Interaction of a 1,3-Dicarbonyl Toxin with Ru(II)-Biimidazole Complexes for Luminescence Sensing: A Spectroscopic and Photochemical Experimental Study Rationalized by Time-Dependent Density Functional Theory Calculations.

A family of ruthenium(II) complexes containing one 2,2'-biimidazole (bim) ligand and two polypyridyl (NN) ligands has been prepared and their photophysical and photochemical features have been tested in the presence of tenuazonic acid (TeA), a widespread food and feed mycotoxin of current concern. While not tested in in vivo studies, TeA and other secondary metabolites of Alternaria fungi are suspected to exert adverse effects on the human health, so sensors and rapid analytical procedures are required. It is well-known that 1,3-dicarbonyl compounds such as TeA are relatively easy to deprotonate (the pKa of TeA is 3.5), yielding an enolate anion stabilized by resonance. The chelating and hydrogen-donor features of bim allow simultaneous binding to the metal core and to the target ß-diketonate delocalized anion. Such a binding induces changes in the blue absorption (40 nm bathochromic shift), red luminescence intensity (>75% quenching), and triplet lifetime (0.2 µs decrease) of the Ru(NN)2(bim)2+ luminophore. Moreover, we have computationally rationalized, by time-dependent density functional theory, the structure of the different adducts of Ru-bim complexes with TeA and the electronic nature of the spectral absorption bands and their change upon the addition of TeA.

Immunosuppressant quantification in intravenous microdialysate - towards novel quasi-continuous therapeutic drug monitoring in transplanted patients.

OBJECTIVES: Therapeutic drug monitoring (TDM) plays a crucial role in personalized medicine. It helps clinicians to tailor drug dosage for optimized therapy through understanding the underlying complex pharmacokinetics and pharmacodynamics. Conventional, non-continuous TDM fails to provide real-time information, which is particularly important for the initial phase of immunosuppressant therapy, e.g., with cyclosporine (CsA) and mycophenolic acid (MPA). METHODS: We analyzed the time course over 8 h of total and free of immunosuppressive drug (CsA and MPA) concentrations measured by liquid chromatography-tandem mass spectrometry (LC-MS/MS) in 16 kidney transplant patients. Besides repeated blood sampling, intravenous microdialysis was used for continuous sampling. Free drug concentrations were determined from ultracentrifuged EDTA-plasma (UC) and compared with the drug concentrations in the respective microdialysate (µD). µDs were additionally analyzed for free CsA using a novel immunosensor chip integrated into a fluorescence detection platform. The potential of microdialysis coupled with an optical immunosensor for the TDM of immunosuppressants was assessed. RESULTS: Using LC-MS/MS, the free concentrations of CsA (fCsA) and MPA (fMPA) were detectable and the time courses of total and free CsA comparable. fCsA and fMPA and area-under-the-curves (AUCs) in µDs correlated well with those determined in UCs (r≥0.79 and r≥0.88, respectively). Moreover, fCsA in µDs measured with the immunosensor correlated clearly with those determined by LC-MS/MS (r=0.82). CONCLUSIONS: The new microdialysis-supported immunosensor allows real-time analysis of immunosuppressants and tailor-made dosing according to the AUC concept. It readily lends itself to future applications as minimally invasive and continuous near-patient TDM.

Highly Fluorescent Magnetic Nanobeads with a Remarkable Stokes Shift as Labels for Enhanced Detection in Immunoassays.

Fluorescence immunoassays are popular for achieving high sensitivity, but they display limitations in biological samples due to strong absorption of light, background fluorescence from matrix components, or light scattering by the biomacromolecules. A powerful strategy to overcome these problems is introduced here by using fluorescent magnetic nanobeads doped with two boron-dipyrromethane dyes displaying intense emission in the visible and near-infrared regions, respectively. Careful matching of the emission and absorption features of the dopants leads to a virtual Stokes shift larger than 150 nm achieved by an intraparticle Förster resonance energy transfer (FRET) process between the donor and the acceptor dyes. Additionally, the magnetic properties of the fluorescent beads allow preconcentration of the sample. To illustrate the usefulness of this approach to increase the sensitivity of fluorescence immunoassays, the novel nanoparticles are employed as labels for quantification of the widely used Tacrolimus (FK506) immunosuppressive drug. The FRET-based competitive inhibition immunoassay yields a limit of detection (LOD) of 0.08 ng mL-1 , with a dynamic range (DR) of 0.15-2.0 ng mL-1 , compared to a LOD of 2.7 ng mL-1 and a DR between 4.1 and 130 ng mL-1 for the immunoassay carried out with direct excitation of the acceptor dye.

