Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 7 de 7
Filter
Add more filters










Database
Language
Publication year range
1.
Clin Ter ; 171(5): e385-e392, 2020.
Article in English | MEDLINE | ID: mdl-32901779

ABSTRACT

BACKGROUND: Marginal bone loss (MBL) represents an important indicator of peri-implant health and the measure of its level is considered a determining factor in the evaluation of the quality of survival. Aim of this study is to compare radiographic changes in the fractal and mesial/distal vertical dimensions of peri-implant trabecular bone of dental implants with a laser-ablated micron-scale modication (LAM) of collar surface after a 5-year follow-up period. MATERIALS AND METHODS: Thirty-four implants with LAM of collar surface (test group = TG) and 31 implants without LAM of collar surface (control group = CG) were placed in 45 non-smoking, periodontally healthy patients. Fractal and vertical dimensions of peri-implant trabecular bone were measured by comparing radiographs taken immediately after prosthesis delivery with those taken 3 years and 5 years after functional loading. RESULT: At the end of the 5-year follow-up, the MBL in the TG was 0.87±0.21 and 0.75±0.25 mm at the mesial and distal aspects, respectively, while a MBL of 2.05±0.25 mm at the mesial aspect and 2.01±0.34 mm at the distal site was recorded in the CG. A statistically significant difference was noted. In the TG the mean fractal dimension before loading was 1.4213±0.0525. It increased significantly to 1.4329±0.0479 at 3 years after loading and remained almost stable at 5 years after loading (1.4327±0.0291). In the CG the mean fractal dimension before loading was 1.4119±0.0414. It increased significantly to 1.4282±0.0324 at 3 years after loading and decreased significantly to 1.4111±0.0624 at 5 years after loading. At the end of the follow-up, differences between both study groups were statistically significant. CONCLUSION: The increased fractal dimension and the reduced MBL around TG implants after 5 years of functional loading indicates a positive effect of a laser-ablated micron-scale modication of collar surface on peri-implant trabecular bone remodeling.


Subject(s)
Cancellous Bone/surgery , Dental Implants , Laser Therapy , Adult , Cancellous Bone/diagnostic imaging , Female , Follow-Up Studies , Fractals , Humans , Male , Middle Aged , Radiography , Retrospective Studies , Surface Properties
2.
Clin Ter ; 170(4): e258-e261, 2019.
Article in English | MEDLINE | ID: mdl-31304512

ABSTRACT

AIMS: This study aims to estimate the microbial presence on the surface of different brand new NiTi endodontic instruments for clinical use. MATERIAL AND METHODS: Eleven different types of NiTi rotary endodontic instruments, obtained from their fresh opened original packages, were assigned to three different groups, according to packaging type and sterilization and tested for bacterial contamination. Isolated bacteria were identified by using standard microbiological methods and then counted. Differences observed in groups were analyzed statistically by using the one-way analysis of variance (ANOVA) for dependent samples and the Tukey HSD post hoc test. RESULTS: Statistical differences were found between instruments delivered in plastic boxes which bacterial count resulted higher than those obtained from instruments delivered in blisters (p<0.01). CONCLUSIONS: Some brand new endodontic instruments showed degrees of bacterial contamination that both quantitatively and qualitatively deserve to be considered in clinical procedures.


Subject(s)
Bacteria/isolation & purification , Dental Equipment/microbiology , Endodontics/instrumentation , Equipment Contamination , Nickel , Titanium , Humans , Sterilization
3.
Int Endod J ; 52(5): 737-745, 2019 May.
Article in English | MEDLINE | ID: mdl-30444531

ABSTRACT

AIM: To compare two different clinical techniques when using endodontic rotary instruments by monitoring the torque in vivo. METHODOLOGY: Ten single-rooted maxillary anterior teeth were prepared by an endodontist using size 25, .06 taper TF rotary instruments (KerrEndo, Orange, CA, USA). All instruments were rotated at 500 rpm with maximum torque set at 2.5 N cm using an endodontic motor (Kavo, Biberach, Germany), which automatically recorded the torque values every 1/10 of a second. Instruments were used with two modi operandi: (i) Inward action: short-length intermittent progression with slight apical pressure aiming to reach the working length (also known as pecking motion), followed by (ii) Outward action: lateral brushing action selectively directed to address the canal circumference whilst removing instruments in the coronal direction. The mean, maximum and accumulated torque values were recorded and analysed statistically (t-test and Wilcoxon test) with a significance level set at 5%. None of the recorded values exceeded the selected torque limit. RESULTS: A significant difference between inward and outward actions was found regarding the evaluated parameters (P < 0.05). The outward action (brushing) was significantly safer (requiring less torque) compared to the inward action (pecking). CONCLUSIONS: Torque measurements during in vivo instrumentation provided useful information regarding the techniques evaluated. Although the torque limit was not reached by any of the two actions, the technique impacted significantly on the torque applied to the instrument.


