Cephalopod inspired self-healing protein foams for oil-water separation.

Cephalopods are remarkable creatures, captivating scientists with their advanced neurophysiology, complex behavior, and miraculously effective camouflage. Research into cephalopods has led to many discoveries in neuroscience, cell biology, and materials science. Specifically, squids provide us with remarkable self-healing Squid Ring Teeth protein, which is applied herein to extend the life span of foams. Despite the advantages of porosity in surface science applications, porosity impairs mechanical properties by making materials more prone to structural damage -which traditional polymeric foams also suffer from. Drawing inspiration from Squid Ring Teeth, we developed self-healing tandem repeat proteins to overcome these challenges. By leveraging porosity and self-healing properties inspired by Squid Ring Teeth, we created bioengineered protein foams with high separation capacity (5.1 g g-1) and efficiency (≈94%). The foams healed entirely within minutes which regained over 100% strength after repair. These advances promise applications for efficient continuous water treatment through durable filter cartridges.

Bioinspired stretchable molecular composites of 2D-layered materials and tandem repeat proteins.

Protein based composites, such as nacre and bone, show astounding evolutionary capabilities, including tunable physical properties. Inspired by natural composites, we studied assembly of atomistically thin inorganic sheets with genetically engineered polymeric proteins to achieve mechanically compliant and ultra-tough materials. Although bare inorganic nanosheets are brittle, we designed flexible composites with proteins, which are insensitive to flaws due to critical structural length scale (∼2 nm). These proteins, inspired by squid ring teeth, adhere to inorganic sheets via secondary structures (i.e., ß-sheets and α-helices), which is essential for producing high stretchability (59 ± 1% fracture strain) and toughness (54.8 ± 2 MJ/m3). We find that the mechanical properties can be optimized by adjusting the protein molecular weight and tandem repetition. These exceptional mechanical responses greatly exceed the current state-of-the-art stretchability for layered composites by over a factor of three, demonstrating the promise of engineering materials with reconfigurable physical properties.

Diffusive Dynamic Modes of Recombinant Squid Ring Teeth Proteins by Neutron Spectroscopy.

Stimuli-responsive structural proteins are emerging as promising biocompatible materials for a wide range of biological and nonbiological applications. To understand the physical properties of structural proteins and to replicate their performance in biosynthetic systems, there is a need to understand the molecular mechanisms and relationships that regulate their structure, dynamics, and properties. Here, we study the dynamics of a recombinant squid-inspired protein from Loligo vulgaris (Lv18) by elastic and quasielastic neutron scattering (QENS) to understand the connection between nanostructure, chain dynamics, and mechanical properties. Lv18 is a semicrystalline structural protein, which is plasticized by water above its glass transition temperature at 35 °C. Elastic scans revealed an increased protein chain mobility upon hydration, superimposed dynamic processes, and a decrease in dynamic transition temperatures. Further analysis by QENS revealed that while dry Lv18 protein dynamics are dominated by localized methyl group rotations, hydrated Lv18 dynamics are dominated by the confined diffusion of flexible chains within a ß-sheet nanocrystalline network (8 Å of confinement radius). Our findings establish a relationship between the segment block architecture of Lv18, the diffusive motions within the protein structure, and the mechanical properties of recombinant squid proteins, which will advance the molecular design of novel high-performance protein-inspired materials with tailored dynamics and mechanical properties.

Hydration-Induced Structural Transitions in Biomimetic Tandem Repeat Proteins.

A major challenge in developing biomimetic, high-performance, and sustainable products is the accurate replication of the biological materials' striking properties, such as high strength, self-repair, and stimuli-responsiveness. The rationalization of such features on the microscopic scale, together with the rational design of synthetic materials, is currently hindered by our limited understanding of the sequence-structure-property relationship. Here, employing state-of-the-art nuclear magnetic resonance (NMR) spectroscopy, we link the atomistic structural and dynamic properties of an artificial bioinspired tandem repeat protein TR(1,11) to its stunning macroscopic properties including high elasticity, self-healing capabilities, and record-holding proton conductivity among biological materials. We show that the hydration-induced structural rearrangement of the amorphous Gly-rich soft segment and the ordered Ala-rich hard segment is the key to the material's outstanding physical properties. We found that in the hydrated state both the Ala-rich ordered and Gly-rich disordered parts contribute to the formation of the nanoconfined ß-sheets, thereby enhancing the strength and toughness of the material. This restructuring is accompanied by fast proline ring puckering and backbone cis-trans isomerization at the water-protein interface, which in turn enhances the elasticity and the thermal conductivity of the hydrated films. Our in-depth characterization provides a solid ground for the development of next-generation materials with improved properties.

