ABSTRACT
PURPOSE: The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS: Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples (8 × 8 × 1 mm) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (α=.05). RESULTS: The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (P<.05). Staining resistances of E and CS were significantly higher than those of L and ME (P<.05). CONCLUSION: Ceramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics.
ABSTRACT
In this study, anaerobic treatability and biogas generation potential of broiler and cattle manure were investigated. For this purpose, seven sets of anaerobic batch reactor experiments were performed using broiler and cattle manure and their mixtures in five different ratios (100% broiler; 75% broiler, 25% cattle; 50% broiler, 50% cattle; 25% broiler, 75% cattle; 100% cattle). These manure mixtures had two different initial chemical oxygen demand (COD) (12,000 and 53,500 mg/l) concentrations. The effects of initial COD concentration, nutrient and trace metal supplementation, microbial acclimation and digestion temperature were investigated. Results revealed that the efficiency of total COD removal was 32.0-43.3% and 37.9-50% for initial COD concentrations of 12,000 and 53,500 mg/l, respectively. The biogas yields observed for initial COD concentrations of 12,000 and 53,500 mg/l were 180-270 and 223-368 ml gas/g COD added, respectively. A decrease in biogas yield was observed as the fraction of broiler manure increased in mixture of broiler and cattle manure at initial COD values of 53,500 mg/l.
