Removal of lead in water by coagulation flocculation process using Cactus-based natural coagulant: optimization and modeling by response surface methodology (RSM).

The aim of this research is to study the ability of Cactus leaves to act as a biocoagulants for the removal of lead in water. Different solvents, such as distilled water, NaCl, NaOH, and HCl, were used as chemical activators to extract the active components from the Cactus. The Cactus was utilized as an organic coagulant in five different forms: (i) Cactus juice (CJ); Cactus extract using (ii) distilled water (C-H2O); (iii) NaCl at 0.5 M concentration (C-NaCl); (iv) NaOH at 0.05 M concentration (C-NaOH); and (v) HCl at 0.05 M concentration (C-HCl). In order to establish the optimal conditions for the coagulation, this study employed the jar test as an experimental technique and the Box-Behnken design (BBD) as an experimental approach. According to BBD, there are three factors (k = 3), namely pH, biocoagulant dosage, and settling time. The R2 and R2 adjusted for all coagulants were close to 100%, confirming the validity of all the mathematical models. The results were significant; the highest lead removal efficiencies were 98.11%, 98.34%, 95.65, 96.19%, and 97.49%, utilizing CJ, C-H2O, C-NaCl, C-HCl, and C-NaOH as natural coagulants. The Cactus has been characterized using FTIR, XRD, and SEM to identify the active components that remove lead.

Improving Biohydrogen Production by Dark Fermentation of Milk Processing Wastewater by Physicochemical and Enzymatic Pretreatments.

Biohydrogen is considered an alternative energy reserve. Dark fermentation is one of the important green hydrogen production techniques that utilizes organic waste as raw material. It is a promising bioconversion, easy, not expensive, and cost-effective process. Milk processing wastewater (MPWW) is an organic effluent generated in large volumes on a daily basis and disposed directly into the environment. In this research, the study of biochemical hydrogen potential (BHP) test of MPWW was evaluated and used as substrate (S). A waste sludge was used as an inoculum (I) and source of bacteria. Both substrate and inoculum were analyzed and the study was based mainly on the ratio of volatile solids (VS) of inoculum and substrate subsequently, which was noted as I/S. Different substrate pretreatments were performed: ultrasonic, thermal, chemical, and enzymatic hydrolysis. The I/S ratio impact was investigated and evaluated the hydrogen production improvement. Modified Gompertz and modified Logistic kinetic models were employed for the kinetic modeling of cumulative hydrogen production values. Results show that I/S ratio of 1/4 gVS/gVS resulted from the best hydrogen production of 59.96 mL during 30 days of MPWW fermentation without pretreatment. It was also shown that all the adopted pretreatments enhanced hydrogen production, whereas ultrasonic pretreatment for 5 min increased the production by only 14.84%. Heat pretreatment was more efficient, where the hydrogen production increased from 60 to 162 mL (170% of improvement) using heat shock at 90 °C for 30 min. The impact of chemical pretreatment was different from a reagent to another. Pretreatment using calcium hydroxide resulted in the biggest hydrogen production of 165.3 mL (175.5%) compared to the other chemical pretreatments. However, the best hydrogen production was given by the biological pretreatment using enzymatic hydrolysis (Lactase) resulting in 254 mL of hydrogen production, which is equivalent to 323.62% of production improvement. Modified Gompertz and Logistic kinetic models fitted well with experimental data. Thus, the enzymatic hydrolysis of MPWW proved to be a promising technique for biohydrogen production enhancement.

Enhanced fermentative hydrogen production from potato waste by enzymatic pretreatment.

Biological pretreatment and enzymatic hydrolysis have a potential role in the economic production of sugars and fuels from starch biomass. In this study, the Inoculum/Substrate (I/S) ratio effect and enzymatic pretreatments of potato peels for biohydrogen production in batch reactors were investigated. Two enzymes, α-Amylase and Cellulase, were tested separately and coexistent. Results showed that enzymatic hydrolysis using α-Amylase in mesophilic conditions enhanced carbohydrate concentration from 24.10 g/L to 53.47 g/L, whereas, the use of Cellulase and equi-volumetric mixture of both tested enzymes resulted in 47.16 and 48.16 g/L, respectively. The maximum biohydrogen cumulative production of 263 mL (equivalent to 430.37 mL H2/gVSadded) was obtained using the optimum I/S ratio of 1/6 gVS/gVS at pH 5.5 and incubation temperature of 55°C after 20 days of dark fermentation of potato waste without enzymatic treatment. Under the same operating conditions of the I/S ratio, pH, temperature and the best enzymatic treatment (3 h of substrate enzymatic hydrolysis by α-Amylase), the maximum yield of biohydrogen was 1088 mL (1780.39 mL H2/gVSadded). The enzymatic hydrolysis method adopted in this study can make overall biohydrogen production an effective process. The modified Gompertz model was found to be an adequate fit for biohydrogen production.

Optimization of active coagulant agent extraction method from Moringa Oleifera seeds for municipal wastewater treatment.

An enhanced and different method for the active coagulant agent extraction from Moringa Oleifera seeds powder (MOSP) was established and compared to the conventional extraction method in distillate water. In the improved method, MOSP were extracted using sodium chloride as solvent at different concentrations to extract more coagulant agent from Moringa Oleifera and enhance coagulation activity. In this study, MOSP were initially processed and oil content was removed to minimize coagulant concentration usage (MOSP-EO). Moringa Oleifera seeds powder was characterized by both X-ray and FTIR analysis. Ultrasound treatment as well was considered as an additional treatment for MOSP-EO to investigate its effect on coagulant agent extraction process improvement. Coagulation/flocculation experiments were conducted to assess coagulant extraction performance realized through various conditions. The effect of coagulant dosage, solvent concentration and ultrasound exposition duration were investigated for a real effluent of municipal wastewater treatment. Among the three studied NaCl concentrations, 1.0 M was found to be the best solvent concentration for high turbidity removal of more than 97% using 140 mg/L of MOSP-EO compared to extraction in distillate water 88% using 170 mg/L of the same coagulant. NaCl 1.0 M demonstrated the best performance in biochemical oxygen demand (BOD5) removal as well, where more than 98% of municipal wastewater initial BOD5 was eliminated. Mixing MOSP-EO assisted with ultrasound waves at different treatment periods did decrease the active coagulant agent extraction and thus showed its inconvenient for Moringa Oleifera coagulation activity usage.