Subject(s)
Nickel , Root Canal Preparation , Equipment Design , Germany , Titanium , Torque
4.
Clin Ter ; 169(3): e96-e101, 2018.
Article in English | MEDLINE | ID: mdl-29938739

ABSTRACT

OBJECTIVES: Aim of the present study was twofold. First, to evaluate in vitro, the performance of two different NiTi rotary instruments in one molar case; then, to evaluate their resistance to cyclic fatigue, compared to new ones. MATERIAL AND METHODS: 25 ProTaper Next (PTN) nickel-titanium (NiTi) instruments (Maillefer-Dentsply, Baillagues, CH) for each of the following two sizes: X1 (17.04 ) and X2 (25.06) were randomly divided into two groups. The first group (n = 10) immediately under- went to a cyclic fatigue test. The second group (n = 15) was initially used to prepare 15 extracted molar teeth and then subjected to a cyclic fatigue test. Same was done for 25 Horizen (HZ) instruments (Kerr Endodontics, Orange, Ca) for each of the following two sizes: 20.04 and 25.06. Instruments were rotated in curved artificial canal until fracture occurred and times to fracture were recorded. All data were collected and statistically analyzed using a variance test (confidence interval CI = 95%). RESULTS: HZ reached working length more rapidly than PTN, and with less deformations. For the fatigue tests, all the new instruments were significantly more resistant than the used ones. The HZ instru- ments were significantly more resistant in all sizes than PTN, both when new and used instruments were tested. CONCLUSIONS: Since in previous studies ProTaper Next demonstra- ted a better resistance to cyclic fatigue than most of nickel-titanium instruments, Horizen's performance put them in a high rank amongst the most resistant nickel-titanium rotary instruments.


Subject(s)
Dental Alloys/chemistry , Materials Testing , Nickel/chemistry , Titanium/chemistry , Equipment Design , Equipment Failure , Humans , Root Canal Preparation , Rotation
5.
G Chir ; 38(1): 46-49, 2017.
Article in English | MEDLINE | ID: mdl-28460204

ABSTRACT

The internal carotid artery agenesis is a rare malformation disorder. We report the case of a 12-year-old boy suffering migraine, who had presented an episode featuring amaurosis fugax, spontaneously regressed. CT angiography images show hypoplasia of the left common carotid artery with loss of opacification of the left internal carotid artery consistent to agenesis. Moreover CT scans through the skull base demonstrate absence of left petrous carotid canal and an hypertrophic left middle cerebral artery originating from an aberrant artery arising from the right cavernous carotid. All diagnostic examinations confirmed the presence of the internal carotid artery agenesis, as Lie's type IV. We started an annual follow up that over the next 7 years did not reveal any change in magnetic resonance angiography images.


Subject(s)
Carotid Artery, Internal/abnormalities , Carotid Artery, Internal/diagnostic imaging , Child , Congenital Abnormalities/genetics , Humans , Magnetic Resonance Angiography , Male , Tomography, X-Ray Computed
6.
Clin Ter ; 168(1): e23-e27, 2017.
Article in English | MEDLINE | ID: mdl-28240758

ABSTRACT

OBJECTIVES: Previous studies showed that motor motions play an important role in determining apical extrusion of debris. Therefore a new clinical motion (MIMERACI) has been proposed. The basic idea is to progress slowly (1mm advancement), and after each 1mm, to remove the instrument from the canal, clean flutes and irrigate. The aim of the study was to prove whether the clinical use of MIMERACI technique would influence or not postoperative pain. MATERIALS AND METHODS: 100 teeth requesting endodontic treatment were selected for the study and divided into two similar groups based on anatomy, pre-operative symptoms and vitality, presence or absence of periapical lesion. All teeth were shaped, cleaned and obturated by the same operator, using the same NiTi instruments. The only difference between the two groups was the instrumentation technique: tradional (group A) vs MIMERACI (group B). Assessment of postoperative pain was performed 3 days after treatment. Presence, absence and degree of pain were recorded with a visual analogue scale (VAS), validated in previous studies. Collected data statistically analyzed using one-way ANOVA post hoc Tukey test. RESULTS: For VAS pain scores MIMERACI technique showed significantly better results than group A (p=0,031). Overall, both incidence and intensity of symptoms were significantly lower. Flare ups occurred in 3 patients, but none treated with the MIMERACI Technique. CONCLUSIONS: Since extruded debris can elicit more postoperative pain, results obtained by using MIMERACI technique are probably due to many factors: better mechanical removal and less production of debris and more efficient irrigation during instrumentation.


Subject(s)
Pain, Postoperative/epidemiology , Root Canal Preparation/methods , Adolescent , Adult , Aged , Humans , Incidence , Middle Aged , Nickel , Titanium , Tooth Apex , Young Adult
7.
J Cardiovasc Surg (Torino) ; 28(2): 112-9, 1987.
Article in English | MEDLINE | ID: mdl-3549739

ABSTRACT

The effects of protamine sulphate on several cardiorespiratory variables were studied under clinical situations in twenty patients following cardiopulmonary bypass. Because recent reports suggest that there may be advantages of intra-aortic versus intra-venous administration we prospectively evaluated cardiorespiratory features 1 and 10 minutes after rapid administering of protamine sulphate either into the aortic arch (through a catheter percutaneously inserted via the radial artery for monitoring purposes) or into the right atrium. Significant variations in some parameters were found in the patients receiving the drug via the aorta, such as a drop of systemic vascular resistances (p less than 0.05), of coronary perfusion pressure (p less than 0.05), of aortic systolic pressure (p less than 0.01), of diastolic (p less than 0.01) and mean blood pressure (p less than 0.05) and a rise in the respiratory quotient (p less than 0.05). It is concluded that the results do not confirm the superior safety of intra-aortic administration of protamine particularly when replenishment of intravascular volume is not provided.


Subject(s)
Cardiopulmonary Bypass , Hemodynamics/drug effects , Protamines/administration & dosage , Respiration/drug effects , Analysis of Variance , Aorta, Thoracic , Blood Pressure/drug effects , Blood Volume/drug effects , Clinical Trials as Topic , Heart Atria , Humans , Prospective Studies , Protamines/pharmacology , Pulmonary Artery , Time Factors , Vascular Resistance/drug effects
SELECTION OF CITATIONS
SEARCH DETAIL
...