Primary standardization and Monte Carlo modeling of (243Am + 239Np) by means of a 4π(PC)-γ coincidence counting system.

The procedure followed by the Nuclear Metrology Laboratory (LMN) at the IPEN for the primary standardization of a (243Am + 239Np) solution, in secular equilibrium, is described. The measurement was carried out in a 4π(PC) (α,ß)-γ coincidence system. The total activity per unit mass of the solution was determined by the extrapolation technique, using a software coincidence counting systsem. The extrapolation curves were compared with Monte Carlo calculations by means of Code ESQUEMA, used in previous works, which, was improved and applied in order to calculate the alpha, beta, gamma, X-rays and coincidence spectra.

Dietary replacement of soybean meal with heat-treated soybean meal or high-protein corn distillers grains on nutrient digestibility and milk composition in mid-lactation cows.

Lactation diets dependent on rumen undegradable protein (RUP) sources derived from soybean meal (SBM) products are generally high in Lys and poor in Met. We conducted an experiment to evaluate the effects of increasing dietary RUP and altering digestible AA supply by inclusion of heat-treated soybean meal (HTSBM) or high-protein corn dried distillers grains with soluble (DDGS) on performance in mid-lactation dairy cows. Twenty-four Holstein cows (200 ± 40 d in milk and 30.0 ± 3.92 kg/d of milk yield) blocked according to parity, milk yield, and days in milk were used in a 3 × 3 Latin square design experiment with 21-d periods. Treatments were (1) control (CON), a diet with 6.0% RUP containing 15.9% SBM as the main protein source; (2) HTSBM, a diet with 6.7% RUP containing 4.4% HTSBM partially replacing SBM; and (3) high-protein DDGS (FP; FlexyPro, SJC Bioenergia), a diet with 6.9% RUP containing 5.34% FP partially replacing SBM and ground corn. Diets had similar crude protein (16.9%) and net energy of lactation. Data were submitted to ANOVA using the mixed procedure of SAS software (SAS Institute Inc.). Treatment differences were evaluated using orthogonal contrasts: (1) increasing RUP (SBM vs. HTSBM + FP) and (2) altering digestible AA supply (HTSBM vs. FP). Cows fed HTSBM and FP had greater intake (values in parentheses represent treatment means of CON, HTSBM, and FP, respectively) of neutral detergent fiber (7.14, 7.35, and 7.69 kg/d), crude protein (4.27, 4.37, and 4.51 kg/d), and ether extract (0.942, 0.968, and 1.04 kg/d) compared with cows fed CON. Feeding FP resulted in greater intake of neutral detergent fiber and ether extract compared with HTSBM. Cows fed HTSBM and FP had lower sorting index for feed particles <4 mm than cows fed CON (1.029, 1.008, and 1.022). Feeding FP resulted in greater intake of feed particles <4 mm compared with HTSBM. Treatments containing HTSBM or FP tended to decrease organic matter digestibility (72.4, 71.2, and 71.1%), but no other effects were detected in digestibility of neutral detergent fiber, crude protein, or ether extract. No evidence for differences among treatments was detected in excretion of purine derivatives in milk and urine. Milk yield was greater in cows fed HTSBM or FP than in cows fed CON (28.0, 28.9, and 28.8 kg/d, respectively). Cows fed HTSBM or FP tended to have greater energy-corrected milk and protein yield compared with those fed CON. Milk protein concentration was greater in DDGS cows than those in the HTSBM group (3.45 and 3.40%, respectively). No differences were detected in milk fat yield and concentration, milk urea nitrogen, feed efficiency, or serum concentrations of urea and glucose. Overall, increasing dietary RUP by feeding HTSBM or FP improved intake of nutrients and milk yield without affecting feed efficiency. Altering digestible AA supply while maintaining similar dietary RUP had negligible effects on performance of cows.

Feeding encapsulated pepper to dairy cows during the hot season improves performance without affecting core and skin temperature.

