Microfluidic fabrication of monodisperse microcapsules with gas cores.

A facile strategy for efficient and continuous fabrication of monodisperse gas-core microcapsules with controllable sizes and excellent ultrasound-induced burst performances is developed based on droplet microfluidics and interfacial polymerization. Monodisperse gas-in-oil-in-water (G/O/W) double emulsion droplets with a gas core and monomer-contained oil layer are fabricated in the upstream of a microfluidic device as templates, and then water-soluble monomers are added into the aqueous continuous phase in the downstream to initiate rapid interfacial polymerization at the O/W interfaces to prepare monodisperse gas-in-oil-in-solid (G/O/S) microcapsules with gas cores. The sizes of both microbubbles and G/O/W droplet templates can be precisely controlled by adjusting the gas supply pressure and the fluid flow rates. Due to the very thin shells of G/O/S microcapsules fabricated via interfacial polymerization, the sizes of the resultant G/O/S microcapsules are almost the same as those of the G/O/W droplet templates, and the microcapsules exhibit excellent deformable properties and ultrasound-induced burst performances. The proposed strategy provides a facile and efficient route for controllably and continuously fabricating monodisperse microcapsules with gas cores, which are highly desired for biomedical applications.

Microfluidic Controllable Preparation of Iodine-131-Labeled Microspheres for Radioembolization Therapy of Liver Tumors.

Transcatheter arterial radioembolization (TARE) is of great significance for the treatment of advanced hepatocellular carcinoma (HCC). However, the existing radioembolic microspheres still have problems such as non-degradability, non-uniform size, and inability to directly monitor in vivo, which hinders the development of TARE. In this paper, a novel radioembolic agent, 131 I-labeled methacrylated gelatin microspheres (131 I-GMs), is prepared for the treatment of HCC. Water-in-oil (W/O) emulsion templates are prepared by a simple one-step microfluidic method to obtain methacrylated gelatin microspheres (GMs) after UV irradiation. A series of GMs with uniform and controllable size is obtained by adjusting the flow rate of each fluid. Both air-dried and freeze-dried GMs can quickly restore their original shape and size, and still have good monodispersity, elasticity, and biocompatibility. The radiolabeling experiments show that 131 I can efficiently bind to GMs by chloramine-T method, and the obtained 131 I-GMs have good radioactive stability in vitro. The results of in vivo TARE treatment in rats show that 131 I-GMs can be well retained in the hepatic artery and have a good inhibitory effect on the progression of liver cancer, showing the potential for the treatment of HCC.

Designable microfluidic ladder networks from backstepping microflow analysis for mass production of monodisperse microdroplets.

Controllable mass production of monodisperse droplets plays a key role in numerous fields ranging from scientific research to industrial application. Microfluidic ladder networks show great potential in mass production of monodisperse droplets, but their design with uniform microflow distribution remains challenging due to the lack of a rational design strategy. Here an effective design strategy based on backstepping microflow analysis (BMA) is proposed for the rational development of microfluidic ladder networks for mass production of controllable monodisperse microdroplets. The performance of our BMA rule for rational microfluidic ladder network design is demonstrated by using an existing analogism-derived rule that is widely used for the design of microfluidic ladder networks as the control group. The microfluidic ladder network designed by the BMA rule shows a more uniform flow distribution in each branch microchannel than that designed by the existing rule, as confirmed by single-phase flow simulation. Meanwhile, the microfluidic ladder network designed by the BMA rule allows mass production of droplets with higher size monodispersity in a wider window of flow rates and mass production of polymeric microspheres from such highly monodisperse droplet templates. The proposed BMA rule provides new insights into the microflow distribution behaviors in microfluidic ladder networks based on backstepping microflow analysis and provides a rational guideline for the efficient development of microfluidic ladder networks with uniform flow distribution for mass production of highly monodisperse droplets. Moreover, the BMA method provides a general analysis strategy for microfluidic networks with parallel multiple microchannels for rational scale-up.