbd and (4) an MHC class II mismatch. Levels of chimerism increased up to 12 weeks and then stayed relatively stable up to 1 year after transplant. At 18 weeks post-transplant, the H2-mismatched, haplo-identical, partial haplo-identical and class II-mismatch transplants evidenced 17.9+/-4.4, 40.7+/-0.9, 25.1+/-4.19 and 33.7+/-3.5% donor chimerism, respectively. Dropping the anti-CD40 antibody treatment and spleen cells or changing the schedule of antibody to one injection, in haplo-identical or full-mismatched transplants resulted in no donor-derived chimerism. On the other hand, these still resulted in minor chimerism in class II-mismatched transplants. Lineage analysis of peripheral blood at 6 and 12 months post-transplant demonstrated a significant shift toward increased chimeric lymphocytes and decreased chimeric granulocytes in the full H2 as compared with haplo-identical or class II transplants. Transplantation with anti-CD40L antibody eliminated both graft-versus-leukemia and graft-versus-host disease (GVHD) and delayed lymphocyte infusion did not rescue animals from fatal leukemia. In conclusion, under the conditions of our tolerization regimen, a haplo transplant gives higher engraftment levels than a full H2 mismatch, and despite lower engraftment levels, a class II-mismatched transplant can be successfully accomplished with only 100 cGy and no CD40L blockade.

The marrow stem cell: the continuum.

The marrow hematopoietic stem cell is currently being redefined as to all aspects of its phenotype and its total differentiation capacity. This redefinition now includes its plasticity as to production of nonhematopoietic and hematopoietic cell types, the determinants of its in vivo engraftment potential and its expression of stem cell functional characteristics.

Marrow stem cell potential within a continuum.

On the basis of our studies of the fluctuation of the hematopoietic stem cell phenotype with cell cycle trnsit, we hypothesize that the ability of marrow stem cells to convert to nonhematopoietic cells will also vary at different points in the cell cycle. The new biology of stem cells has an impact on many fields including developmental biology and stem cell biology and the clinical potential is enormous.

Core electrostatic fluctuations and particle transport in a reversed-field pinch.

Potential and electron-density fluctuation profiles, phi(r) and ñ(e)(r)/n(e), are measured for the first time in the core of a reversed-field pinch using a heavy ion beam probe. It is found that the fluctuations are broadband and correlated with the core resonant m/n=1/6 tearing mode. The electrostatic-fluctuation-induced particle transport in the core of standard RFP plasmas, estimated from measured <ñ(e)phi>, is small compared to the total particle flux. Measurements of fluctuations and estimates of fluctuation induced particle transport in improved confinement RFP discharges are also presented.

Disruption of Ini1 leads to peri-implantation lethality and tumorigenesis in mice.

SNF5/INI1 is a component of the ATP-dependent chromatin remodeling enzyme family SWI/SNF. Germ line mutations of INI1 have been identified in children with brain and renal rhabdoid tumors, indicating that INI1 is a tumor suppressor. Here we report that disruption of Ini1 expression in mice results in early embryonic lethality. Ini1-null embryos die between 3.5 and 5.5 days postcoitum, and Ini1-null blastocysts fail to hatch, form the trophectoderm, or expand the inner cell mass when cultured in vitro. Furthermore, we report that approximately 15% of Ini1-heterozygous mice present with tumors, mostly undifferentiated or poorly differentiated sarcomas. Tumor formation is associated with a loss of heterozygocity at the Ini1 locus, characterizing Ini1 as a tumor suppressor in mice. Thus, Ini1 is essential for embryo viability and for repression of oncogenesis in the adult organism.

Molecular analysis of paternity.

The unit covers Variable Numbers of Tandem Repeats (VNTR) based paternity analysis as well as the newer methods relying on PCR to analyze sequence-specific polymorphisms and microsatellite regions. The discussion of data analysis and probability calculations has been expanded to address a number of special circumstances, such as the lack of sample from an alleged father, motherless cases, and more.

Intimacy issues: sexuality, fertility, and relationships.

OBJECTIVES: To provide a review of the intimacy issues, (sexuality, fertility, and interpersonal relationships) that have an impact on the lives of cancer survivors. DATA SOURCES: Published articles, research studies, and textbook chapters. CONCLUSION: The experience of living with cancer impacts the survivors interpersonal relationships, sexuality, and fertility. As cancer treatments become more effective in prolonging life, options that preserve sexual function and fertility will be more prevalent. IMPLICATIONS FOR NURSING PRACTICE: It is the responsibility of the oncology health care professional to become educated about options that preserve sexual function and fertility and inform patients before treatment decisions are made.

Reducing environmental risk associated with laboratory decommissioning and property transfer.

The need for more or less space is a common laboratory problem. Solutions may include renovating existing space, leaving or demolishing old space, or acquiring new space or property for building. All of these options carry potential environmental risk. Such risk can be the result of activities related to the laboratory facility or property (e.g., asbestos, underground storage tanks, lead paint), or the research associated with it (e.g., radioactive, microbiological, and chemical contamination). Regardless of the option chosen to solve the space problem, the potential environmental risk must be mitigated and the laboratory space and/or property must be decommissioned or rendered safe prior to any renovation, demolition, or property transfer activities. Not mitigating the environmental risk through a decommissioning process can incur significant financial liability for any costs associated with future decommissioning cleanup activities. Out of necessity, a functioning system, environmental due diligence auditing, has evolved over time to assess environmental risk and reduce associated financial liability. This system involves a 4-phase approach to identify, document, manage, and clean up areas of environmental concern or liability, including contamination. Environmental due diligence auditing includes a) historical site assessment, b) characterization assessment, c) remedial effort and d) final status survey. General practice standards from the American Society for Testing and Materials are available for conducting the first two phases. However, standards have not yet been developed for conducting the third and final phases of the environmental due diligence auditing process. Individuals involved in laboratory decommissioning work in the biomedical research industry consider this a key weakness.