Sensitive Rapid Fluorescence Polarization Immunoassay for Free Mycophenolic Acid Determination in Human Serum and Plasma.

In this Article, we describe a fluorescence polarization immunoassay (FPIA) using a new label-near-infrared fluorescent dye. The developed FPIA method was optimized for the rapid analysis of free mycophenolic acid (MPA) in plasma of transplanted patients. The approach is based on the fluorescence competitive assay between the target immunosuppressant and a novel emissive near-infrared fluorescent dye-tagged MPA and MPA-AO for the binding sites of the anti-MPA antibody. The fluorescent analogue of MPA exhibits emission at 654 nm upon excitation at 629 nm (λexcmax) and shows a good photochemical stability and a significant emission quantum yield (0.16) in phosphate buffer media. Free mycophenolic acid was isolated from blood or plasma samples using ultrafiltration prior to analysis. The sample was incubated for 20 min with 5 µg/mL of anti-MPA antibody and 1 nM of MPA-AO before the measurements. The developed FPIA displays a limit of detection of 0.8 ng/mL (10% binding inhibition) and a dynamic range of 1.7-39 ng/mL (20%-80% binding inhibition) in a PBST buffer, fitting the therapeutic requirements. The immunoassay selectivity was evaluated by measuring the cross-reactivity to other immunosuppressive drugs administered in combination with MPA (cyclosporin A and tacrolimus), as well as for the metabolite MPA glucuronide. The assay has been successfully applied to the analysis of free MPA in the blood of a heart-transplanted patient after oral administration of both mycophenolate mofetil (MMF) and tacrolimus, and the results have been compared with those obtained by rapid-resolution liquid chromatography with diode array detection (RRLC-DAD).

Ratiometric Fluorescence Detection of Phosphorylated Amino Acids Through Excited-State Proton Transfer by Using Molecularly Imprinted Polymer (MIP) Recognition Nanolayers.

A 2,3-diaminophenazine bis-urea fluorescent probe monomer (1) was developed. It responds to phenylphosphate and phosphorylated amino acids in a ratiometric fashion with enhanced fluorescence accompanied by the development of a redshifted emission band arising from an excited-state proton transfer (ESPT) process in the hydrogen-bonded probe/analyte complex. The two urea groups of 1 form a cleft-like binding pocket (Kb >1010  L2 mol-2 for 1:2 complex). Imprinting of 1 in presence of ethyl ester- and fluorenylmethyloxycarbonyl (Fmoc)-protected phosphorylated tyrosine (Fmoc-pTyr-OEt) as the template, methacrylamide as co-monomer, and ethyleneglycol dimethacrylate as cross-linker gave few-nanometer-thick molecularly imprinted polymer (MIP) shells on silica core microparticles with excellent selectivity for the template in a buffered biphasic assay. The supramolecular recognition features were established by spectroscopic and NMR studies. Rational screening of co-monomers and cross-linkers allowed to single out the best performing MIP components, giving significant imprinting factors (IF>3.5) while retaining ESPT emission and the ratiometric response in the thin polymer shell. Combination of the bead-based detection scheme with the phase-transfer assay dramatically improved the IF to 15.9, allowing sensitive determination of the analyte directly in aqueous media.

Tailoring molecularly imprinted polymer beads for alternariol recognition and analysis by a screening with mycotoxin surrogates.

