Magnetically Controllable Paper-Based Soft Robots for Colorimetric Detection of Heavy Metal Ions.

Magnetically controllable soft robots are of great interest because they have unique properties compared with conventional rigid counterparts and can be used in diverse applications such as intelligent electronics, bionics, personalized medicine, and cargo grasping. However, the fabrication of such multifunctional soft robots has been challenging because of the integration of dissimilar materials into the robot body. Herein, we designed and fabricated a soft robotic multifunctional system using conventional papers and elastomeric polymers for the colorimetric detection of heavy metal ions (Hg2+ and Fe3+) in water samples. The magnetic actuation of the platforms was shown to correlate with the type of underlying paper and magnetic particle content in the mixtures. Moreover, it was observed that actuation can also be manipulated by controlling the magnetic field strength. A proof-of-concept robotic paper-based Hg2+, Zn2+, and Fe3+ ion detection was demonstrated by combining colorimetric paper sensors and magneto-papers. Our study highlights the significant potential of paper as a material for the fabrication of effective and multifunctional untethered soft robots.

Toward Water and Oil Repellent Coating: Synthesis of Fluorinated Methacrylate-Glycidyl Methacrylate Copolymers.

The development of durable and eco-friendly coatings with excellent adhesion and remarkable surface properties remains a critical pursuit in various industries. This study introduces an innovative methodology for the synthesis of glycidyl methacrylate-co-fluorinated methacrylate (P(GMA-co-FMA)) random copolymers with variable fluorine contents derived from GMA and FMA monomers. The copolymerization of these constituents yields coatings with enhanced durability and unique surface characteristics. Particularly, the incorporation of FMA introduces novel surface functionalities, leading to high water and oil repellent properties. The copolymer-coated surfaces exhibited impressive water contact angles ranging from 105° to 125° and decane contact angles ranging from 50° to 85°. The wettability of the P(GMA-co-FMA) coatings demonstrated a strong dependence on the fluorine content in the copolymers, with higher fluorine content resulting in superior water and oil repellency. Through a comprehensive characterization, we demonstrate the exceptional adhesion and self-cleaning capabilities of the fabricated films. Notably, the self-cleaning efficacy of P(GMA-co-FMA)-coated surfaces persists even following a prolonged duration of 6 months. Furthermore, our investigation reveals the influence of copolymer composition on surface wettability and contact angle hysteresis, providing valuable insights for tailoring coating properties. Overall, the novelty of this study lies in the synthesis of P(GMA-co-FMA) copolymer coatings with superior adhesion and self-cleaning properties. These advancements present promising applications in various fields, including electronics, textiles, and medical supplies, where such durable and functional coatings can significantly enhance product performance and longevity.

Light- and Solvent-Responsive Bilayer Hydrogel Actuators with Reversible Bending Behaviors.

Light-responsive hydrogel systems have gained significant attention due to their unique ability to undergo controlled and reversible swelling behavior in response to light stimuli. Combining light-responsive hydrogels with nonresponsive polymers offers a unique self-folding feature that can be used in soft robotic actuator designs. However, simple formulation of such systems with rapid response time is still a challenging task. Herein, we demonstrate a simple but versatile bilayer polymeric design combining light-responsive spiropyran-polyacrylamide (SP-PAAm) with polyacrylamide (PAAm) hydrogels. The photochromic spiropyran in our polymer design is a closed-ring, hydrophobic compound and turns into an open-ring, hydrophilic merocyanine isomer under light irradiation. The swelling degree of SP-PAAm and PAAm hydrogels was evaluated using LED lights with different wavelengths and solvent media (e.g., water, ethanol, DMF, and DMSO). We observed that SP-PAAm hydrogels reached a swelling ratio of ∼370% with the illumination of the blue LED in the DMF medium. By combining light-responsive SP-PAAm hydrogels with nonresponsive PAAm, a proof-of-concept demonstration was performed to demonstrate the applicability of our fabricated platforms. Although fabricated one-armed bilayer hydrogels possessed self-folding ability with a folding angle of ∼40° in 30 min, the four-armed bilayer platforms demonstrated more efficient and rapid folding behavior and reached a folding angle of ∼75° in ∼15 min. Given their simplicity and efficiency, we believe that such polymeric designs may offer new avenues for the fields of polymeric actuators and soft robotic systems.

