Multifunctional konjac glucomannan/xanthan gum self-healing coating for bananas preservation.

Damage to the integrity of the preservation coating on the fruit surface will seriously affect the shelf life of the fruit. In this work, the strong hydrogen bond interaction between xanthan gum (XG) and konjac glucomannan (KGM) could form hydrogel films with self-healing properties. The introduction of gallic acid (GA) was beneficial to further improve the antioxidant activity and UV shielding performance of the composite films. Surprisingly, the mechanical properties and gas (water vapor, O2 and CO2) barrier properties of the KGM film crosslinked by XG were significantly improved. The experiment of banana preservation showed that the composite coating could effectively delay the water loss and browning of bananas, slow down the decomposition of pectin and starch in the flesh, and extend the shelf life of bananas for >6 days. Therefore, this multifunctional coating is an excellent packaging material and has a very broad application prospect in the field of food preservation.

Konjac glucomannan-based nanocomposite spray coating with antimicrobial, gas barrier, UV blocking, and antioxidation for bananas preservation.

Fruit is prone to rot and deterioration due to oxidative browning and microbial infection during storage, which can cause serious economic losses and food safety problems. It is urgent to develop a multifunctional composite coating to extend the shelf life of fruits. In this work, multifunctional quaternized chitosan nanoparticles (QCs/TA NPs) with excellent antibacterial and antioxidant properties were prepared based on electrostatic interaction using tannic acid instead of conventional cross-linking agents. Meanwhile, konjac glucomannan (KGM) with high viscosity, edible and biodegradable properties was used as a dispersant to disperse and stabilize the nanoparticles, and as a film-forming agent to form a multifunctional composite coating. The composite coating exhibited excellent oxygen and water vapor barrier properties, antioxidant, antibacterial, mechanical properties, hydrophobicity, and UV shielding properties. Surprisingly, the oxygen permeability of the K-NPs-15 composite film was as low as 1.93 × 10-13 (cm3·cm)/(cm2·s·Pa). The banana spray preservation experiments proved that the K-NPs-15 composite coating could effectively prolong the shelf life of bananas. Therefore, this study provides a new idea for designing multifunctional freshness preservation coatings, which has a broad application prospect.

Moisture loss inhibition with biopolymer films for preservation of fruits and vegetables: A review.

In cold storage, fruits and vegetables still keep a low respiratory rate. Although cold storage is beneficial to maintain the quality of some fruits and vegetables, several factors (temperature and humidity fluctuations, heat inflow, air velocity, light, etc.) will accelerate moisture loss. Biopolymer films have attracted great attention for fruits and vegetables preservation because of their biodegradable and barrier properties. However, there is still a certain amount of water transfer occurring between storage environment/biopolymer films/fruits and vegetables (EFF). The effect of biopolymer films to inhibit moisture loss of fruits and vegetables and the water transfer mechanism in EFF system need to be studied systematically. Therefore, the moisture loss of fruits and vegetables, crucial properties, major components, fabrication methods, and formation mechanisms of biopolymer films were reviewed. Further, this study highlights the EFF system, responses of fruits and vegetables, and water transfer in EFF. This work aims to clarify the characteristics of EFF members, their influence on each other, and water transfer, which is conducive to improving the preservation efficiency of fruits and vegetables purposefully in future studies. In addition, the prospects of studies in EFF systems are shown.

Konjac glucomannan-based aerogels with excellent thermal stability and flame retardancy for thermal insulation application.

