Examination of postures and frequency of musculoskeletal disorders among manual workers in Calcutta, India.

BACKGROUND: Manual material handling (MMH) activities require workers to adopt various awkward postures leading to the development of musculoskeletal disorders (MSD). OBJECTIVES: To investigate the postures adopted during heavy load handling and the frequency of MSDs among MMH workers in Calcutta, India. METHODS: We conducted a cross-sectional study with 100 MMH workers. MSD frequency was assessed via the Standardized Nordic Questionnaire. The Ovako Working Posture Assessment System (OWAS) was used to analyze working posture. We used logistic regression to predict MSD risk factors. RESULTS: Ninety five percent of workers reported a MSD in at least one body part in the past 12 months. According to OWAS results, 83% of the analysed work postures require immediate corrective measures for worker safety. The most harmful posture was carrying a heavy load overhead. Carrying more than 120 kg increased the odds of low back and neck pain by 4.527 and 4.555, respectively. CONCLUSIONS: This sample had a high frequency of reported MSDs, likely attributed to physiologically strenuous occupational activities repeated on average of 30-40 times daily. Ergonomic interventions, such as the use of handcarts, and occupational training are urgently needed.

Impact of rest breaks on musculoskeletal discomfort of Chikan embroiderers of West Bengal, India: a follow up field study.

OBJECTIVES: This study aimed to determine risk factors that predict musculoskeletal discomfort in Chikan embroiderers of West Bengal, India, and to compare the effect of two rest break schedules to reduce these symptoms. METHODS: The Nordic musculoskeletal questionnaire was performed on 400 Chikan embroiderers at baseline containing questions on job autonomy, working behavior, and work stress factors. Relative risk was calculated to identify prognostic factors for musculoskeletal discomfort in different body regions. Two groups of workers received two rest break schedules for 4 months and compared in a between-subject design. Outcome variables were scores of Body Part Discomfort (BPD) scale. RESULTS: Chikan embroiderers are afflicted with musculoskeletal discomfort mainly in the lower back, neck/shoulder and wrist/forearm region, which is attributed to their prolonged working timeinvolving hands and wrists, being in a static seating posture. Rigidity in working methods, prolonged working time, inadequate rest break during the working day, dissatisfaction regarding earning, monotonous work, static sitting posture, and repetitive movement of wrist and forearm were the significant predictors of these symptom developments. Rest break schedule 1 with more frequent and shorter breaks had more significant improvement on the severity of these musculoskeletal discomforts. CONCLUSIONS: Chikan embroiderers perform a highly dreary occupation and various ergonomics conditions work as predictors for developing musculoskeletal discomforts among them. Design of proper rest break schedule involving shorter and frequent breaks was competent for reducing these discomforts to a certain extent.

An ergonomics study on the evaluation of carpal tunnel syndrome among Chikan embroidery workers of West Bengal, India.

BACKGROUND: Chikan embroidery is a popular handicraft in India that involves hand-intensive stitching while seated in a static posture with the upper back curved and the head bent over the fabric. Women perform most Chikan embroidery. OBJECTIVES: The aim of this study was to analyze the repetitive nature of this work among female Chikan embroiderers by measuring the prevalence of upper extremity discomfort and carpal tunnel syndrome (CTS). METHODS: The Nordic musculoskeletal questionnaire was used to analyze the extent of upper extremity pain symptomology. The repetitive nature of Chikan embroidery work was evaluated using the Assessment of Repetitive Tasks of the upper limbs tool (ART). Motor nerve conduction studies of median and ulnar nerves were performed with embroidery workers and a control group to determine the risk of CTS. RESULTS: Among embroidery workers, the prevalence of wrist pain was 68% and forearm pain was 60%. The embroiderers also commonly reported Tingling and numbness in the hands and fingertips. The ART analysis found that Chikan embroidery is a highly repetitive task and nerve conduction studies showed that the embroidery workers were more likely to experience CTS than women in the control group. CONCLUSIONS: Chikan embroidery is a hand-intensive occupation involving repetitive use of hands and wrists and this study population is at risk of experiencing CTS. Future research should explore the potential benefits of ergonomics measures including incorporating breaks, stretching exercises, and the use of wrist splints to reduce repetitive strain and the probability of developing CTS.

Prevalence of low back pain among handloom weavers in West Bengal, India.