Solution-Processable Indenofluorenes on Polymer Brush Interlayer: Remarkable N-Channel Field-Effect Transistor Characteristics under Ambient Conditions.

The development of solution-processable n-type molecular semiconductors that exhibit high electron mobility (µe ≥ 0.5 cm2/(V·s)) under ambient conditions, along with high current modulation (Ion/Ioff ≥ 106-107) and near-zero turn on voltage (Von) characteristics, has lagged behind that of other semiconductors in organic field-effect transistors (OFETs). Here, we report the design, synthesis, physicochemical and optoelectronic characterizations, and OFET performances of a library of solution-processable, low-LUMO (-4.20 eV) 2,2'-(2,8-bis(3-alkylthiophen-2-yl)indeno[1,2-b]fluorene-6,12-diylidene)dimalononitrile small molecules, ß,ß'-Cn-TIFDMTs, having varied alkyl chain lengths (n = 8, 12, 16). An intriguing correlation is identified between the solid-isotropic liquid transition enthalpies and the solubilities, indicating that cohesive energetics, which are tuned by alkyl chains, play a pivotal role in determining solubility. The semiconductors were spin-coated under ambient conditions on densely packed (grafting densities of 0.19-0.45 chains/nm2) ultrathin (∼3.6-6.6 nm) polystyrene-brush surfaces. It is demonstrated that, on this polymer interlayer, thermally induced dispersive interactions occurring over a large number of methylene units between flexible alkyl chains (i.e., zipper effect) are critical to achieve a favorable thin-film crystallization with a proper microstructure and morphology for efficient charge transport. While C8 and C16 chains show a minimal zipper effect upon thermal annealing, C12 chains undergo an extended interdigitation involving ∼6 methylene units. This results in the formation of large crystallites having lamellar stacking ((100) coherence length ∼30 nm) in the out-of-plane direction and highly favorable in-plane π-interactions in a slipped-stacked arrangement. Uninterrupted microstructural integrity (i.e., no face-on (010)-oriented crystallites) was found to be critical to achieving high mobilities. The excellent crystallinity of the C12-substituted semiconductor thin film was also evident in the observed crystal lattice vibrations (phonons) at 58 cm-1 in low-frequency Raman scattering. Two-dimensional micrometer-sized (∼1-3 µm), sharp-edged plate-like grains lying parallel with the substrate plane were observed. OFETs fabricated by the current small molecules showed excellent n-channel behavior in ambient with µe values reaching ∼0.9 cm2/(V·s), Ion/Ioff ∼ 107-108, and Von ≈ 0 V. Our study not only demonstrates one of the highest performing n-channel OFET devices reported under ambient conditions via solution processing but also elucidates significant relationships among chemical structures, molecular properties, self-assembly from solution into a thin film, and semiconducting thin-film properties. The design rationales presented herein may open up new avenues for the development of high-electron-mobility novel electron-deficient indenofluorene and short-axis substituted donor-acceptor π-architectures via alkyl chain engineering and interface engineering.

Enabling three-dimensional porous architectures via carbonyl functionalization and molecular-specific organic-SERS platforms.