Molecularly imprinted porous polymer microspheres have been prepared for selective binding of alternariol (AOH), a phenolic mycotoxin produced by Alternaria fungi. In order to lead the synthesis of recognition materials, four original AOH surrogates have been designed, prepared and characterized. They bear different number of phenol groups in various positions and different degree of O-methylation on the dibenzo[b,d]pyran-6-one skeleton. A comprehensive library of mixtures of basic, acidic or neutral monomers, with divinylbenzene or ethyleneglycol dimethacrylate as cross-linkers, were polymerized at a small scale in the presence of the four molecular mimics of the toxin molecule. This polymer screening has allowed selection of the optimal composition of the microbeads (N-(2-aminoethyl)methacrylamide, EAMA, and ethylene glycol dimethacrylate). The latter are able to bind AOH in water-acetonitrile (80:20, v/v) with an affinity constant of 109±10mM(-1) and a total number of binding sites of 35±2µmolg(-1), being alternariol monomethylether the only competitor species. Moreover, (1)H NMR titrations have unveiled a 1:2 surrogate-to-EAMA stoichiometry, the exact interaction sites and a binding constant of 1.5×10(4)M(-2). A molecularly imprinted solid phase extraction (MISPE) method has been optimized for selective isolation of the mycotoxin from aqueous samples upon a discriminating wash with 3mL of acetonitrile/water (20:80, v/v) followed by determination by HPLC with fluorescence detection. The method has been applied, in combination to ultrasound-assisted extraction, to the analysis of AOH in tomato samples fortified with the mycotoxin at five concentration levels (33-110µgkg(-1)), with recoveries in the range of 81-103% (RSD n=6). To the best of our knowledge, this is the first imprinted material capable of molecularly recognizing this widespread food contaminant.

Molecularly imprinted polymers for cleanup and selective extraction of curcuminoids in medicinal herbal extracts.

This paper describes the synthesis of novel molecularly imprinted polymers (MIPs), prepared by a noncovalent imprinting approach, for cleanup and preconcentration of curcumin (CUR) and bisdemethoxycurcumin (BDMC) from medicinal herbal extracts and further analysis by high-performance liquid chromatography with fluorescence detection (HPLC-FLD). Two molecular mimics, a mixture of reduced BDMCs and 4-(4-hydroxyphenyl)-2-butanone (HPB), have been synthesized and applied as templates for MIP synthesis. The polymers were prepared using N-(2-aminoethyl) methacrylamide (EAMA) as functional monomer, ethylene glycol dimethacrylate (EDMA) as the cross-linker (in a 1:5 molar ratio), and a mixture of acetonitrile/dimethylsulfoxide (90%, v/v) as porogen. MIPs prepared using a mixture of reduced BDMCs as template showed higher selectivity for CUR and BDMC than those obtained with HPB, with imprinting factors of 3.5 and 2.7 for CUR and BDMC, respectively, using H2O/acetonitrile (65:35, v/v) as mobile phase. The adsorption isotherms for CUR in the MIP and the nonimprinted polymer (NIP) were fitted to the Freundlich isotherm model, and the calculated average binding affinities for CUR were (17 ± 2) and (8 ± 1) mM(-1) for the MIP and the NIP, respectively. The polymers were packed into solid-phase extraction (SPE) cartridges, and the optimized molecularly imprinted solid-phase extraction (MISPE-HPLC) with fluorescence detection (FLD) method allowed the extraction of both curcuminoids from aqueous samples (50 mM NH4Ac, pH 8.8) followed by a selective washing with acetonitrile/NH4Ac, 50 mM at pH 8.8 (30:70%, v/v), and elution with 3 × 1 mL of MeOH. Good recoveries and precision ranging between 87 and 92%, with relative standard deviation (RSD) of <5.3% (n = 3), were obtained after the preconcentration of 10-mL solutions containing both CUR and BDMC at concentrations in the range of 0-500 µg L(-1). The optimized method has been applied to the analysis of both curcuminoids in medicinal herbal extracts.

Luminescent core-shell imprinted nanoparticles engineered for targeted Förster resonance energy transfer-based sensing.

