Ultrafast excited-state energy migration dynamics in an efficient light-harvesting antenna polymer based on Ru(II) and Os(II) polypyridyl complexes.

A detailed study of the excited state energy migration dynamics that take place within an assembly of Ru(II) and Os(II) polypyridyl complexes linked together through a polymer backbone is presented. The energy migration process is initiated by the photoexcitation of the metal-to-ligand charge transfer (MLCT) transition in one of the Ru(II) complexes and terminated by energy transfer to a lower energy Os(II) trap. Energy transfer sensitization of Os(II) can occur in a single step if the excited state is formed adjacent to a trap, or after a series of hops between isoenergetic rutheniums prior to reaching a trap. The dynamics of the energy transfer process are followed by monitoring the growth of Os(II) luminescence at 780 nm. The kinetics of the growth are complex and can be fit by a sum of two exponentials. This kinetic complexity arises both from the presence of a distribution of donor-acceptor distances and the variety of time scales by which Os(II) can be formed. We have augmented the time-resolved experiments with Monte Carlo simulations, which provide insight into the polymer array's structure and at the same time form the basis of a molecular-level description of the energy migration dynamics. The simulations indicate that the most probable Ru-->Os energy transfer time is approximately 400 ps while the time scale for Ru-->Ru hopping is approximately 1-4 ns. The time scale for Ru-->Ru hopping relative to its natural lifetime (1000 ns) suggests that this polymer system could be extended to considerably longer dimensions without an appreciable loss in its overall efficiency.

Viscosity effects on the thermal decomposition of bis(perfluoro-2-N-propoxypropionyl) peroxide in dense carbon dioxide and fluorinated solvents.

The thermal decomposition of the free-radical initiator bis(perfluoro-2-N-propoxyprionyl) peroxide (BPPP) was studied in dense carbon dioxide and a series of fluorinated solvents. For the fluorinated solvents, the observed first-order decomposition rate constants, k(obs), increased with decreasing solvent viscosity, suggesting a single-bond decomposition mechanism. The k(obs) values are comparatively larger in dense carbon dioxide and similar to the "zero-viscosity" rate constants extrapolated from the decomposition kinetics in the fluorinated solvents. The decomposition activation parameters demonstrate a compensation behavior of the activation enthalpy with the activation entropy upon change in solvent viscosity. Comparison of the change in activation parameter values upon change in solvent viscosity for BPPP with two additional initiators, acetyl peroxide (AP) and trifluoroacetyl peroxide (TFAP), further suggests that carbon dioxide exerts a very minimal influence on the decomposition mechanism of these initiators through solvent-cage effects.

Separation of positional isomers of oxidation catalyst precursors.

A series of polypyridyl ruthenium complexes of the general formula [Ru(tpy)(bpy')Cl]+ where tpy is 2,2':6',2"-terpyridine and bpy' is 4-carboxy-4'-methyl-2,2'-bipyridine (4-CO2H-4'-Mebpy), a proline derviative (4-CO-Pra-(Boc)(OMe)-4'-Mebpy), or 4-((diethoxyphosphinyl)methyl)-4'-methyl-2,2'-bipyridine (4-CH2PO3Et2-4'-Mebpy) are prepared. For each complex, two isomers exist, and these are separated chromatographically. The structure of the hexafluorophosphate salt of cis-[Ru(tpy)(4-CO2H-4'-Mebpy)Cl]+, cis-1, is determined by X-ray crystallography. The salt crystallizes in the monoclinic space group Cc with a = 12.4778(6) A, b = 12.6086(6) A, c = 20.1215(9) A, beta = 107.08200(1) degrees, Z = 4, R = 0.058, and Rw = 0.072. The structures of the remaining complexes are assigned by 1H NMR comparisons with cis-1. The complexes are potentially important precursors for the incorporation of RuIV=O2+ oxidants into polymers or peptides or for their adsorption onto oxide surfaces. Preliminary electrochemical results for the isomers of [Ru(tpy)(4-CH2PO3H2-4'-Mebpy)(H2O)]2+, 4, adsorbed on ITO (In2O3:Sn) surfaces add support to a recently proposed electron-transfer mechanism involving cross-surface proton-coupled electron transfer.