Molecular engineering via functionalization has been a great tool to tune noncovalent intermolecular interactions. Herein, we demonstrate three-dimensional highly crystalline nanostructured D(C7CO)-BTBT films via carbonyl-functionalization of a fused thienoacene π-system, and strong Raman signal enhancements in Surface-Enhanced Raman Spectroscopy (SERS) are realized. The small molecule could be prepared on the gram scale with a facile synthesis-purification. In the engineered films, polar functionalization induces favorable out-of-plane crystal growth via zigzag motif of dipolar C = O···C = O interactions and hydrogen bonds, and strengthens π-interactions. A unique two-stage film growth behavior is identified with an edge-on-to-face-on molecular orientation transition driven by hydrophobicity. The analysis of the electronic structures and the ratio of the anti-Stokes/Stokes SERS signals suggests that the π-extended/stabilized LUMOs with varied crystalline face-on orientations provide the key properties in the chemical enhancement mechanism. A molecule-specific Raman signal enhancement is also demonstrated on a high-LUMO organic platform. Our results demonstrate a promising guidance towards realizing low-cost SERS-active semiconducting materials, increasing structural versatility of organic-SERS platforms, and advancing molecule-specific sensing via molecular engineering.

Molecular engineering of organic semiconductors enables noble metal-comparable SERS enhancement and sensitivity.

Nanostructured molecular semiconductor films are promising Surface-Enhanced Raman Spectroscopy (SERS) platforms for both fundamental and technological research. Here, we report that a nanostructured film of the small molecule DFP-4T, consisting of a fully π-conjugated diperfluorophenyl-substituted quaterthiophene structure, demonstrates a very large Raman enhancement factor (>105) and a low limit of detection (10-9 M) for the methylene blue probe molecule. This data is comparable to those reported for the best inorganic semiconductor- and even intrinsic plasmonic metal-based SERS platforms. Photoluminescence spectroscopy and computational analysis suggest that both charge-transfer energy and effective molecular interactions, leading to a small but non-zero oscillator strength in the charge-transfer state between the organic semiconductor film and the analyte molecule, are required to achieve large SERS enhancement factors and high molecular sensitivities in these systems. Our results provide not only a considerable experimental advancement in organic SERS figure-of-merits but also a guidance for the molecular design of more sensitive SERS systems.

Asymmetric, nano-textured surfaces influence neuron viability and polarity.

Three dimensional, nanostructured surfaces have attracted considerable attention in biomedical research since they have proven to represent a powerful platform to influence cell fate. In particular, nanorods and nanopillars possess great potential for the control of cell adhesion and differentiation, gene and biomolecule delivery, optical and electrical stimulation and recording, as well as cell patterning. Here, we investigate the influence of asymmetric poly(dichloro-p-xylene) (PPX) columnar films on the adhesion and maturation of cortical neurons. We show that nanostructured films with dense, inclined polymer columns can support viable primary neuronal culture. The cell-nanostructure interface is characterized showing a minimal cell penetration but strong adhesion on the surface. Moreover, we quantify the influence of the nano-textured surface on the neural development (soma size, neuritogenesis, and polarity) in comparison to a planar PPX sample. We demonstrate that the nanostructures facilitates an enhancement in neurite branching as well as elongation of axons and growth cones. Furthermore, we show for the first time that the asymmetric orientation of polymeric nanocolumns strongly influences the initiation direction of the axon formation. These results evidence that 3D nano-topographies can significantly change neural development and can be used to engineer axon elongation. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1634-1645, 2018.

Fabrication of Plasmonically Active Substrates Using Engineered Silver Nanostructures for SERS Applications.

Demanding applications in sensing, metasurfaces, catalysis, and biotechnology require fabrication of plasmonically active substrates. Herein, we demonstrate a bottom-up, versatile, and scalable approach that relies on direct growth of silver nanostructures from seed particles that were immobilized on polymer brush-grafted substrates. Our approach is based on (i) the uniform and tunable assembly of citrate-stabilized gold nanoparticles on poly(ethylene glycol) brushes to serve as seeds and (ii) the use of hydroquinone as a reducing agent, which is extremely selective to the presence of seed particles, confining the growth of silver nanostructures on the surface of the substrate. The diameter of the seed particles, concentration, as well as ratio of reactants and duration of the growth process are investigated for large-area growth of silver nanostructures with high surface coverage and plasmonic activity. The resulting silver nanostructures exhibit high levels of surface-enhanced Raman scattering activity at two different laser lines and allow detection of molecules at concentrations as low as 10 pM. The plasmonic properties of the silver nanostructures are further studied using ultrafast pump-probe spectroscopy. Spatially defined silver nanostructures are fabricated through the seed particles that are patterned via soft lithography, showing the capabilities of the presented approach in device applications.

