Preparative Mass Spectrometry Using a Rotating-Wall Mass Analyzer.

The design of functional interfaces is central to both fundamental and applied research in materials science and energy technology. We introduce a new, broadly applicable technique for the precisely controlled high-throughput preparation of well-defined interfaces containing polyatomic species ranging from small ions to nanocrystals and large protein complexes. The mass-dispersive deposition of ions onto surfaces is achieved using a rotating-wall mass analyzer, a compact device which enables the separation of ions using low voltages and has a theoretically unlimited mass range. We demonstrate an efficient deposition of singly charged Au144 (SC4 H9 )60 ions (33.7 kDa), which opens up exciting opportunities for the structural characterization of nanocrystals and their assemblies using transmission electron microscopy. Our approach also enables the high-throughput deposition of mass-selected ions from multicomponent mixtures, which is of interest to the controlled preparation of surface gradients and rapid screening of molecules in mixtures for a specific property.

Solution-Phase Activation and Functionalization of Colloidal WS2 Nanosheets with Ni Single Atoms.

Single-atom functionalization of transition-metal dichalcogenide (TMD) nanosheets is a powerful strategy to tune the optical, magnetic, and catalytic properties of two-dimensional materials. In this work, we demonstrate a simple solution-phase method to generate nucleophilic sulfide sites on colloidal WS2 nanosheets that subsequently serve as ligands for Ni single atoms. These materials can be controllably functionalized with varying amounts of Ni on the surface ranging from 9% to 47% coverage with respect to W. High-resolution scanning transmission electron microscopy coupled to electron energy loss spectroscopy and X-ray absorption spectroscopy indicate that adsorbed Ni species bind as single atoms at low coverage and a mixture of single atoms and multimetallic clusters at high coverage. The Ni single atoms adsorbed on WS2 show altered electronic properties, and both the electronic perturbation and isolated atom geometry play a role in enhancing the intrinsic catalytic activity of Ni-WS2 samples for the electrochemical oxygen evolution reaction.

Aggregation vs Surface Segregation: Antagonism over the Magnetic Behavior of NiCr Nanoparticles.

Annealing is a valuable method for fine-tuning the ultrasmall magnetic properties of alloy nanoparticles (NPs) by controlling their sizes, modifying their surfaces, and affecting their magnetic interactions. Herein, we study the effect of moderate annealing (450 °C) on strongly interacting NiCr nanoparticle assemblies (0 ≤ atom % Cr ≤ 15) immediately after deposition. Concurrent temperature-dependent electron microscopy and magnetization data demonstrate the interplay of two competing factors, namely, enhanced particle aggregation and element-specific surface segregation, on the magnetic properties, with the former boosting and the latter suppressing them. Strong interparticle interactions can lead to a magnetic response different from that of superparamagnetic particles, namely, from canonical spin-glass (0 atom % Cr) to correlated spin-glass (5-15 atom % Cr) behavior below higher spin-glass transition temperatures T g (20-350 K). The observation of "high-field susceptibility" below cryogenic temperatures (≤20 K) is ascribed to the presence of inhomogeneity/defects caused by Cr segregation. This work emphasizes the necessity of taking into account the delicate balance of such competing factors to understand the magnetic properties of nanoparticulate samples.

Ballistic superconductivity and tunable π-junctions in InSb quantum wells.

Planar Josephson junctions (JJs) made in semiconductor quantum wells with large spin-orbit coupling are capable of hosting topological superconductivity. Indium antimonide (InSb) two-dimensional electron gases (2DEGs) are particularly suited for this due to their large Landé g-factor and high carrier mobility, however superconducting hybrids in these 2DEGs remain unexplored. Here we create JJs in high quality InSb 2DEGs and provide evidence of ballistic superconductivity over micron-scale lengths. A Zeeman field produces distinct revivals of the supercurrent in the junction, associated with a 0-π transition. We show that these transitions can be controlled by device design, and tuned in-situ using gates. A comparison between experiments and the theory of ballistic π-Josephson junctions gives excellent quantitative agreement. Our results therefore establish InSb quantum wells as a promising new material platform to study the interplay between superconductivity, spin-orbit interaction and magnetism.

Kinetic trapping through coalescence and the formation of patterned Ag-Cu nanoparticles.