Biosynthetic self-healing materials for soft machines.

Self-healing materials are indispensable for soft actuators and robots that operate in dynamic and real-world environments, as these machines are vulnerable to mechanical damage. However, current self-healing materials have shortcomings that limit their practical application, such as low healing strength (below a megapascal) and long healing times (hours). Here, we introduce high-strength synthetic proteins that self-heal micro- and macro-scale mechanical damage within a second by local heating. These materials are optimized systematically to improve their hydrogen-bonded nanostructure and network morphology, with programmable healing properties (2-23 MPa strength after 1 s of healing) that surpass by several orders of magnitude those of other natural and synthetic soft materials. Such healing performance creates new opportunities for bioinspired materials design, and addresses current limitations in self-healing materials for soft robotics and personal protective equipment.

Self-Assembly of Topologically Networked Protein-Ti3C2Tx MXene Composites.

Hierarchical organization plays an important role in the stunning physical properties of natural and synthetic composites. Limits on the physical properties of such composites are generally defined by percolation theory and can be systematically altered using the volumetric filler fraction of the inorganic/organic phase. In natural composites, organic materials such as proteins that interact with inorganic filler materials can further alter the hierarchical order and organization of the composite via topological interactions, expanding the limits of the physical properties defined by percolation theory. However, existing polymer systems do not offer a topological parameter that can systematically modulate the assembly characteristics of composites. Here, we present a composite based on proteins and titanium carbide (Ti3C2Tx) MXene that manifests a topological network that regulates the organization, and hence physical properties, of these biomimetic composites. We designed, recombinantly expressed, and purified synthetic proteins consisting of polypeptides with repeating amino acid sequences (tandem repeats) that have the ability to self-assemble into topologically networked biomaterials. We demonstrated that the interlayer distance between MXene sheets can be controlled systematically by the number of tandem repeat units. We varied the filler fraction and number of tandem repeat units to regulate the in-plane and out-of-plane electrical conductivities of these composites. Once Ti3C2Tx MXene sheets are separated enough to facilitate formation of cross-links in our proteins with the number of tandem repeat units reaching 11, the linear I-V characteristics of the composites switched into nonlinear I-V curves with a distinct hysteresis for out-of-plane electron transport, while the in-plane I-V characteristics remained linear. This highlights the impact of synthetic protein templates, which can be designed to modulate electronic transport in composites both isotropically and anisotropically.

Highly Conductive Self-Healing Biocomposites Based on Protein Mediated Self-Assembly of PEDOT:PSS Films.

Composites of conducting polymers offer a broad spectrum of materials for interfacing electronic devices with biological systems. Particularly, material systems based on poly(styrenesulfonate) doped poly(3,4-ethylenedioxythiophene) (PEDOT:PSS) have found applications in many bioelectronic devices as biosensitive transistors, controlled drug delivery media, and strain, temperature, and humidity sensors. The biocompatibility, intercoupled electronic and ionic conductivity, and air stable electrical properties render PEDOT:PSS based material systems indispensable for bioelectronics. However, these materials are commonly used in thin film form since freestanding films of pristine PEDOT:PSS are considered mechanically brittle compared to biological tissues, and unlike biological systems these conductive films cannot restore/heal their physical properties after excessive mechanical deformation. Here we report conductive biocomposites of PEDOT:PSS and tandem repeat proteins with the ability to self-heal once plasticized via water. The tandem repeat proteins acquired from squid ring teeth (SRT) induce structural effects on PEDOT:PSS including improved crystallinity and formation of fibrous network structures. These structural effects lead to electrical conductivity values reaching 120 S/cm for biocomposites with SRT protein concentrations below 20 wt %, which exceeds the conductivity of pristine PEDOT:PSS (∼100 S/cm). More importantly, tandem proteins facilitate consistent self-healing of freestanding biocomposites with SRT protein concentrations beyond 40 wt %. These robust biocomposites with high electrical conductivity and the ability to self-heal can find applications in numerous soft electronic systems spanning from implantable, transient, and epidermal electronics to electronic textiles.