Peppers (Capsicum spp.) contain capsaicin, an organic compound with a group of alkaloids that has shown thermoregulation properties in humans and mice, and may influence glucose and lipid metabolism in ruminants. An experiment was conducted to evaluate different doses of a feed additive containing encapsulated pepper on milk yield and composition, dry matter intake, feed sorting index, total-tract apparent digestibility of nutrients, purine derivatives excretion, and serum concentrations of urea-N and glucose, N excretion, respiration rate, rectal temperature, and skin temperature in different regions (forehead, face, and rumen). Thirty-six Holstein cows (150 ± 102.1 d in milk and 29.3 ± 5.81 kg/d milk yield) were used in a 9-wk randomized complete block (n = 12) design experiment. Following a 2-wk covariate period, cows were blocked according to parity, days in milk, and milk yield and were randomly assigned to the following treatments: 0 (CAP0), 0.75 (CAP75), or 1.5 (CAP150) g/d of a feed additive containing encapsulated pepper (1 g/kg, Capcin; NutriQuest) added to the concentrate along with minerals. Treatment differences were evaluated through orthogonal contrasts (CAP0 vs. CAP75 + CAP150 or CAP75 vs. CAP150). The average temperature-humidity index during the experiment was 72.0 ± 2.07. Dry matter intake was greater in cows fed a feed additive containing encapsulated pepper (CAP) treatments (CAP75 and CAP150) compared with CAP0. Cows fed CAP150 tended to have greater dry matter intake than those in CAP75 group. Feeding CAP decreased sorting for feed particles with size between 8 and 4 mm. An interaction effect between treatment and week was observed for crude protein digestibility whereas cows fed CAP150 had the greatest digestibility on the third week of experiment. Orthogonal contrasts did not detect differences in serum concentrations of glucose and urea-N, or purine derivatives excretion. Nitrogen excretion (as % of N intake) in milk, urine, and feces was not altered by treatments. Feeding CAP increased yields of 3.5% fat-corrected milk, fat, protein, and lactose. A tendency toward greater milk protein content was observed for cows fed CAP150 than CAP75. No differences were detected on respiration rate, rectal temperature, and skin temperature of cows. A feed additive containing encapsulated pepper fed at 0.75 or 1.5 g/d can improve yield of fat-corrected milk and milk solids by increasing feed intake without affecting nutrient digestibility and body temperature of lactating cows during the hot season.

Increasing doses of carbohydrases: Effects on rumen fermentation, nutrient digestibility, and performance of mid-lactation cows.

The objective of this study was to evaluate the effects of exogenous enzymes on nutrient intake and digestibility, rumen fermentation, and productivity of mid-lactating cows. Experiment 1 was designed to test increasing doses [0, 0.5, 1.0, or 1.5 g/kg of dry matter (DM)] of a combination of 2 enzyme products with xylanase and ß-glucanase activities (Ronozyme Wx and Ronozyme VP, respectively; DSM Nutritional Products) on rumen fermentation and total apparent digestibility. Enzyme combinations had a ratio of endo-1,3(4)-ß-glucanase to endo-1,4-ß-xylanase of 8:2 (wt/wt). For experiment 1, 8 rumen cannulated lactating cows were used into a double 4 × 4 Latin square design experiment with 14 d of diet adaptation and 7 d of sampling. Despite no differences in feed intake, carbohydrases linearly increased neutral detergent fiber digestibility. Treatments marginally affected rumen fermentation, where a linear trend for lower rumen pH and a linear trend for greater isobutyrate concentration were observed with increasing enzyme dose. A trend for lower rumen NH3-N concentration was observed for cows receiving carbohydrases in comparison with control group. When comparing all enzyme treatments against control group, cows fed enzymes tended to produce more 3.5% fat-corrected milk (FCM), produced more milk fat, and had greater blood glucose concentration. Experiment 2 evaluated 3 doses (0, 0.5, or 0.75 g/kg of DM) of the same combination of enzyme products on performance of cows (n = 36) in a complete randomized block (n = 12) design. Cows received treatments for 9 wk. No interaction effects between treatments and time were observed for all variables assessed in this study. In agreement with experiment 1, no differences were detected for feed intake, but cows fed the enzyme products tended to produce more 3.5% FCM and milk fat compared with control. In addition, cows fed enzymes exhibited greater efficiency of FCM production (FCM ÷ DM intake) compared with control. No differences were detected for intake and productivity when comparing the 2 doses of carbohydrases. In summary, the enzyme products tested in this study may improve feed efficiency due to greater milk fat concentration.

Effects of a blend of live yeast and organic minerals or monensin on performance of dairy cows during the hot season.