Mimicking the antenna-electron transfer properties of photosynthesis.

A molecular assembly based on derivatized polystyrene is described, which mimics both the light-harvesting and energy-conversion steps of photosynthesis. The system is unique in that the two key parts of a photosynthetic system are incorporated in a functional assembly constructed from polypyridine complexes of Ru(II). This system is truly artificial, as none of the components used in construction of the assembly are present in a natural photosynthetic system. Quantitative evaluation of the energy and electron transfer dynamics after transient irradiation by visible light offers important insights into the mechanisms of energy transport and electron transfer that lead to photosynthetic light-to-chemical energy conversion.

One-pot synthesis and characterization of a chromophore--donor--acceptor assembly.

The acid-functionalized tris-heteroleptic chromophore--donor--acceptor assembly [RuII(bpyCOOH)(bpyCH2PTZ)(bpyCH2MV2+)](PF6)4]4+ (1) (bpyCOOH = 4'-methyl-2,2'-bipyridine-4-carboxylic acid; bpyCH2PTZ = 10-((4'-methyl-2,2'-bipyridin-4-yl)methyl)phenothiazine; bpyCH2MV2+ = 1-((4'-methyl-2,2'-bipyridin-4-yl)methyl)-1'-methyl- 4,4'-bipyridinediium) was synthesized in a one-pot reaction by careful selection of the order of ligand addition to RuCl2(DMSO)4 (DMSO = dimethyl sulfoxide). The success of this method was based upon separation and isolation of 1 from mixtures containing ligand-scrambled products by cation exchange chromatography. Metal-to-ligand charge-transfer (MLCT) excitation in acetonitrile at 464 nm was followed by intramolecular electron transfer to give a redox-separated state [RuII(bpyCOOH)(bpyCH2PTZ.+)(bpyCH2MV.+)]4+ with an efficiency of eta RS = 0.35 +/- 0.05.

Step-scan FTIR time-resolved spectroscopy study of excited-state dipole orientation in soluble metallopolymers.

Step-scan FTIR time-resolved spectroscopy (S2FTIR TRS) in acetonitrile-d3 has been used to probe the acceptor ligand in metal-to-ligand charge transfer (MLCT) excited states of amide-substituted polypyridyl complexes of RuII and in analogues appended to polystyrene. On the basis of ground-to-excited state shifts in v(C = O) of -31 cm-1 for the amide group in [RuII(bpy)2(bpyCONHEt')]2+ (bpyCONHEt' = 4'-methyl-2,2'-bipyridine-4-carboxamide-Et'; Et' = -CH2CH2BzCH2CH3) (1) and in the derivatized polystyrene abbreviated [PS-[CH2-CH2NHCObpy-RuII(bpy)2]20]40+ (3), the excited-state dipole is directed toward the amide-containing pyridyl group in the polymer side chain. Smaller shifts in v(C = O) of -17 cm-1 in [RuII(4,4'-(CONEt2)2bpy)2-(bpyCONHEt')]2+ (2) and in the derivatized polystyrene abbreviated [PS-[CH2CH2NHCObpy-RuII(4,4'-(CONEt2)2bpy)2]20]40+ (4) indicate that the excited-state dipole is directed toward one of the diamide bpy ligands. The nearly identical results for 1 and 3 and for 2 and 4 show that the molecular and electronic structures of the monomer excited states are largely retained in the polymer samples. These conclusions about dipole orientation in the polymers are potentially of importance in understanding intrastrand energy transfer dynamics. The excited-state dipole in 3 is oriented in the direction of the covalent link to the polymer backbone, and toward nearest neighbors. In 4, it is oriented away from the backbone.

Evaluation of matrix-assisted laser desorption ionization mass spectrometry for polymer characterization.