Squid-Inspired Tandem Repeat Proteins: Functional Fibers and Films.

Production of repetitive polypeptides that comprise one or more tandem copies of a single unit with distinct amorphous and ordered regions have been an interest for the last couple of decades. Their molecular structure provides a rich architecture that can micro-phase-separate to form periodic nanostructures (e.g., lamellar and cylindrical repeating phases) with enhanced physicochemical properties via directed or natural evolution that often exceed those of conventional synthetic polymers. Here, we review programmable design, structure, and properties of functional fibers and films from squid-inspired tandem repeat proteins, with applications in soft photonics and advanced textiles among others.

Squid Ring Teeth-coated Mesh Improves Abdominal Wall Repair.

BACKGROUND: Hernia repair is a common surgical procedure with polypropylene (PP) mesh being the standard material for correction because of its durability. However, complications such as seroma and pain are common, and repair failures still approach 15% secondary to poor tissue integration. In an effort to enhance mesh integration, we evaluated the applicability of a squid ring teeth (SRT) protein coating for soft-tissue repair in an abdominal wall defect model. SRT is a biologically derived high-strength protein with strong mechanical properties. We assessed tissue integration, strength, and biocompatibility of a SRT-coated PP mesh in a first-time pilot animal study. METHODS: PP mesh was coated with SRT (SRT-PP) and tested for mechanical strength against uncoated PP mesh. Cell proliferation and adhesion studies were performed in vitro using a 3T3 cell line. Rats underwent either PP (n = 3) or SRT-PP (n = 6) bridge mesh implantation in an anterior abdominal wall defect model. Repair was assessed clinically and radiographically, with integration evaluated by histology and mechanical testing at 60 days. RESULTS: Cell proliferation was enhanced on SRT-PP mesh. This was corroborated in vivo by abdominal wall histology, dramatically diminished craniocaudal mesh contraction, improved strength testing, and higher tissue failure strain. There was no increase in seroma or visceral adhesion formation. No foreign body reactions were noted on liver histology. CONCLUSIONS: SRT applied as a coating appears to augment mesh-tissue integration and improve abdominal wall stability following bridged repair. Further studies in larger animals will determine its applicability for hernia repair in patients.

Tunable thermal transport and reversible thermal conductivity switching in topologically networked bio-inspired materials.

The dynamic control of thermal transport properties in solids must contend with the fact that phonons are inherently broadband. Thus, efforts to create reversible thermal conductivity switches have resulted in only modest on/off ratios, since only a relatively narrow portion of the phononic spectrum is impacted. Here, we report on the ability to modulate the thermal conductivity of topologically networked materials by nearly a factor of four following hydration, through manipulation of the displacement amplitude of atomic vibrations. By varying the network topology, or crosslinked structure, of squid ring teeth-based bio-polymers through tandem-repetition of DNA sequences, we show that this thermal switching ratio can be directly programmed. This on/off ratio in thermal conductivity switching is over a factor of three larger than the current state-of-the-art thermal switch, offering the possibility of engineering thermally conductive biological materials with dynamic responsivity to heat.

3D Printing of PDMS Improves Its Mechanical and Cell Adhesion Properties.

Despite extensive use of polydimethylsiloxane (PDMS) in medical applications, such as lab-on-a-chip or tissue/organ-on-a-chip devices, point-of-care devices, and biological machines, the manufacturing of PDMS devices is limited to soft-lithography and its derivatives, which prohibits the fabrication of geometrically complex shapes. With the recent advances in three-dimensional (3D) printing, use of PDMS for fabrication of such complex shapes has gained considerable interest. This research presents a detailed investigation on printability of PDMS elastomers over three concentrations for mechanical and cell adhesion studies. The results demonstrate that 3D printing of PDMS improved the mechanical properties of fabricated samples up to three fold compared to that of cast ones because of the decreased porosity of bubble entrapment. Most importantly, 3D printing facilitates the adhesion of breast cancer cells, whereas cast samples do not allow cellular adhesion without the use of additional coatings such as extracellular matrix proteins. Cells are able to adhere and grow in the grooves along the printed filaments demonstrating that 3D printed devices can be engineered with superior cell adhesion qualities compared to traditionally manufactured PDMS devices.

Mechanical Properties of Tandem-Repeat Proteins Are Governed by Network Defects.