Biomass aerogels are a promising kind of environment-friendly thermal insulation material. However, the flammability, poor water resistance, and thermal instability of biomass aerogels limit their applications. Herein, freeze-drying and thermal imidization were used to create konjac glucomannan (KGM), boron nitride (BN), and polyimide (PI)-based aerogels with a semi-interpenetrating network structure. The introduction of BN was beneficial to improve the mechanical properties and thermal stability of aerogels. The imidization process of PI improved the hydrophobicity, mechanical property, and flame retardancy of the aerogels. The synergistic effect of PI and BN reduced the peak heat release rate and total heat release rate of KGM-based aerogel by 55.8 % and 35 %, respectively, and endowed aerogel with good self-extinguishing performance. Moreover, the results of thermal conductivity and infrared thermal imaging demonstrated that the aerogels had excellent thermal insulation properties, and could effectively manage thermal energy over a wide range of temperatures. This study provides a simple method for the preparation of heat-insulating aerogel with high fire safety, which has broad application prospects in the field of energy saving and emission reduction.

Investigation and Characterization of Pickering Emulsion Stabilized by Alkali-Treated Zein (AZ)/Sodium Alginate (SA) Composite Particles.

Pickering emulsions stabilized by food-grade colloidal particles have attracted increasing attention in recent years due to their "surfactant-free" nature. In this study, the alkali-treated zein (AZ) was prepared via restricted alkali deamidation and then combined with sodium alginate (SA) in different ratios to obtain AZ/SA composite particles (ZS), which were used to stabilize Pickering emulsion. The degree of deamidation (DD) and degree of hydrolysis (DH) of AZ were 12.74% and 6.58% respectively, indicating the deamidation occurred mainly in glutamine on the side chain of the protein. After the treatment with alkali, AZ particle size decreased significantly. Moreover, the particle size of ZS with different ratios was all less than 80 nm. when the AZ/SA ratio was 2:1(Z2S1) and 3:1(Z3S1), the three-phase contact angle (θo/w) were close to 90°, which was favorable for stabilizing the Pickering emulsion. Furthermore, at a high oil phase fraction (75%), Z3S1-stabilized Pickering emulsions showed the best long-term storage stability within 60 days. Confocal laser scanning microscope (CLSM) observations showed that the water-oil interface was wrapped by a dense layer of Z3S1 particles with non-agglomeration between independent oil droplets. At constant particle concentration, the apparent viscosity of the Pickering emulsions stabilized by Z3S1 gradually decreased with increasing oil phase fraction, and the oil-droplet size and the Turbiscan stability index (TSI) also gradually decreased, exhibiting solid-like behavior. This study provides new ideas for the fabrication of food-grade Pickering emulsions and will extend the future applications of zein-based Pickering emulsions as bioactive ingredient delivery systems.

Multifunctional Double-Layer Composite Hydrogel Conduit Based on Chitosan for Peripheral Nerve Repairing.

Peripheral nerve regeneration and functional recovery is a major challenge in clinical practice. Nerve conduit is an effective treatment for peripheral nerve repair, but the traditional hollow nerve conduit is not satisfactory in peripheral nerve repair due to the limitation of cell migration and nutrient transport. Herein, the double cross-linked hydrogels with injectable, self-healing, and conductive properties are synthesized by the Schiff base reaction between polyaniline-modified carboxymethyl chitosan and aldehyde-modified Pluronic F-127 (F127-CHO), and the hydrophobic interaction of F127-CHO. The conductive hydrogel is injected into the cavity of chitosan conduit prepared by electrodeposition. The inner conductive hydrogel and the outer chitosan conduit are formed into a whole through the Schiff base reaction to obtain a double-layer composite hydrogel nerve conduit. The double-layer composite hydrogel neural conduit loaded with 7,8-dihydroxyflavone (DHF) has excellent degradability, biocompatibility, antioxidant activity, and Schwann cell proliferation activity. In the rat sciatic nerve defect model, the double-layer composite hydrogel nerve conduit significantly promotes sciatic nerve regeneration compared with the chitosan hollow conduit. Surprisingly, the repair ability of double-layered hydrogel nerve conduit loaded with DHF is comparable to that of autologous transplantation. Therefore, this multifunctional double-layer composite hydrogel conduit has great potential for peripheral nerve repairing.