The objective of this study was to evaluate the effects of feed additives on intake and digestibility of nutrients, milk yield and composition, feeding behavior, and physiological parameters of dairy cows during the hot season. Forty Holstein cows were assigned to a randomized block design experiment with a 2 × 2 factorial treatment arrangement to evaluate (1) control diet without inclusion of additives; (2) monensin (MON), 20 mg/kg diet dry matter sodium monensin (Rumensin; Elanco); (3) Milk Sacc+ (MS+), inclusion of 40 g/cow per d of Milk Sacc+ (a blend of live yeast and organic minerals, Alltech); and (4) combination of MON and MS+. The average temperature-humidity index throughout the experimental period was 73 ± 2.84 (standard deviation). The experiment lasted 11 wk, including 2 preliminary weeks for covariate adjustments. Cows fed MS+ increased dry matter intake (% body weight), milk yield, 3.5% fat-corrected milk, and solids yield, and cows fed MON had greater milk urea nitrogen content in comparison with counterparts. Feeding MS+ increased the intake of feed particles with size between 8 and 19 mm and decreased the intake of particles shorter than 4 mm compared with other treatments. Rumination time (min/d) and chewing time (min/kg of neutral detergent fiber) were lower for cows fed MS+. Physiologic parameters (i.e., heart and respiratory rates, and body temperature) were not affected by the treatments. Overall, the use of monensin did not differ from control, and Milk Sacc+ improved performance of cows.

Partial replacement of corn silage with whole-plant soybean and black oat silages for dairy cows.

This study aimed to evaluate the effects of partially replacing corn silage (CS) with whole-plant soybean silage (SS) or black oat silage (OS) on nutrient intake and digestibility, in vitro neutral detergent fiber degradability of silages, feeding behavior, rumen fermentation, and performance of dairy cows. Twenty-four lactating Holstein cows (6 of which were rumen-cannulated) with 32.5 ± 4.92 kg/d milk yield, 150 ± 84.8 days in milk, and 644 ± 79.0 kg of body weight were used in a 3 × 3 Latin square design to evaluate the following treatments: (1) corn silage diet (CSD): using corn silage as the only forage source in the diet [48% dietary dry matter (DM)]; (2) whole-plant soybean silage diet (SSD): SS replacing 16% of corn silage from CSD; and (3) black oat silage diet (OSD): OS replacing 16% of corn silage from CSD. The inclusion of OS and SS decreased intakes of DM, organic matter, and crude protein. Corn silage had the greatest in vivo effective degradability of DM, and SS had the least effective degradability of neutral detergent fiber. The OSD treatment decreased milk and protein yields, whereas SSD increased rumen ammonia nitrogen concentration compared with the other diets. Cows fed OSD exhibited a greater preference for feed with small particles (<4 mm) compared with those fed SSD. Cows fed treatments containing either SS or OS at the expense of CS had increased rumination and chewing activities. Although replacing CS with OS and SS reduced feed intake, SS had no effect on productive performance of dairy cows.

Effects of organic acids in total mixed ration and feeding frequency on productive performance of dairy cows.

This study aimed to evaluate the effects of organic acid (OA; Mold-Zap, Alltech, Nicholasville, KY) inclusion in the total mixed ration (TMR) and feeding frequency of TMR for lactating dairy cows on intake, total-tract apparent digestibility, sorting index, feeding behavior, ruminal fermentation, milk yield and composition, nitrogen balance, and serum metabolites. Twenty-four lactating Holstein cows, 4 with rumen cannulas, with (mean ± standard error) 247 ± 22.2 d in milk, 672 ± 14.6 kg of body weight, and 31.1 ± 1.09 kg of milk yield at the beginning of the experiment were used. The cows were distributed in a balanced and contemporary 4 × 4 Latin square experimental design and randomly assigned in a 2 × 2 factorial arrangement to evaluate OA [0 (OA-) or 0.5 (OA+) L of Mold-Zap/tonne of TMR on a natural matter basis] and feeding frequency of TMR offered once a day (1×) or twice a day (2×). Each experimental period lasted 21 d, with 14 d for acclimation and 7 d for data collection. The treatments were tested for TMR, in which its temperature was recorded every 2 h through a 24-h period in each experimental period. Organic acid-treated TMR showed a lower temperature during the 24-h period compared with nontreated TMR. The OA and feeding frequency had no effect on intake and total-tract apparent digestibility of dry matter and nutrients, aside from a tendency to increase neutral detergent fiber digestibility in cows fed 2×. Also, cows fed 1× tended to select more particles between 19 and 8 mm and refused particles smaller than 4 mm, whereas cows fed OA tended to select more particles smaller than 4 mm. Cows fed OA had greater milk yield and milk protein and lactose yields, but tended to have higher 3.5% fat-corrected milk yield. Neither treatment influenced ruminal and serum variables nor milk fat yield and milk production efficiency. Cows fed OA spent less time idling and tended to have lower rumination time, and tended to have higher time spent drinking water and eating, whereas animals fed 1× spent more time drinking water. Under the conditions of this experiment, we conclude that it was possible to reduce the feeding frequency of TMR, without negative effects on dairy cow performance. However, the use of OA resulted in higher milk yield and mitigated TMR temperature rise regardless of feeding frequency. The effect of external factors such as collective stimulation of intake and stage of lactation on feeding frequency effect must be surveyed in further research.