Topological defects in highly repetitive structural proteins strongly affect their mechanical properties. However, there are no universal rules for structure-property prediction in structural proteins due to high diversity in their repetitive modules. Here, we studied the mechanical properties of tandem-repeat proteins inspired by squid ring teeth proteins using rheology and tensile experiments as well as spectroscopic and X-ray techniques. We also developed a network model based on entropic elasticity to predict structure-property relationships for these proteins. We demonstrated that shear modulus, elastic modulus, and toughness scale inversely with the number of repeats in these proteins. Through optimization of structural repeats, we obtained highly efficient protein network topologies with 42 MJ/m3 ultimate toughness that are capable of withstanding deformations up to 350% when hydrated. Investigation of topological network defects in structural proteins will improve the prediction of mechanical properties for designing novel protein-based materials.

Ultrafast laser-probing spectroscopy for studying molecular structure of protein aggregates.

We report the development of a new technique to screen protein aggregation based on laser-probing spectroscopy with sub-picosecond resolution. Protein aggregation is an important topic for materials science, fundamental biology as well as clinical studies in neurodegenerative diseases and translation studies in biomaterials engineering. However, techniques to study protein aggregation and assembly are limited to infrared spectroscopy, fluorescent assays, immunostaining, or functional assays among others. Here, we report a new technique to characterize protein structure-property relationship based on ultrafast laser-probing spectroscopy. First, we show theoretically that the temperature dependence of the refractive index of a protein is correlated to its crystallinity. Then, we performed time-domain thermo-transmission experiments on purified semi-crystalline proteins, both native and recombinant (i.e., silk and squid ring teeth), and also on intact E. coli cells bearing overexpressed recombinant protein. Our results demonstrate, for the first time, relative quantification of crystallinity in real time for protein aggregates. Our approach can potentially be used for screening an ultra-large number of proteins in vivo. Using this technique, we could answer many fundamental questions in structural protein research, such as the underlying sequence-structure relationship for protein assembly and aggregation.

Self-Healing Textile: Enzyme Encapsulated Layer-by-Layer Structural Proteins.

Self-healing materials, which enable an autonomous repair response to damage, are highly desirable for the long-term reliability of woven or nonwoven textiles. Polyelectrolyte layer-by-layer (LbL) films are of considerable interest as self-healing coatings due to the mobility of the components comprising the film. In this work mechanically stable self-healing films were fabricated through construction of a polyelectrolyte LbL film containing squid ring teeth (SRT) proteins. SRTs are structural proteins with unique self-healing properties and high elastic modulus in both dry and wet conditions (>2 GPa) due to their semicrystalline architecture. We demonstrate LbL construction of multilayers containing native and recombinant SRT proteins capable of self-healing defects. Additionally, we show these films are capable of utilizing functional biomolecules by incorporating an enzyme into the SRT multilayer. Urease was chosen as a model enzyme of interest to test its activity via fluorescence assay. Successful construction of the SRT films demonstrates the use of mechanically stable self-healing coatings, which can incorporate biomolecules for more complex protective functionalities for advanced functional fabrics.

Molecular tandem repeat strategy for elucidating mechanical properties of high-strength proteins.

Many globular and structural proteins have repetitions in their sequences or structures. However, a clear relationship between these repeats and their contribution to the mechanical properties remains elusive. We propose a new approach for the design and production of synthetic polypeptides that comprise one or more tandem copies of a single unit with distinct amorphous and ordered regions. Our designed sequences are based on a structural protein produced in squid suction cups that has a segmented copolymer structure with amorphous and crystalline domains. We produced segmented polypeptides with varying repeat number, while keeping the lengths and compositions of the amorphous and crystalline regions fixed. We showed that mechanical properties of these synthetic proteins could be tuned by modulating their molecular weights. Specifically, the toughness and extensibility of synthetic polypeptides increase as a function of the number of tandem repeats. This result suggests that the repetitions in native squid proteins could have a genetic advantage for increased toughness and flexibility.

Remote calorimetric detection of urea via flow injection analysis.