Red-luminescent 200 nm silica nanoparticles have been designed and prepared as a versatile platform for developing FRET (Förster resonance energy transfer) biomimetic assays. Ru(phen)3²âº dye molecules embedded off-center in the silica core provide the long-lived donor emission, and a near-infrared labeled analyte serves as fluorescent acceptor (the measured R0 of this D-A pair is 4.3 nm). A thin surface-grafted molecularly imprinted polymer (MIP) shell intervenes as selective enrofloxacin-binding element. These nanoparticles have been tested for photochemical detection of enrofloxacin by using a competitive scheme that can be readily performed in MeCN-HEPES (pH 7.5) 7:3 (v/v) mixtures and allows for the antibiotic detection in the µM range (LOD = 2 µM) without optimization of the assay. Given the well-known difficulties of coupling the target-binding-to-MIP and the transducing events, the novel photochemical approach tuned up here will be valuable in future developments of MIP-based assays and optosensors that capitalize also on the advantages of nanomaterials for (bio)analysis.

Fluorinated Boron-Dipyrromethene (BODIPY) Dyes: Bright and Versatile Probes for Surface Analysis.

A family of bright boron-dipyrromethene-type fluorophores with a high number of fluorine atoms (F-BODIPYs) has been developed and characterized by X-ray crystallography and optical spectroscopy. The introduction of 3,5-bis(trifluoromethyl)phenyl and pentafluorophenyl moieties significantly enhances the photostability of such dyes, yielding for instance photostable near-infrared (NIR) fluorophores that show emission maxima>750 nm, when the BODIPY's π system is extended with two (dimethylamino)styryl and (dimethylamino)naphthastyryl moieties, or green-emitting BODIPYs with fluorescence quantum yields of unity. When equipped with a suitable group that selectively reacts for instance with amines, F-BODIPYs can be used as potent dual labels for the quantification of primary amino groups on surfaces by X-ray photoelectron spectroscopy (XPS) and fluorescence, two powerful yet complementary tools for the analysis of organic surface functional groups. The advantage of reactive F-BODIPYs is that they allow a fast and non-destructive mapping of the labelled supports with conventional fluorescence scanners and a subsequent quantification of selected areas of the same sample by the potentially traceable XPS technique. The performance is exemplarily shown here for the assessment of the amino group density on SiO2 supports, one of the most common reactive silica supports, in particular, for standard microarray applications.

Synthesis and properties of fused-ring-expanded porphyrins that were core-modified with Group 16 heteroatoms.

The synthesis of a series of novel core-modified and fused-ring-expanded tetraphenylporphyrins is reported. Theoretical calculations and magnetic circular dichroism (MCD) and fluorescence spectroscopic measurements were used to analyze the effect of core modification with Group 16 oxygen, sulfur, selenium, and tellurium atoms on the optical properties and electronic structures of the porphyrins. Marked redshifts of the Q and B bands and accelerated intersystem-crossing rates were observed, thus making these compounds potentially suitable for use in a variety of applications. The scope for further fine-tuning of these optical properties based on additional structural modifications, such as the incorporation of fused benzene rings to form ABAB structures by using a thiophene precursor with a fused bicyclo[2.2.2]octadiene ring and the introduction of various substituents onto the meso-phenyl rings, is also examined.

Fluorescent ion-imprinted polymers for selective Cu(II) optosensing.

This paper describes the synthesis and characterization of a fluorescent ion-imprinted polymer (IIP) for selective determination of copper ions in aqueous samples. The IIP has been prepared using a novel functional monomer, 4-[(E)-2-(4'-methyl-2,2'-bipyridin-4-yl)vinyl]phenyl methacrylate (abbreviated as BSOMe) that has been spectroscopically characterized in methanolic solution, in the absence and in the presence of several metal ions, including Cd(II), Cu(II), Hg(II), Ni(II), Pb(II), and Zn(II). The stability constant (2.04 × 10(8) mol(-2) l(2)) and stoichiometry (L(2)M) of the BSOMe complex with Cu(II) were extracted thereof. Cu(II)-IIPs were prepared by radical polymerization using stoichiometric amounts of the fluorescent monomer and the template metal ion. The resulting cross-linked network did not show any leaching of the immobilized ligand allowing determination of Cu(II) in aqueous samples by fluorescence quenching measurements. Several parameters affecting optosensor performance have been optimized, including sample pH, ionic strength, or polymer regeneration for online analysis of water samples. The synthesized Cu(II)-IIP exhibits a detection limit of 0.04 µmol l(-1) for the determination of Cu(II) in water samples with a reproducibility of 3%, exhibiting an excellent selectivity towards the template ion over other metal ions with the same charge and close ionic radius. The IIP-based optosensor has been repeatedly used and regenerated for more than 50 cycles without a significant decrease in the luminescent properties and binding affinity of the sensing phase.

meso-Aryl phenanthroporphyrins: synthesis and spectroscopic properties.