Increasing dietary levels of docosahexaenoic acid-rich microalgae: Ruminal fermentation, animal performance, and milk fatty acid profile of mid-lactating dairy cows.

This study aimed to evaluate the effects of increasing dietary levels of microalgae (ALG), rich in docosahexaenoic acid (DHA; All-G-Rich, Alltech, Nicholasville, KY), in isolipidic diets, on animal performance, nutrient digestibility, ruminal fermentation, milk fatty acid profile, energy balance, microbial protein synthesis, and blood serum metabolites in mid-lactating dairy cows. Twenty-four Holstein cows [130.3 ± 15.4 d in milk, and 30.8 ± 0.543 kg/d of milk yield (mean ± standard error)] were used in a 4 × 4 Latin square design experiment to evaluate the following treatments: control diet, without addition of ALG; and increasing levels of ALG [2, 4, and 6 g/kg of dry matter (DM)]. The ALG decreased DM intake and increased total-tract DM apparent digestibility. A tendency was observed for a quadratic effect on total-tract NDF digestibility by ALG inclusion, with peak value of the quadratic response at 4.13 g/kg of DM dose. Moreover, ALG increased ruminal pH and decreased acetate and total volatile fatty acid concentrations. Fat-corrected milk and energy-corrected milk were quadratically affected, and a tendency for a milk yield effect was observed when ALG levels increased, whereas maximal yields were observed with intermediate doses. Milk fat, protein, and lactose concentrations were diminished, whereas productive efficiency was improved by the increase of ALG levels. Saturated fatty acid proportions were decreased, whereas polyunsaturated fatty acid proportions were increased when ALG was fed. There was low DHA transfer into milk; however, ALG inclusion decreased C18:0, C18:1 cis-9, C18:2 cis-9,12, and C18:3 cis-9,12,15 proportions, and increased C18:2 cis-9,trans-11, C18:1 trans-9, and C18:1 trans-11 proportions. Gross energy intake was decreased, whereas no effect was observed on digestible, metabolizable, or net energy intake. The ALG inclusion quadratically affected the microbial protein synthesis, with maximal enhancement at 3.24 g/kg of DM dose, and also increased serum cholesterol concentration. Under the conditions of this experiment, the inclusion of ALG in diets for mid-lactating dairy cows decreased feed intake and increased nutrient digestibility, improving productive efficiency and modifying milk fatty acid profile. Estimated intermediate doses (1.22 to 2.90 g/kg of DM) of DHA-rich ALG may be beneficial to milk, fat-corrected milk, and energy-corrected milk yields, and is recommended for dairy cows.

Effects of exogenous fibrolytic and amylolytic enzymes on ruminal fermentation and performance of mid-lactation dairy cows.