Nanostructured organic semiconductor films for molecular detection with surface-enhanced Raman spectroscopy.

π-Conjugated organic semiconductors have been explored in several optoelectronic devices, yet their use in molecular detection as surface-enhanced Raman spectroscopy (SERS)-active platforms is unknown. Herein, we demonstrate that SERS-active, superhydrophobic and ivy-like nanostructured films of a molecular semiconductor, α,ω-diperfluorohexylquaterthiophene (DFH-4T), can be easily fabricated by vapour deposition. DFH-4T films without any additional plasmonic layer exhibit unprecedented Raman signal enhancements up to 3.4 × 103 for the probe molecule methylene blue. The combination of quantum mechanical computations, comparative experiments with a fluorocarbon-free α,ω-dihexylquaterthiophene (DH-4T), and thin-film microstructural analysis demonstrates the fundamental roles of the π-conjugated core fluorocarbon substitution and the unique DFH-4T film morphology governing the SERS response. Furthermore, Raman signal enhancements up to ∼1010 and sub-zeptomole (<10-21 mole) analyte detection were accomplished by coating the DFH-4T films with a thin gold layer. Our results offer important guidance for the molecular design of SERS-active organic semiconductors and easily fabricable SERS platforms for ultrasensitive trace analysis.

Three-Dimensional Au-Coated Electrosprayed Nanostructured BODIPY Films on Aluminum Foil as Surface-Enhanced Raman Scattering Platforms and Their Catalytic Applications.

The design and development of three-dimensional (3D) nanostructures with high surface-enhanced Raman scattering (SERS) performances have attracted considerable attention in the fields of chemistry, biology, and materials science. Nevertheless, electrospraying of organic small molecules on low-cost flexible substrates has never been studied to realize large-scale SERS-active platforms. Here, we report the facile, efficient, and low-cost fabrication of stable and reproducible Au-coated electrosprayed organic semiconductor films (Au@BDY-4T-BDY) on flexible regular aluminum foil at a large scale (5 cm × 5 cm) for practical SERS and catalytic applications. To this end, a well-designed acceptor-donor-acceptor-type solution-processable molecular semiconductor, BDY-4T-BDY, developed by our group, is used because of its advantageous structural and electrical properties. The morphology of the electrosprayed organic film changes by solution concentration, and two different 3D morphologies with out-of-plane features are obtained. Highly uniform dendritic nanoribbons with sharp needle-like tips and vertically oriented nanoplates (∼50 nm thickness) are achieved when electrospraying solution concentrations of 240 and 253% w/v (mg/mL) are, respectively, used. When these electrosprayed organic films are coated with a nanoscopic thin (30 nm) Au layer, the resulting Au@BDY-4T-BDY platforms demonstrate remarkable SERS enhancement factors up to 1.7 × 106 with excellent Raman signal reproducibility (relative standard deviation ≤ 0.13) for methylene blue over the entire film. Finally, Au@BDY-4T-BDY films showed good catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol with rate constants of 1.3 × 10-2 and 9.2 × 10-3 min-1. Our results suggest that electrospraying of rationally designed organic semiconductor molecules on flexible substrates holds great promise to enable low-cost, solution-processed, SERS-active platforms.

Fabrication of Plasmonic Nanorod-Embedded Dipeptide Microspheres via the Freeze-Quenching Method for Near-Infrared Laser-Triggered Drug-Delivery Applications.