The successful synthesis of tetraphenyltetraphenanthroporphyrin (TPTPhenP; 5a) in 2006 under modified Rothemund-Lindsey conditions yielded a tetraphenyl porphyrinoid with a B band redshifted to an unprecedented 576 nm. Radially symmetric fused-ring expansion of tetraphenylporphyrin with phenanthrene moieties results in very deep saddling due to steric crowding and very marked redshifts of the Q and B (or Soret) porphyrinoid absorption bands. The extent to which the TPTPhenP structure can be further modified is explored, and the optical properties of TPTPhenPs are analyzed based on a perimeter model approach that makes use of time-dependent DFT calculations and magnetic circular dichroism spectroscopy and also based on a detailed analysis of the fluorescence emission. Attempts to introduce substituents at the ortho and meta positions of the meso-phenyl groups and to insert a central metal proved unsuccessful. The synthesis of a series of TPTPhenPs with strong electron-withdrawing (-CN, -NO(2)) and -donating (-CH(3), -N(CH(3))(2)) substituents at the para positions of the meso-phenyl rings is reported. Marked redshifts of the main spectral bands were consistently observed. The most pronounced spectral changes were observed with -N(CH(3))(2) groups (5i) due to a marked destabilization of the HOMO, which has large MO coefficients on the meso-carbon atoms. Protonation of 5i at both the ligand core and at the -N(CH(3))(2) groups resulted in unprecedented Q(00) band absorption at wavelengths greater than 1200 nm.

Luminescence amplification strategies integrated with microparticle and nanoparticle platforms.

The amplification of luminescence signals is often the key to sensitive and powerful detection protocols. Besides optimized fluorescent probes and labels, functionalized nano- and microparticles have received strongly increasing attention in this context during the past decade. This contribution introduces the main signalling concepts for particle-based amplification strategies and stresses, especially the important role that metal and semiconductor nanoparticles play in this field. Besides resonance energy transfer, metal-enhanced emission and the catalytic generation of luminescence, the impact of multi-chromophoric objects such as dye nanocrystals, dendrimers, conjugated polymers or mesoporous hybrid materials is assessed. The representative examples discussed cover a broad range of analytes from metal ions and small organic molecules to oligonucleotides and enzyme activity.

Dihydronaphthalene-fused boron-dipyrromethene (BODIPY) dyes: insight into the electronic and conformational tuning modes of BODIPY fluorophores.

A new series of boron-dipyrromethene (BDP, BODIPY) dyes with dihydronaphthalene units fused to the beta-pyrrole positions (1a-d, 2) has been synthesised and spectroscopically investigated. All the dyes, except pH-responsive 1d in polar solvents, display intense emission between 550-700 nm. Compounds 1a and 1b with a hydrogen atom and a methyl group in the meso position of the BODIPY core show spectroscopic properties that are similar to those of rhodamine 101, thus rendering them potent alternatives to the positively charged rhodamine dyes as stains and labels for less polar environments or for the dyeing of latex beads. Compound 1d, which carries an electron-donating 4-(dimethylamino)phenyl group in the meso position, shows dual fluorescence in solvents more polar than dibutyl ether and can act as a pH-responsive "light-up" probe for acidic pH. Correlation of the pK(a) data of 1d and several other meso-(4-dimethylanilino)-substituted BODIPY derivatives allowed us to draw conclusions on the influence of steric crowding at the meso position on the acidity of the aniline nitrogen atom. Preparation and investigation of 2, which carries a nitrogen instead of a carbon as the meso-bridgehead atom, suggests that the rules of colour tuning of BODIPYs as established so far have to be reassessed; for all the reported couples of meso-C- and meso-N-substituted BODIPYs, the exchange leads to pronounced redshifts of the spectra and reduced fluorescence quantum yields. For 2, when compared with 1a, the opposite is found: negligible spectral shifts and enhanced fluorescence. Additional X-ray crystallographic analysis of 1a and quantum chemical modelling of the title and related compounds employing density functional theory granted further insight into the features of such sterically crowded chromophores.