Chitosan-based hydrogels with injectable, self-healing and antibacterial properties for wound healing.

Developing an efficient and available material for improved cutaneous tissue regeneration is a major challenge in healthcare. Inspired by the concept of moist wound healing, the injectable and self-healing adenine-modified chitosan (AC) hydrogels are designed to significantly accelerate wound healing without the addition of therapeutic drugs. A series of AC derivatives with degree of substitution (DS) ranging from 0.21 to 0.55 were synthesized in aqueous solutions, and the AC hydrogels were prepared by a simple heating/cooling process. AC hydrogels presented good self-healing, low swelling rate capacity, biocompatibility, promote cell proliferation and excellent hemostatic effect. The hydrogels displayed excellent antibacterial activities against gram-negative bacteria, gram-positive bacteria, fungi and drug-resistance bacteria. Moreover, the full-thickness skin defect model experiments showed that AC hydrogels could reduce inflammatory cell infiltration and accelerate wound healing significantly. The hydrogel can shed new light on designing of the multifunctional dressings for wound healing.

Conductive, Self-Healing, Adhesive, and Antibacterial Hydrogels Based on Lignin/Cellulose for Rapid MRSA-Infected Wound Repairing.

The abuse of antibiotics induces the emergence of drug-resistant bacteria, which greatly increases the difficulty of clinical treatment of infected wounds. It is urgent to design a multifunctional wound dressing independent of antibiotics. In this work, we designed multifunctional hydrogels based on lignin and cellulose in natural polymers. Lignin with antioxidant properties could reduce silver nanoparticles in situ and could also be used as a crosslinking agent to construct hydrogels between hydroxypropyl cellulose modified with phenylboric acid by a dynamic borate bond. Hydrogels have excellent properties such as self-healing, shape adaptability, biocompatibility, blood compatibility, antioxidant properties, excellent broad-spectrum antimicrobial properties, good tissue adhesion, and electrical conductivity. The tissue adhesion of hydrogels endows them with an excellent hemostasis property in a rat liver injury model. In vivo experiments demonstrated that hydrogels can maintain a moist healing environment, reduce inflammatory cell infiltration, promote M2 macrophage polarization, accelerate collagen deposition, promote the regeneration of new blood vessels, and significantly speed up the wound healing of methicillin-resistant Staphylococcus aureus (MRSA)-infected wounds. Therefore, these multifunctional hydrogels are an excellent candidate to treat multiple stages of wound healing and have a broad application prospect in the medical field.

Novel multifunctional adenine-modified chitosan dressings for promoting wound healing.

Wound healing is a dynamic and intricate process, and newly dressings are urgently needed to promote wound healing over the multiple stages. Herein, two water-soluble adenine-modified chitosan (CS-A) derivatives were synthesized in aqueous solutions and freeze-dried to obtain porous sponge-like dressings. The novel derivatives displayed antibacterial activities against S. aureus and E. coli. Moreover, CS-A derivatives demonstrated excellent hemocompatibility and cytocompatibility, as well as promoted the proliferation of the wound cells by shortening the G1 phase and improving DNA duplication efficiency. The ability of CS-A sponges to promote wound healing was studied in a full-thickness skin defect model. The histological analysis and immunohistochemical staining showed that the wounds treated with CS-A sponges displayed fewer inflammatory cells, and faster regeneration of epithelial tissue, collagen deposition and neovascularization. Therefore, CS-A derivatives have potential application in wound dressings and provide new ideas for the design of multifunctional biomaterials.

Thymine-modified chitosan with broad-spectrum antimicrobial activities for wound healing.