A protocol for the preparation of polymeric samples for time-of-flight matrix-assisted laser desorption ionization mass spectrometry (TOF-MALDI-MS) analysis was developed. Dithranol was identified as a good matrix for polystyrene (PS), and the addition of silver for cationization of molecules was determined to be necessary. Based on this preparative method, low molecular weight samples of other polymers [polyisoprene, polybutadiene, poly(ethylene oxide), poly(methyl methacrylate), and polydimethylsiloxane] were analyzed with molecular weights up to 49 ku. The effects of laser intensity were determined to influence the molecular weight distribution of intact oligomers, most significantly for low molecular weight polymers. Linear and reflectron modes of analysis were evaluated; better signal intensity and resolution were obtained in the reflectron mode. The TOF-MALDI-MS measurements are compared with time-of-flight secondary ion mass spectrometry (TOF-SIMS) and gel permeation chromatography (GPC) for the same polymers. The M n values calculated by TOF-MALDI-MS consistently are higher than values calculated by TOF-SIMS for all classes of polymers with molecular weights up to 8 ku. The molecular weights of the PS calculated from TOF-MALDI-MS are in good agreement with GPC (±10%). The composition of the terminal group on a polymer chain may affect the ion yields. The ion yields of intact oligomers were evaluated as a function of end group composition for both TOF-MALDI-MS and TOF-SIMS. The slight disparity of results between TOF-SIMS and TOF-MALDI-MS for the perfluoroalkyl-terminated PS suggests that the oligomers are desorbed preferentially from the surface in the TOF-SIMS analysis, rather than having an increased ionization probability.

Dispersion polymerizations in supercritical carbon dioxide.

Conventional heterogeneous dispersion polymerizations of unsaturated monomers are performed in either aqueous or organic dispersing media with the addition of interfacially active agents to stabilize the colloidal dispersion that forms. Successful stabilization of the polymer colloid during polymerization results in the formation of high molar mass polymers with high rates of polymerization. An environmentally responsible alternative to aqueous and organic dispersing media for heterogeneous dispersion polymerizations is described in which supercritical carbon dioxide (CO(2)) is used in conjunction with molecularly engineered free radical initiators and amphipathic molecules that are specifically designed to be interfacially active in CO(2). Conventional lipophilic monomers, exemplified by methyl methacrylate, can be quantitatively (>90 percent) polymerized heterogeneously to very high degrees of polymerization (>3000) in supercritical CO(2) in the presence of an added stabilizer to form kinetically stable dispersions that result in micrometer-sized particles with a narrow size distribution.

Synthesis of fluoropolymers in supercritical carbon dioxide.

Fluoropolymers are used in many technologically demanding applications because of their balance of high-performance properties. A significant impediment to the synthesis of variants of commercially available amorphous fluoropolymers is their general insolubility in most solvents except chlorofluorocarbons (CFCs). The environmental concerns about CFCs can be circumvented by preparing these technologically important materials in supercritical fluids. The homogeneous solution polymerization of highly fluorinated acrylic monomers can be achieved in supercritical carbon dioxide by using free radical methods. In addition, detailed decomposition rates and efficiency factors were measured for azobisisobutyronitrile in supercritical carbon dioxide and were compared to those obtained with conventional liquid solvents.

Indomethacin decreases carrageenan-induced peritoneal adhesions.

For evaluation of a rat intra-abdominal adhesion model, 48 study rats were each given an intraperitoneal injection of 1 ml of 1.5% carrageenan solution and 48 control rats were each given 1 ml of sterile saline solution. Thereafter, 6 control and 6 study rats were killed on days 2, 3, 4, 5, 7, 9, 14, and 21 for assessment of the temporal nature of adhesion formation. No peritoneal reaction or adhesions occurred from saline solution. Carrageenan induced a generalized peritonitis between days 2 and 7. The frequency of adhesions from day 5 onward was 66%. The effects of celiotomy and of systemic indomethacin on carrageenan-induced adhesion formation were then examined. Rats underwent a standardized celiotomy and, on closure of the abdomen, received either an intraperitoneal injection of saline solution (n = 72) or an intraperitoneal injection of carrageenan solution (n = 96). Both groups were then randomized to receive either no indomethacin (IND-0), a single preoperative dose of indomethacin (IND-1), or four perioperative doses of indomethacin (IND-4). Then, 2, 5, 14, and 21 days later, rats from each group were killed, the extent of intraperitoneal adhesions was assessed, and the nature of any adhesions was histologically examined. Celiotomy plus intraperitoneal saline solution produced no adhesions. Celiotomy plus intraperitoneal carrageenan solution (IND-0) significantly increased adhesions to 83%. Preoperatively and perioperatively administered indomethacin significantly decreased the adhesion formation rate to 49%.