Control of drug release by an external stimulus may provide remote controllability, low toxicity, and reduced side effects. In this context, varying physical external stimuli, including magnetic and electric fields, ultrasound, light, and pharmacological stimuli, have been employed to control the release rate of drug molecules in a diseased region. However, the design and development of alternative on-demand drug-delivery systems that permit control of the dosage of drug released via an external stimulus are still required. Here, we developed near-infrared laser-activatable microspheres based on Fmoc-diphenylalanine (Phe-Phe) dipeptides and plasmonic gold nanorods (AuNRs) via a simple freeze-quenching approach. These plasmonic nanoparticle-embedded microspheres were then employed as a smart drug-delivery platform for native, continuous, and pulsatile doxorubicin (DOX) release. Remarkable sustained, burst, and on-demand DOX release from the fabricated microspheres were achieved by manipulating the laser exposure time. Our results demonstrate that AuNR-embedded dipeptide microspheres have great potential for controlled drug-delivery systems.

Morphological Versatility in the Self-Assembly of Val-Ala and Ala-Val Dipeptides.

Since the discovery of dipeptide self-assembly, diphenylalanine (Phe-Phe)-based dipeptides have been widely investigated in a variety of fields. Although various supramolecular Phe-Phe-based structures including tubes, vesicles, fibrils, sheets, necklaces, flakes, ribbons, and wires have been demonstrated by manipulating the external physical or chemical conditions applied, studies of the morphological diversity of dipeptides other than Phe-Phe are still required to understand both how these small molecules respond to external conditions such as the type of solvent and how the peptide sequence affects self-assembly and the corresponding molecular structures. In this work, we investigated the self-assembly of valine-alanine (Val-Ala) and alanine-valine (Ala-Val) dipeptides by varying the solvent medium. It was observed that Val-Ala dipeptide molecules may generate unique self-assembly-based morphologies in response to the solvent medium used. Interestingly, when Ala-Val dipeptides were utilized as a peptide source instead of Val-Ala, we observed distinct differences in the final dipeptide structures. We believe that such manipulation may not only provide us with a better understanding of the fundamentals of the dipeptide self-assembly process but also may enable us to generate novel peptide-based materials for various applications.

Vapor-phase deposition of polymers as a simple and versatile technique to generate paper-based microfluidic platforms for bioassay applications.

Given their simplicity and functionality, paper-based microfluidic systems are considered to be ideal and promising bioassay platforms for use in less developed countries or in point-of-care services. Although a series of innovative techniques have recently been demonstrated for the fabrication of such platforms, development of simple, inexpensive and versatile new strategies are still needed in order to reach their full potential. In this communication, we describe a simple yet facile approach to fabricate paper-based sensor platforms with a desired design through a vapor-phase polymer deposition technique. We also show that the fabricated platforms could be readily employed for the detection of various biological target molecules including glucose, protein, ALP, ALT, and uric acid. The limit of detection for each target molecule was calculated to be 25 mg dL(-1) for glucose, 1.04 g L(-1) for protein, 7.81 unit per L for ALP, 1.6 nmol L(-1) for ALT, and 0.13 mmol L(-1) for uric acid.

Combining 3-D plasmonic gold nanorod arrays with colloidal nanoparticles as a versatile concept for reliable, sensitive, and selective molecular detection by SERS.

The detection of molecules at an ultralow level by Surface-Enhanced Raman Spectroscopy (SERS) has recently attracted enormous interest for various applications especially in biological, medical, and environmental fields. Despite the significant progress, SERS systems are still facing challenges for practical applications related to their sensitivity, reliability, and selectivity. To overcome these limitations, in this study, we have proposed a simple yet facile concept by combining 3-D anisotropic gold nanorod arrays with colloidal gold nanoparticles having different shapes for highly reliable, selective, and sensitive detection of some hazardous chemical and biological warfare agents in trace amounts through SERS. The gold nanorod arrays were created on the BK7 glass slides or silicon wafer surfaces via the oblique angle deposition (OAD) technique without using any template material or lithography technique and their surface densities were adjusted by manipulating the deposition angle (α). It is found that gold nanorod arrays fabricated at α = 10° exhibited the highest SERS enhancement in the absence of colloidal gold nanoparticles. Synergetic enhancement was obviously observed in SERS signals when combining gold nanorod arrays with colloidal gold nanoparticles having different shapes (i.e., spherical, rod, and cage). Due to their ability to produce localized surface plasmons (LSPs) in transverse and longitudinal directions, utilization of colloidal gold nanorods as a synergetic agent led to an increase in the enhancement factor by about tenfold compared to plain gold nanorod arrays. Moreover, we have tested our approach to detect some chemical and biological toxins namely dipicolinic acid (DIP), methyl parathion (MP), and diethyl phosphoramidate (DP). For all toxins, Raman spectra with high signal-to-noise ratios and reproducibility were successfully obtained over a broad concentration range (5 ppm-10 ppb). Our results suggest that the slightly tangled and closely-packed anisotropic gold nanorod arrays reinforced by the gold nanoparticles may serve as an ideal SERS substrate to detect any analyte in trace amounts.