Avoiding wound infections is a major challenge in wound care management, and new materials are urgently needed to address these problems. Herein, four water-soluble thymine-modified chitosan (TC) derivatives with the degree of substitution (DS) ranging from 0.23 to 0.62 were synthesized and freeze-dried to obtain porous sponge dressings. TC derivatives had broad-spectrum antibacterial activities against gram-negative bacteria, gram-positive bacteria, fungi, drug-resistance bacteria, Pseudomonas aeruginosa and Acinetobacter baumannii. Especially, the antioxidant and antibacterial properties of TC derivatives increased with increasing DS. Furthermore, TC derivatives showed excellent biocompatibility and blood compatibility. TC sponges could significantly accelerate the wound healing process than gauze and chitosan sponge. The histological analysis and immunohistochemical staining showed that the wounds treated with TC sponges displayed fewer inflammatory cells, and faster regeneration of epithelial tissue, collagen deposition and new blood vessel formation speed. Therefore, TC sponges can shed new light for wound dressing design.

Synthesis and Fluorescent Thermoresponsive Properties of Tetraphenylethylene-Labeled Methylcellulose.

Functional polymer, especially the one based on renewable and sustainable materials, has attracted increasing attention to satisfy the growing demand for the design of stimuli-responsive devices. Methylcellulose (MC) is a water-soluble derivative of cellulose, which has been widely used in many fields for its biocompatibility and biological inertness. In this work, MC is labeled by tetraphenylethylene (TPE) via azide-alkyne click reaction to obtain a fluorescent cellulose-based derivative of MC-TPE. The degree of substitution of MC-TPE is determined to be 0.074, which can be self-assembled into micelles in water with the size of 42 ± 6 nm. MC-TPE shows thermoresponsivity and thermoreversibility in size, transmittance, and fluorescence, enabling it to work as a fluorescent thermosensor. Moreover, MC-TPE exhibits nontoxicity and biocompatibility, allowing its application in MCF-7 cell imaging. Therefore, this newly functional natural polymer shows promising potentials in the fields of sensing and bioimaging.

Fast responsive photo-switchable dual-color fluorescent cyclodextrin nanogels for cancer cell imaging.

Photo-switchable dual-color fluorescent nanogels were fabricated via nanoprecipitation in aqueous solution. The spiropyran-modified ß-cyclodextrin (ß-CD-SP) and 4-amino-7-nitro-1,2,3-benzoxadiazole (NBDNH2) were encapsulated into nanogels in the presence of 1,6-hexamethylene diisocyanate (HMDI). In the nanogels, spiropyran moiety acted as fluorescence molecule acceptors under the irradiation of UV or visible light to quench or recover the fluorescence of the NBDNH2 to achieve reversible dual-color fluorescence. The feed ratio of the two fluorophores played vital role on the energy transfer efficiency (E) of the nanogels, and the results showed that high E (90.7%) can be achieved when the feed ratio of NBDNH2/ß-CD-SP is 1:2 (mol/mol). In addition, the nanogels can maintain good photo-switchable fluorescent behavior as long as 5 weeks. With rapid photo-responsiveness (within 60 s), good reversibility, long-term stability, and excellent cytocompatibility, the as-prepared nanogels have been successfully applied to photo-switchable dual-color fluorescent imaging in cancer cell.

Preparation of a novel antibacterial chitosan-poly(ethylene glycol) cryogel/silver nanoparticles composites.

Cryogel was synthesized through cryogelation of methacrylated carboxymethyl chitosan (mCMC) and poly(ethylene glycol) diacrylate (PEGDA) precursors by photopolymerization. Due to its excellent properties, such as fast swelling behavior, inter-connective porous structure, high water absorbing capacity, especially the presence of abundant carboxylmethyl groups on its backbone, the cryogel not only favored the absorption of silver ions but also was proved to be a good matrix for the incorporation of silver nanoparticles (AgNPs) by in situ chemical reduction. The structure, morphology, and swelling behavior of the cryogel and cryogel/AgNPs composite were characterized. And the results of inhibition zone test and antibacterial inhibition ratio indicated the cryogel/AgNPs composite exhibited prominent and durable antibacterial activity against Gram-negative E. coli and could be utilized as potential antibacterial materials.