Homogeneous Catalysis Under Ultradilute Conditions: TAML/NaClO Oxidation of Persistent Metaldehyde.

TAML activators enable homogeneous oxidation catalysis where the catalyst and substrate (S) are ultradilute (pM-low µM) and the oxidant is very dilute (high nM-low mM). Water contamination by exceptionally persistent micropollutants (MPs), including metaldehyde (Met), provides an ideal space for determining the characteristics and utilitarian limits of this ultradilute catalysis. The low MP concentrations decrease throughout catalysis with S oxidation (kII) and catalyst inactivation (ki) competing for the active catalyst. The percentage of substrate converted (%Cvn) can be increased by discovering methods to increase kII/ki. Here we show that NaClO extends catalyst lifetime to increase the Met turnover number (TON) 3-fold compared with H2O2, highlighting the importance of oxidant choice as a design tool in TAML systems. Met oxidation studies (pH 7, D2O, 0.01 M phosphate, 25 °C) monitored by 1H NMR spectroscopy show benign acetic acid as the only significant product. Analysis of TAML/NaClO treated Met solutions employing successive identical catalyst doses revealed that the processes can be modeled by the recently published relationship between the initial and final [S] (S0 and S∞, respectively), the initial [catalyst] (FeTot) and kII/ki. Consequently, this study establishes that ΔS is proportional to S0 and that the %Cvn is conserved across all catalyst doses in multicatalyst-dose processes because the rate of the kII process depends on [S] while that of the ki process does not. A general tool for determining the FeTot required to effect a desired %Cvn is presented. Examination of the dependence of TON on kII/ki and FeTot at a fixed S0 indicates that for any TAML process employing FeTot < 1 × 10-6 M, small catalyst doses are not more efficient than one large dose.

TAML/H2O2 Oxidative Degradation of Metaldehyde: Pursuing Better Water Treatment for the Most Persistent Pollutants.

The extremely persistent molluscicide, metaldehyde, widely used on farms and gardens, is often detected in drinking water sources of various countries at concentrations of regulatory concern. Metaldehyde contamination restricts treatment options. Conventional technologies for remediating dilute organics in drinking water, activated carbon, and ozone, are insufficiently effective against metaldehyde. Some treatment plants have resorted to effective, but more costly UV/H2O2. Here we have examined if TAML/H2O2 can decompose metaldehyde under laboratory conditions to guide development of a better real world option. TAML/H2O2 slowly degrades metaldehyde to acetaldehyde and acetic acid. Nuclear magnetic resonance spectroscopy ((1)H NMR) was used to monitor the degradation-the technique requires a high metaldehyde concentration (60 ppm). Within the pH range of 6.5-9, the reaction rate is greatest at pH 7. Under optimum conditions, one aliquot of TAML 1a (400 nM) catalyzed 5% degradation over 10 h with a turnover number of 40. Five sequential TAML aliquots (2 µM overall) effected a 31% removal over 60 h. TAML/H2O2 degraded metaldehyde steadily over many hours, highlighting an important long-service property. The observation of metaldehyde decomposition under mild conditions provides a further indication that TAML catalysis holds promise for advancing water treatment. These results have turned our attention to more aggressive TAML activators in development, which we expect will advance the observed technical performance.

Unifying Evaluation of the Technical Performances of Iron-Tetra-amido Macrocyclic Ligand Oxidation Catalysts.

The main features of iron-tetra-amido macrocyclic ligand complex (a sub-branch of TAML) catalysis of peroxide oxidations are rationalized by a two-step mechanism: Fe(III) + H2O2 → Active catalyst (Ac) (kI), and Ac + Substrate (S) → Fe(III) + Product (kII). TAML activators also undergo inactivation under catalytic conditions: Ac → Inactive catalyst (ki). The recently developed relationship, ln(S0/S∞) = (kII/ki)[Fe(III)]tot, where S0 and S∞ are [S] at time t = 0 and ∞, respectively, gives access to ki under any conditions. Analysis of the rate constants kI, kII, and ki at the environmentally significant pH of 7 for a broad series of TAML activators has revealed a 6 orders of magnitude reactivity differential in both kII and ki and 3 orders differential in kI. Linear free energy relationships linking kII with ki and kI reveal that the reactivity toward substrates is related to the instability of the active TAML intermediates and suggest that the reactivity in all three processes derives from a common electronic origin. The reactivities of TAML activators and the horseradish peroxidase enzyme are critically compared.

Zebrafish Assays as Developmental Toxicity Indicators in The Design of TAML Oxidation Catalysts.

TAML activators promise a novel water treatment approach by efficiently catalysing peroxide-based degradation of chemicals of high concern at environmental concentrations. Green design ethics demands an exploration of TAML toxicity. Exposure to high concentrations of certain activators caused adverse effects in zebrafish. At typical TAML operational concentrations, development was not perturbed.

TAML activator-based amperometric analytical devices as alternatives to peroxidase biosensors.

The ferric TAML catalysts [Fe{C(6)H(2)-1,2-( NCOCMe(2)NCO)(2)CMe(2)}(OH(2))](-) (1) with counterions Na(+) (a) and PPh(4)(+) (b) function similar to horseradish peroxidase in the mediated electron transfer relays, which constitute a basis for amperometric biosensors. The mediators are mono- and bis-cyclometalated Ru and Os compounds of the type of [M(C∼N)(x)(N∼N)(3-x)](m+) with x = 1 and 2 (N∼N = 2,2'-bipyridine, (-)C∼N = 2-phenylpyridinato). Cyclic voltammograms of the Ru and Os compounds are not affected by 1a though cathodic currents increase drastically in the presence of hydrogen peroxide. The reduction potentials of [M(C∼N)(x)(N∼N)(3-x)](m+) complexes vary with both the nature of metal (Ru or Os) and the number of cyclometalated ligands x (1 or 2) and therefore the potential of working electrode can be set in the range of from -0.1 to +0.6 V versus the normal hydrogen electrode (NHE). A prototype of a biosensor for H(2)O(2) is described, in which the 1b catalyst and [Os(C∼N)(2)(N∼N)](+) mediator were coimmobilized on the surface of the glassy carbon electrode using a polymeric coating.

Design of more powerful iron-TAML peroxidase enzyme mimics.

Environmentally useful, small molecule mimics of the peroxidase enzymes must exhibit very high reactivity in water near neutral pH. Here we describe the design and structural and kinetic characterization of a second generation of iron(III)-TAML activators with unprecedented peroxidase-mimicking abilities. Iterative design has been used to remove the fluorine that led to the best performers in first-generation iron-TAMLs. The result is a superior catalyst that meets a green chemistry objective by being comprised exclusively of biochemically common elements. The rate constants for bleaching at pH 7, 9, and 11 of the model substrate, Orange II, shows that the new Fe(III)-TAML has the fastest reactivity at pH's closer to neutral of any TAML activator to date. Under appropriate conditions, the new catalyst can decolorize Orange II without loss of activity for at least 10 half-lives, attesting to its exceptional properties as an oxidizing enzyme mimic.