Lactation diets are composed mostly of carbohydrates that are not fully fermented by rumen microbes. The aim of this study was to evaluate exogenous fibrolytic (Fibrozyme, Alltech Inc., Nicholasville, KY) and amylolytic (Amaize, Alltech Inc.) enzymes on nutrient intake, sorting index, total-tract apparent digestibility, ruminal fermentation, nitrogen utilization, milk yield, and composition of dairy cows in mid-lactation. Thirty-two multiparous Holstein cows (181 ± 35 d in milk, 571 ± 72.7 kg of body weight, and 29.6 ± 5.24 kg/d of milk yield at the start of experiment) were blocked according to milk yield and randomly allocated to treatments in a 4 × 4 Latin square design. Treatments were (1) control, basal diet without exogenous enzymes; (2) fibrolytic enzyme (FIB), dietary supplementation of Fibrozyme at 12 g/d (51 IU of xylanase activity/kg of diet dry matter); (3) amylolytic enzyme (AMY), dietary supplementation of Amaize at 8 g/d (203 fungal amylase units/kg of diet dry matter); and (4) both fibrolytic and amylolytic enzymes (FIB+AMY) added at the same dose of the individual treatments. Enzyme products were added to the concentrate during its preparation (once a week). The supply of FIB and AMY had no effect on nutrient intake and digestibility. However, an interaction effect was observed on sorting index of feed particle size between 8 and 19 mm. Amylolytic enzyme increased the sorting for feed particles between 8 and 19 mm, only when fed without FIB. In addition, AMY decreased the sorting for feed with particle size greater than 19 mm. An interaction effect was observed between FIB and AMY for ruminal butyrate concentration and N excretion. Amylolytic enzyme increased ruminal butyrate concentration in cows treated with FIB. Further, FIB decreased milk protein production and feed efficiency only in cows not fed AMY. Amylolytic enzyme reduced urinary N excretion. Exogenous enzymes had no effect on milk production and composition of dairy cows. This study lacks evidence that fibrolytic and amylolytic enzymes can affect nutrient digestibility, ruminal fermentation, and performance of mid-lactation cows.

Standardization and determination of the total internal conversion coefficient of In-111.

The standardization of (111)In by means of a 4πß-γ coincidence system, composed of a proportional counter in 4π geometry, coupled to a 20% relative efficiency HPGe crystal, for measuring gamma-rays is presented. The data acquisition was performed by means of the software coincidence system (SCS) and the activity was determined by the extrapolation technique. Two gamma-ray windows were selected: at 171 keV and 245 keV total absorption peaks, allowing the determination of the total internal conversion coefficient for these two gamma transitions. The results were compared with those available in the literature.

Determination of gamma-ray emission probabilities per decay of Ga-68.

The measurement of the gamma-ray emission probabilities per decay of 1077 keV of (68)Ga is presented. The standardization system consists of a gas-flow proportional counter in 4π geometry coupled to an HPGe detector for the gamma-ray detection. The gamma-ray emission probabilities per decay were measured in an HPGe gamma-ray spectrometer. The weaker gamma-ray intensities of (68)Ga were measured in a relative way, making use of an uncalibrated ampoule of (68)Ge-(68)Ga in radioactive equilibrium, and considering the absolute result from the 1077 keV gamma-ray.

Primary standardization of 57Co.

This work describes the method developed by the Nuclear Metrology Laboratory in IPEN, São Paulo, Brazil, for the standardization of a (57)Co radioactive solution. Cobalt-57 is a radionuclide used for calibrating gamma-ray and X-ray spectrometers, as well as a gamma reference source for dose calibrators used in nuclear medicine services. Two 4pibeta-gamma coincidence systems were used to perform the standardization, the first used a 4pi(PC) counter coupled to a pair of 76 mm x 76 mm NaI(Tl) scintillators for detecting gamma-rays, the other one used a HPGe spectrometer for gamma detection. The measurements were performed by selecting a gamma-ray window comprising the (122 keV+136 keV) total absorption energy peaks in the NaI(Tl) and selecting the total absorption peak of 122 keV in the germanium detector. The electronic system used the TAC method developed at LMN for registering the observed events. The methodology recently developed by the LMN for simulating all detection processes in a 4pibeta-gamma coincidence system, by means of the Monte Carlo technique, was applied and the behavior of extrapolation curve compared to experimental data. The final activity obtained by the Monte Carlo calculation agrees with the experimental results within the experimental uncertainty.

Standardization and measurement of gamma-ray probability per decay of 177Lu.

The procedure followed by the Nuclear Metrology Laboratory (LMN), at the Nuclear and Energy Research Institute (IPEN), for the primary standardization of (177)Lu is described. This radionuclide is widely used in radiopharmacy due to its convenient half-life and emitted beta ray energies. The (177)Lu solution was supplied during an international comparison sponsored by BIPM in 2009 and the primary standardization has been accomplished by the 4pibeta-gamma coincidence method using a proportional counter in 4pi geometry coupled with two NaI(Tl) scintillation counters. The beta efficiency was varied by placing Collodion and aluminum absorbers over and under the radioactive source. The (177)Lu calibrated sources were also measured in a previously calibrated HPGe spectrometer, in order to obtain the emission probability per decay for the selected gamma-ray transitions. The experimental extrapolation curves were also compared with Monte Carlo simulations by means of code ESQUEMA developed at the LMN.

