ABSTRACT
This work is devoted to the study of the processes that take place in the welding gap during explosive welding (EW). In the welding gap, when plates collide, a shock-compressed gas (SCG) region is formed, which moves at supersonic speed and has a high temperature that can affect the quality of the weld joint. Therefore, this work focuses on a detailed study of the parameters of the SCG. A complex method of determining the SCG parameters included: determination of the detonation velocity using electrical contact probes, ceramic probes, and an oscilloscope; calculation of the SCG parameters; high-speed photography of the SCG region; measurement of the SCG temperature using optical pyrometry. As a result, it was found that the head front of the SCG region moved ahead of the collision point at a velocity of 3000 ± 100 m/s, while the collision point moved with a velocity of 2500 m/s. The calculation of the SCG temperature showed that the gas was heated up to 2832 K by the shock compression, while the measured temperature was in the range of 4100-4400 K. This is presumably due to the fact that small metal particles that broke off from the welded surfaces transferred their heat to the SCG region. Thus, the results of this study can be used to optimize the EW parameters and improve the weld joint quality.
ABSTRACT
A functionally graded composite NiAl-AlMg6 was prepared using the pressure of gaseous reaction products (impurity gases) produced during the synthesis of reactive powders in a sealed reactor. It has been shown that this method can be used to prepare a NiAl/AlMg6 composite with both chaotically oriented pores in the NiAl layer and unidirectionally oriented pores (lotus-type pores). The pore shape in NiAl was found to be dependent on the pressure of the impurity gases and hydrogen present in the starting titanium powder. A mechanism for pore formation in NiAl and AlMg6 composite during SHS is proposed. Thus, functionally graded high-temperature composites can be produced by SHS in a sealed reactor using the chemical reaction energy and the pressure of impurity gases and hydrogen. Additionally, minimizing the influence of impurity gases on the contact zone increases the interface area between NiAl and AlMg6.
ABSTRACT
This paper presents the results of a study of the morphology and structure at the weld interface in a brass-Invar bimetal, which belongs to the class of so-called thermostatic bimetals, or thermobimetals. The structure of the brass-Invar weld interface was analyzed using optical microscopy and scanning electron microscopy (SEM), with the use of energy-dispersive X-ray (EDX) spectrometry and back-scattered electron diffraction (BSE) to identify the phases. The distribution of the crystallographic orientation of the grains at the weld interface was obtained using an e-Flash HR electron back-scatter diffraction (EBSD) detector and a forward-scatter detector (FSD). The results of the study indicated that the weld interface had the wavy structure typical of explosive welding. The wave crests and troughs showed the presence of melted zones consisting of a disordered Cu-Zn-Fe-Ni solid solution and undissolved Invar particles. The pattern quality map showed that the structure of brass and Invar after explosive welding consisted of grains that were strongly elongated towards the area of the highest intensive plastic flow. In addition, numerous deformation twins, dislocation accumulations and shear bands were observed. Thus, based on the results of this study, the mechanism of Cu-Zn-Fe-Ni structure formation can be proposed.
ABSTRACT
This paper presents the implementation of the first stage of a study on the synthesis of the intermetallic compound in the Ni-Al system under shock-wave extrusion (SWE). A method was developed and experiments involving SWE of the reactive Ni-Al powder mixture were carried out. As a result, it was possible to obtain up to 56 vol.% of the final product and achieve 100% synthesis of NiAl. The results of metallographic analysis indicate that the process of high-velocity collapse of the tube created conditions for the formation of a cumulative flow, which directly affects the phase formation in NiAl. It was shown that the presence of the central hole in the powder sample reduced the effect of the Mach stem on the homogeneity of the NiAl structure. It was also determined that with a central hole with a 5 mm diameter, the effect of the Mach stem could not be observed at all. The goals of further studies are achieving 90-100 vol.% of the final product and reducing the porosity in the final product. Preliminary experimental studies have shown great potential for SWE to produce composite metal-intermetallic materials.
ABSTRACT
Passive Q-switched mode locking of a 2.09 microm flashlamp-pumped Cr(3+),Tm(3+),Ho(3+):Y(3)Sc(2)Al(3)O(12) laser by use of a phosphate glass doped with PbS quantum dots of 5 nm in radius was demonstrated. Mode-locked pulses of 290 ps in duration and up to 0.5 mJ in energy were registered.
Subject(s)
Glass/chemistry , Lasers, Solid-State , Lead/chemistry , Quantum Dots , Sulfides/chemistry , Absorption , Phosphates/chemistryABSTRACT
Use of a V(3+):Y(3)Al(5)O(12) crystal as a saturable absorber Q-switch for 1.07 and 1.35 microm Nd:KGd(WO(4))(2) diode pumped lasers shows a considerable dependence of output characteristics on the orientation of the intracavity field polarization vector regarding V(3+):Y(3)Al(5)O(12) crystallographic axes. Anisotropy of nonlinear absorption of V(3+) ions in a Y(3)Al(5)O(12) single crystal at wavelengths of 1.08 and 1.35 microm has been experimentally studied. The experimental data are analyzed within the framework of a phenomenological model when the V(3+) ions are described as three sets of linear dipoles oriented along the crystallographic axes. Ground-state and excited-state absorption cross sections at 1.08 and 1.35 mum are evaluated to be sigma(gsa)=3.4x10(-18) cm(2), sigma(esa)=3.0x10(-19) cm(2) and sigma(gsa)=5.4x10(-18) cm(2), sigma(esa)=4.8x10(-19) cm(2), respectively. Saturation fluence and intensity at 1.08 and 1.35 microm are estimated as 55 mJ/cm(2) and 1.1 MW/cm(2), respectively.
ABSTRACT
Q switching of a diode-pumped Nd3+:KGd(WO4)2 laser at 1.35 microm by use of cobalt-doped magnesium- and zinc-aluminosilicate glass ceramics as saturable absorbers is demonstrated. Q-switching efficiency up to 40% has been obtained. Ground-state absorption cross sections for Co2+ ions at the wavelengths of 1.35 and 1.54 microm are estimated to be (3.5-4.0) x 10(-19) cm2. Bleaching relaxation times under the excitation of the 4A2 --> 4T1(4F) transition of tetrahedrally coordinated Co2+ ions are of 280 +/- 50 ns and 700 +/- 80 ns for magnesium- and zinc-aluminosilicate glass ceramics, respectively.