Large area uniform deposition of silver nanoparticles through bio-inspired polydopamine coating on silicon nanowire arrays for practical SERS applications.

Despite the significant progress, the controlled deposition of nanoparticles onto the support materials having 3-D nano-morphologies is still facing challenges due to the limited diffusion of metal ions into the nanostructures and uncontrolled aggregation of nanoparticles. In this study, a simple yet versatile alternative is demonstrated to control the silver nanoparticle (AgNP) density and morphology onto the 3-D silicon nanowire (SiNW) arrays based on bio-inspired polydopamine (PDOP) coating and electroless plating approaches for practical Surface-Enhanced Raman Spectroscopy (SERS) applications. In order to control silver deposition and its morphology and to optimize the SERS performance of AgNP decorated SiNW arrays, the effect of some key experimental parameters including SiNW length and morphology, silver reduction time and PDOP thickness are investigated in detail. The optimized samples demonstrate remarkable surface-enhancement ability in Raman signals with high reproducibility (lower than ∼10% spot-to-spot and sample-to-sample). Interestingly, it is found that PDOP coating not only serves as a reducing agent for the deposition of AgNPs on SiNW arrays in a controlled manner, but also contributes to the observed SERS enhancements in terms of improving photon scattering and promoting electron transfer processes due to its organic semiconductor nature.

One-dimensional surface-imprinted polymeric nanotubes for specific biorecognition by initiated chemical vapor deposition (iCVD).

Molecular imprinting is a powerful, generic, and cost-effective technique; however, challenges still remain related to the fabrication and development of these systems involving nonhomogeneous binding sites, insufficient template removing, incompatibility with aqueous media, low rebinding capacity, and slow mass transfer. The vapor-phase deposition of polymers is a unique technique because of the conformal nature of coating and offers new possibilities in a number of applications including sensors, microfluidics, coating, and bioaffinity platforms. Herein, we demonstrated a simple but versatile concept to generate one-dimensional surface-imprinted polymeric nanotubes within anodic aluminum oxide (AAO) membranes based on initiated chemical vapor deposition (iCVD) technique for biorecognition of immunoglobulin G (IgG). It is reported that the fabricated surface-imprinted nanotubes showed high binding capacity and significant specific recognition ability toward target molecules compared with the nonimprinted forms. Given its simplicity and universality, the iCVD method can offer new possibilities in the field of molecular imprinting.

Bioinspired surface modification of poly(2-hydroxyethyl methacrylate) based microbeads via oxidative polymerization of dopamine.

Surface modification of support materials is crucial for improving their selectivities and biocompatibilities in bioaffinity applications. However, conventional modification techniques including chemical or physical conjugations mostly suffer from limitations of their multistep and complicated procedures, surface denaturations, batch-to-batch inconsistencies, and insufficient surface conjugations. In this study, we demonstrate a simple yet effective bioinspired approach for the surface modification of poly(2-hydroxyethyl methacrylate) [PHEMA] based bioaffinity adsorbents through oxidative polymerization of dopamine. The magnetic (mPHEMA) and non-magnetic (PHEMA) polymeric microbeads were fabricated by suspension polymerization technique. Surface modification of obtained microbeads was then carried out by using dopamine molecules under alkaline conditions. The polydopamine (PDOPA) coated microbeads were further employed as a bioaffinity absorbent targeted for immunoglobulin G (IgG) molecules. The effects of pH, temperature, protein concentration and ionic strength on the IgG adsorption process have been investigated. We found that PDOPA coated microbeads display dramatically higher IgG adsorption capacities when compared with their un-modified forms. Adsorption capacities also increased with increasing temperature. Monolayer Langmuir adsorption model can be thought more applicable for these adsorbent systems.