Monte Carlo simulation to positron emitter standardized by means of 4pibeta-gamma coincidence system--application to 22Na.

The present work describes the methodology for predicting the behavior of extrapolation curves obtained in radionuclide standardization by 4pibeta-gamma coincidence measurements, applied to (22)Na, developed at the Laboratório de Metrologia Nuclear of IPEN-CNEN/SP (LMN-Nuclear Metrology Laboratory). The LMN system consists of a proportional counter (PC) in 4pi geometry coupled to a single or a pair of NaI(Tl) scintillation crystals. Two standardization techniques were used: the Sum-Peak and the Nuclear-Peak methods. The theoretical response functions of each detector have been calculated using the MCNPX Monte Carlo code. The code ESQUEMA, developed at LMN, has been used for calculating the extrapolation curve in the 4pibeta-gamma coincidence experiment. Modifications were performed in order to include response tables for positrons and coincidences with annihilation photons. From the calibration results it was possible to extract both the activity value and the positron emission probability per decay. The latter was compared with results from the literature.

Comparative measurements in dose calibrators and a gamma-ray spectrometer.

Specific activity results of (51)Cr, (67)Ga, (99m)Tc and (201)Tl radioactive solutions, measured in different dose calibrators located at nuclear medicine services and in a calibrated HPGe gamma spectrometer, were compared. The HPGe spectrometer was calibrated in a well defined geometry by means of (60)Co, (133)Ba, (152)Eu, (166m)Ho and (241)Am sources, previously standardized in a 4pibeta-gamma coincidence system. Despite the observed differences, the results may be accepted within the 10% uncertainty range, established by Brazilian regulatory standards.

Determination of the neutron spectrum shape parameter alpha in k0 NAA methodology using covariance analysis.

The k(0) method for quantitative reactor neutron activation analysis (NAA) has been applied in several laboratories for the determination of multi-elemental concentrations in different materials. The general formula that yields the concentration value can be divided in two parts: one involving detection parameters and the other involving irradiation parameters. A rigorous uncertainty calculation must take into account the correlations between each of these parameters. The Nuclear Metrology Laboratory at IPEN has a research program intended to develop a methodology applying covariance analysis in order to obtain the overall uncertainty in the concentrations of different elements in a given sample, and the correlation between each pair of them. The present paper concentrates in the determination of the neutron spectrum shape factor alpha by two methods: Cd-covered and Cd-ratio, using experimental data obtained in the IEA-R1 research reactor. The final values for alpha were: (0.001+/-0.018) and (0.001+/-0.019) for the Cd-covered and Cd-ratio methods, respectively, in good agreement with each other.

Determination of 51Cr and 241Am X-ray and gamma-ray emission probabilities per decay.

In this paper results of X-ray and gamma-ray emission probabilities per decay of (51)Cr and (241)Am are presented. The measurements were carried out by means of HPGe planar and REGe spectrometers. The activity of (51)Cr and (241)Am samples was determined in a 4pibeta-gamma coincidence counting system. The HPGe spectrometers were calibrated in a well defined geometry by means of (54)Mn, (55)Fe, (57)Co, (133)Ba, (152)Eu, (166m)Ho and (241)Am sources, previously standardized in a 4pibeta-gamma coincidence system. The MCNP Monte Carlo code was used for simulation of the REGe spectrometer calibration curve, for the selected geometry, and compared with the experimental curve. The experimental results were compared with data from literature.

Disintegration rate measurement of (182)Ta.

Measurement of the activity of (182)Ta sources produced by irradiation at the IPEN research reactor was performed in a 4pibeta-gamma coincidence system by using the extrapolation technique. The measurements were undertaken selecting two windows in the gamma-channel, in order to check the consistency of the results. A Monte Carlo calculation was performed in order to predict the behavior of the observed activity as a function of the 4pibeta detector efficiency and the results were compared with experimental values.

Standardization of 241Am solution.

The standardization of 241 Am solution has been undertaken using a 4pibeta-gamma coincidence system. The 4pi proportional counter used for alpha detection has a 0.1 mm thick Al window in the outside wall in order to minimize gamma-ray attenuation. The extrapolation technique was applied to determine the activity of the solution. The variation of alpha efficiency has been made using external absorbers and by the electronic discrimination. The results from the two methods were compared and are in agreement within the experimental uncertainty.