BACKGROUND: Handloom is one of the oldest industries in India, particularly in West Bengal, where a considerable number of rural people are engaged in weaving. OBJECTIVES: The purpose of this study was to evaluate the prevalence of low back pain among the handloom weavers in India. METHODS: A modified Nordic Musculoskeletal Disorder Questionnaire and Oswestry Low Back Pain Disability Questionnaire along with a body part discomfort scale were administered to handloom weavers (n = 175). Working posture of the participants was assessed using the Ovako Working Posture Analysis System (OWAS). RESULTS: Sixty eight per cent of the participants reported suffering from low back pain, making it the most prevalent disorder in our sample. Analysis of the Oswestry Low Back Pain Disability Questionnaire data revealed that among those with low back pain (n = 119), 2% had severe disabilities, 46% had moderate disabilities, and 52% had minimal disabilities. Statistical analyses revealed a positive significant association between the intensity of pain in the lower back and an increased number of years of work experience (P<0·05). CONCLUSIONS: The study underlines the need for further research regarding the postural strain of weavers and also suggests the implementation of ergonomic design into weaver workstations to minimize the adverse effect of their current working postures. Improving upon the weaver's work-posture could improve their quality of life.

Design and evaluation of ergonomic interventions for the prevention of musculoskeletal disorders in India.

BACKGROUND: Improper workstation, work procedures and tools are found to be the risk factors for the development of musculoskeletal disorders among the informal sector workers of the developing countries. Low cost ergonomic interventions can effectively improve such adverse conditions. CASE PRESENTATION: In the present article some studies related to design interventions in different informal and agricultural sectors were discussed and their efficacies were analyzed. It was observed that with the help of appropriate interventions musculoskeletal disorders were reduced, adverse physiological conditions were improved when awkward postures were corrected and ultimately the organisational productivity was increased. CONCLUSION: Proper implementation of ergonomic interventions can ultimately improve the economy of the nation.

Effect of low back pain on social and professional life of drivers of Kolkata.

Abstract Occupational driving has often been associated with a high prevalence of back pain. Buses constitute the backbone of the local transportation; so many people are engaged in the profession. The present study was to investigate the prevalence of low back pain (LBP) and due to that problem whether their social and professional life hampers or not. The present study was undertaken among 160 government undertaking male bus drivers. Modified Nordic musculoskeletal questionnaire was performed with physical assessment. Then Oswestry Low Back Pain Disability Questionnaire (QLBPDQ) was performed to evaluate the extent to which social and professional life is restricted by back pain. Afterwards, the sit-and-reach test and investigation of sitting postures was done. From the analysis of questionnaire it was revealed that drivers had to spend 8-10 hours daily for 6 days in a shift. It was further observed that all of them mainly suffering from LBP. From the QLBPDQ analysis it was found that LBP restricted their social and professional life. Sit and reach test and posture analysis also support this finding. This result is an absolute reflection of the alarming situations of the Kolkata bus drivers. It can be concluded that the bus drivers are highly stressed due to the hazardous working conditions, which in turn may additionally affects their health and overall work performance in the long run.

An ergonomics study on the prevalence of musculoskeletal disorders among Indian bus conductors.

This study was undertaken among 100 randomly selected bus conductors from 2 routes. A questionnaire study based on the modified Nordic musculoskeletal questionnaire, assessment of physical and physiological parameters, analysis of working postures and a detailed work study were performed. The analysis revealed that conductors had a work schedule of 16-18 h each day; the duration of work could vary from 15 to 20 days at a stretch. Discomfort leading to musculoskeletal disorders mainly affecting the leg (93.3%), knee (83.3%), shoulder (80%) and back areas (56.7%) had the highest 12-month prevalence rates and increased day by day. The conductors also suffered from extreme physiological stress due to prolonged working hours in hazardous standing posture conditions, excessive work pressure and minimum rest between trips. Consequently, all those factors affected their health and work performance.

An ergonomic study on musculoskeletal health hazards among sawmill workers of West Bengal, India.

The study was undertaken to determine the prevalence of musculoskeletal discomfort among the sawmill workers of Kolkata and to identify the causative factors behind the development of such discomfort. For this study 110 male workers were randomly selected. For the symptom survey, modified Nordic questionnaire on detail discomfort feelings was performed. Analysis of working posture, repetitiveness of work, measurement of handgrip strength, measurement of pre and post working heart rate, measurement of lower back muscle flexibility were performed on the selected sawmill workers suffering from musculoskeletal discomfort. The results revealed that musculoskeletal discomfort was a major problem among the sawmill workers, primarily involving the lower back (100%), neck (95.96%), wrist (87.78%), and shoulder (84.44%). Their activities were highly repetitive and the handgrip strength of these workers was significantly lower than that of the comparison group. The results also revealed that musculoskeletal discomfort was high among the sawmill workers who were doing the job for a longer period of time than those who are doing the same job for a shorter period of time. Based on these findings, it appears that repetitiveness in work, handling heavy load, sustained work activity, strenuous job, and uncomfortable posture might be the causative factors for the development of their discomfort feelings. Thus to ensure good health, safety and productivity of these workers, some ergonomic measures have to be taken as early as possible.