Laser-triggered degelation control of gold nanoparticle embedded peptide organogels.

Further understanding of the interactions between nanoparticles (NPs) and biological molecules offers new possibilities in the applications of nanomedicine and nanodiagnostics. The properties of NPs, including size, shape, and surface functionality, play a decisive role in these interactions. Herein, we evaluated the influences of gold NPs (AuNPs) with different sizes (5-60 nm) and shapes (i.e., spherical, rod, and cage) on the self-assembly of diphenylalanine (Phe-Phe) dipeptides. We found that the size of AuNPs smaller than 10 nm did not affect the self-assembly process of Phe-Phe, while bigger AuNPs (>10 nm) caused the formation of starlike peptide morphologies connected to one center. In the case of shape differences, nanorod and nanocage morphologies acted differently than spherical ones and caused the formation of densely packed, networklike dipeptide morphologies. In addition to these experiments, by combining photothermal properties of AuNPs with a Phe-Phe-based organogel having a thermo-responsive property, we demonstrated that the degelation process of AuNPs embedded organogels may be controlled by laser illumination. Complete degelation was achieved in about 10 min. We believe that such control may open the door to new opportunities for a number of applications, such as controlled release of drugs and tissue engineering.

Core-shell magnetic nanoparticles: a comparative study based on silica and polydopamine coating for magnetic bio-separation platforms.

Core-shell magnetic nanoparticles (MNPs) offer tremendous opportunities in a large range of applications in biomedicine due to their superior magnetic properties, biocompatibility and suitability for modification. In most cases, these characteristic features are determined by their shell chemistry and morphology. Herein, we demonstrate a comparative study of silica and polydopamine (PDOP) coating onto MNP surfaces based on synthesis, characterization and usage in a bio-separation platform. It was found that monodispersed MNPs may be easily obtained on silica coating of varying shell thickness, whereas a continuous PDOP layer observed around the MNPs prevents the formation of the dispersed form. On the other hand, PDOP coated MNPs exhibited better superparamagnetic behavior and biological modification ability compared to the silica coated form.

Small molecule analysis using laser desorption/ionization mass spectrometry on nano-coated silicon with self-assembled monolayers.

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is an emerging technique for the determination of the molecular weight of biomolecules and their non-covalent complexes without fragmentation. One problem with this technique is the use of excess amounts of matrices, which may produce intense fragment ions and/or clusters at low mass ranges between 1 and 800 Da. These fragments lead to interference, especially concerning the signals of small target molecules. Here, a simple, reusable, and quite inexpensive approach was demonstrated to improve the effectiveness of laser desorption/ionization mass spectrometry (LDI-MS) analysis, especially for small molecules, without using matrix molecules. In this study, substrates with controllable morphologies and thicknesses were developed based on the self-assembly of silane molecules on silicon surfaces using N-(3-trimethoxysilylpropyl)diethylenetriamine (TPDA) and octadecyltrichlorosilane (OTS) molecules. Prepared substrates with nano-overlayers were successfully used in the analysis of different types of small target molecules, namely acrivastine, L-histidine, L-valine, L-phenylalanine, L-arginine, L-methionine and angiotensin I. Our substrates exhibited clear peaks almost without fragmentation for all target molecules, suggesting that these surfaces provide a number of important advantages for LDI-MS analysis, such as ease of preparation, costs, reusability, robustness, easy handling and preventing fragmentation.