On the signalling pathways and Cu(II)-mediated anion indication of N-meso-substituted heptamethine cyanine dyes.

Join or attack: meso-Cyclam-substituted heptamethine cyanine dye 1 responds very differently to the presence of metal ions and protons. Whereas the former are embraced in a host-guest complex, the latter attack the cyanine pi system (see picture). In the presence of Cu(II), 1 selectively forms near-infrared absorbing aggregates in buffered solution that allow the determination of citrate by using colourimetry.Three mid-chain rigidified heptamethine cyanine dyes substituted with dimethylamino or cyclam groups at the meso position of the polymethine chain have been prepared and studied both experimentally and theoretically with respect to their spectroscopic response toward protons and various metal ions. Despite a potentially rich conformational ground-state chemistry, the spectroscopic studies revealed that the behaviour of the dyes is in agreement with Kuhn's classic polymethine dye theory. Coordination of metal ions and protonation of the alkyl amino groups in the cyclam moiety accordingly lead to moderate bathochromic shifts in absorption and reduced Stokes shifts. In contrast, protonation of the dimethylamino-substituted derivatives occurs at the polymethine chain, transforming the heptamethine into a trimethine-type chromophore with concomitant gigantic spectral blueshifts. In the presence of Cu(II) in buffered aqueous solution, the cyclam-substituted dye selectively forms near-infrared absorbing aggregates. The latter allow the determination of citrate under realistic conditions by changes in absorption at wavelengths greater than 800 nm, which results from a disruption of the aggregates when citrate binds to Cu(II). The copper ions thus act as mediators in a signalling reaction that constitutes a colourimetric displacement assay.

Red/near-infrared boron-dipyrromethene dyes as strongly emitting fluorophores.

We present an overview of the state of the art in long-wavelength boron-dipyrromethene (BODIPY) fluorophores, focusing on strategies to shift the absorption and emission bands into the red/near-infrared (NIR) range of the spectrum. This report also discusses chemical modifications of the chromophoric core to obtain analyte-responsive fluorophores, including examples of pH and metal ion indicators. Finally, we present a new series of phenanthrene-fused BODIPY dyes, emitting with high efficiency in the red/NIR region of the spectrum, as well as discussing potential applications thereof as probes.

Phenanthrene-fused boron-dipyrromethenes as bright long-wavelength fluorophores.

A new class of boron-dipyrromethene (BDP or BODIPY) dyes was obtained by phenanthrene fusion to the beta-pyrrole positions, absorbing in the wavelength range of important laser sources. Despite a 'propeller-like' distorted structure in the crystalline state, the chromophore absorbs (log epsilon > or = 5) and fluoresces (Phif > or = 0.8) strongly and can be easily turned into a fluorescence light-up probe. Incorporation into latex beads produces bright and photostable single-dye and Förster Resonance Energy Transfer (FRET) particles for microscopy applications.

The supramolecular chemistry of organic-inorganic hybrid materials.

The combination of nanomaterials as solid supports and supramolecular concepts has led to the development of hybrid materials with improved functionalities. These "hetero-supramolecular" ideas provide a means of bridging the gap between molecular chemistry, materials sciences, and nanotechnology. In recent years, relevant examples have been reported on functional aspects, such as enhanced recognition and sensing by using molecules on preorganized surfaces, the reversible building of nanometer-sized networks and 3D architectures, as well as biomimetic and gated chemistry in hybrid nanomaterials for the development of advanced functional protocols in three-dimensional frameworks. This approach allows the fine-tuning of the properties of nanomaterials and offers new perspectives for the application of supramolecular concepts.