The design and development of a calorimetric biosensing system enabling relatively high throughput sample analysis are reported. The calorimetric biosensor system consists of a thin (∼20 µm) micromachined Y-cut quartz crystal resonator (QCR) as a temperature sensor placed in close proximity to a fluidic chamber packed with an immobilized enzyme. Layer by layer enzyme immobilization of urease is demonstrated and its activity as a function of the number of layers, pH, and time has been evaluated. This configuration enables a sensing system where a transducer element is physically separated from the analyte solution of interest and is thereby free from fouling effects typically associated with biochemical reactions occuring on the sensor surface. The performance of this biosensing system is demonstrated by detection of 1-200 mM urea in phosphate buffer via a flow injection analysis (FIA) technique. Miniaturized fluidic systems were used to provide continuous flow through a reaction column. Under this configuration the biosensor has an ultimate resolution of less than 1 mM urea and showed a linear response between 0-50 mM. This work demonstrates a sensing modality in which the sensor itself is not fouled or contaminated by the solution of interest and the enzyme immobilized Kapton® fluidic reaction column can be used as a disposable cartridge. Such a system enables reuse and reliability for long term sampling measurements. Based on this concept a biosensing system is envisioned which can perform rapid measurements to detect biomarkers such as glucose, creatinine, cholesterol, urea and lactate in urine and blood continuously over extended periods of time.

Segmented molecular design of self-healing proteinaceous materials.

Hierarchical assembly of self-healing adhesive proteins creates strong and robust structural and interfacial materials, but understanding of the molecular design and structure-property relationships of structural proteins remains unclear. Elucidating this relationship would allow rational design of next generation genetically engineered self-healing structural proteins. Here we report a general self-healing and -assembly strategy based on a multiphase recombinant protein based material. Segmented structure of the protein shows soft glycine- and tyrosine-rich segments with self-healing capability and hard beta-sheet segments. The soft segments are strongly plasticized by water, lowering the self-healing temperature close to body temperature. The hard segments self-assemble into nanoconfined domains to reinforce the material. The healing strength scales sublinearly with contact time, which associates with diffusion and wetting of autohesion. The finding suggests that recombinant structural proteins from heterologous expression have potential as strong and repairable engineering materials.

A Fluidic Device with Polymeric Textured Ratchets.

Nanotextured surfaces are widely used throughout nature for adhesion, wetting, and transport. Chemistry, geometry, and morphology are important factors for creating tunable textured surfaces, in which directionality of droplets can be controlled. Here, we fabricated nano textured polymeric surfaces, and studied the effect of tilting on the mobility of frequency modulated water droplet transported on asymmetric nano-PPX tracks. Plastically-deformed tracks guided water droplets for sorting, gating, and merging them as a function on their volume. Polymeric ratchets open up new avenues for the fields of digital fluidics and flexible device fabrication.

Recent advances in nanoscale bioinspired materials.

Natural materials have been a fundamental part of human life since the dawn of civilization. However, due to exploitation of natural resources and cost issues, synthetic materials replaced bio-derived materials in the last century. Recent advances in bio- and nano-technologies pave the way for developing eco-friendly materials that could be produced easily from renewable resources at reduced cost and in a broad array of useful applications. This feature article highlights structural and functional characteristics of bio-derived materials, which will expedite the design fabrication and synthesis of eco-friendly and recyclable advanced nano-materials and devices.

Effects of surface asymmetry on neuronal growth.

Detailed knowledge of how the surface physical properties, such as mechanics, topography and texture influence axonal outgrowth and guidance is essential for understanding the processes that control neuron development, the formation of functional neuronal connections and nerve regeneration. Here we synthesize asymmetric surfaces with well-controlled topography and texture and perform a systematic experimental and theoretical investigation of axonal outgrowth on these substrates. We demonstrate unidirectional axonal bias imparted by the surface ratchet-based topography and quantify the topographical guidance cues that control neuronal growth. We describe the growth cone dynamics using a general stochastic model (Fokker-Planck formalism) and use this model to extract two key dynamical parameters: diffusion (cell motility) coefficient and asymmetric drift coefficient. The drift coefficient is identified with the torque caused by the asymmetric ratchet topography. We relate the observed directional bias in axonal outgrowth to cellular contact guidance behavior, which results in an increase in the cell-surface coupling with increased surface anisotropy. We also demonstrate that the disruption of cytoskeletal dynamics through application of Taxol (stabilizer of microtubules) and Blebbistatin (inhibitor of myosin II activity) greatly reduces the directional bias imparted by these asymmetric surfaces. These results provide new insight into the role played by topographical cues in neuronal growth and could lead to new methods for stimulating neuronal regeneration and the engineering of artificial neuronal tissue.