In recent years, due to its inherent flexibility, magnetron-sputtering has been widely used to synthesise bi-metallic nanoparticles (NPs) via subsequent inert-gas cooling and gas-phase condensation of the sputtered atomic vapour. Utilising two separate sputter targets allows for good control over composition. Simultaneously, it involves fast kinetics and non-equilibrium processes, which can trap the nascent NPs into metastable configurations. In this study, we observed such configurations in immiscible, bi-metallic Ag-Cu NPs by scanning transmission electron microscopy (S/TEM) and electron energy-loss spectroscopy (EELS), and noticed a marked difference in the shape of NPs belonging to Ag- and Cu-rich samples. We explained the formation of Janus or Ag@Cu core/shell metastable structures on the grounds of in-flight mixed NP coalescence. We utilised molecular dynamics (MD) and Monte Carlo (MC) computer simulations to demonstrate that such configurations cannot occur as a result of nanoalloy segregation. Instead, sintering at relatively low temperatures can give rise to metastable structures, which eventually can be stabilised by subsequent quenching. Furthermore, we compared the heteroepitaxial diffusivities along various surfaces of both Ag and Cu NPs, and emphasised the differences between the sintering mechanisms of Ag- and Cu-rich NP compositions: small Cu NPs deform as coherent objects on large Ag NPs, whereas small Ag NPs dissolve into large Cu NPs, with their atoms diffusing along specific directions. Taking advantage of this observation, we propose controlled NP coalescence as a method to engineer mixed NPs of a unique, patterned core@partial-shell structure, which we refer to as a "glass-float" (ukidama) structure.

Control of Surface Segregation in Bimetallic NiCr Nanoalloys Immersed in Ag Matrix.

Cr-surface segregation is a main roadblock encumbering many magneto-biomedical applications of bimetallic M-Cr nanoalloys (where M = Fe, Co and Ni). To overcome this problem, we developed Ni95Cr5:Ag nanocomposite as a model system, consisting of non-interacting Ni95Cr5 nanoalloys (5 ± 1 nm) immersed in non-magnetic Ag matrix by controlled simultaneous co-sputtering of Ni95Cr5 and Ag. We employed Curie temperature (TC) as an indicator of phase purity check of these nanocomposites, which is estimated to be around the bulk Ni95Cr5 value of 320 K. This confirms prevention of Cr-segregation and also entails effective control of surface oxidation. Compared to Cr-segregated Ni95Cr5 nanoalloy films and nanoclusters, we did not observe any unwanted magnetic effects such as presence Cr-antiferromagnetic transition, large non-saturation, exchange bias behavior (if any) or uncompensated higher TC values. These nanocomposites films also lose their unique magnetic properties only at elevated temperatures beyond application requirements (≥800 K), either by showing Ni-type behavior or by a complete conversion into Ni/Cr-oxides in vacuum and air environment, respectively.

Surface Structure of Aerobically Oxidized Diamond Nanocrystals.

We investigate the aerobic oxidation of high-pressure, high-temperature nanodiamonds (5-50 nm dimensions) using a combination of carbon and oxygen K-edge X-ray absorption, wavelength-dependent X-ray photoelectron, and vibrational spectroscopies. Oxidation at 575 °C for 2 h eliminates graphitic carbon contamination (>98%) and produces nanocrystals with hydroxyl functionalized surfaces as well as a minor component (<5%) of carboxylic anhydrides. The low graphitic carbon content and the high crystallinity of HPHT are evident from Raman spectra acquired using visible wavelength excitation (λexcit = 633 nm) as well as carbon K-edge X-ray absorption spectra where the signature of a core-hole exciton is observed. Both spectroscopic features are similar to those of chemical vapor deposited (CVD) diamond but differ significantly from the spectra of detonation nanodiamond. The importance of these findings to the functionalization of nanodiamond surfaces for biological labeling applications is discussed.

An in situ transmission electron microscopy study of sintering and redispersion phenomena over size-selected metal nanoparticles: environmental effects.

The thermal and chemical stability of micelle-synthesized size-selected Pt nanoparticles (NPs) supported on thin SiO2 (20 nm) films was monitored in situ via transmission electron microscopy (TEM) under pure hydrogen and pure oxygen environments. The coarsening treatment was performed for 30 min at each temperature (1 Torr of either O2 or H2), while the TEM measurements were carried out at 1 Torr of H2 and 0.5 Torr of O2. Surprisingly, the NPs were found to be stable against sintering under both gaseous atmospheres up to 650 °C. Nevertheless, drastic sintering via diffusion-coalescence was observed upon annealing in H2 at 800 °C. In contrast, an identically prepared sample demonstrated lack of agglomeration at the same temperature under O2. The latter observation is ascribed to a strengthened chemical bond at the NP/support interface due to the formation of PtOx species at low temperature. Subsequently, oxidative NP redispersion - associated with some loss of Pt due to the formation of volatile PtOx species - is inferred from the behavior in O2 at/above 650 °C. In contrast, SiO2 reduction catalyzed by the presence of the Pt NPs and Pt silicide formation was found in H2 at 800 °C, which might play a role in the enhanced coarsening observed. Subsequent exposure of the PtSi NPs to oxygen led to the formation of Pt-SiO2 core-shell structures. Our findings highlight the dynamic structural transformations that nanoscale materials experience under different environments and the important role played by their initial size, size distribution and dispersion on their stability against sintering.

A facile single-step synthesis of ternary multicore magneto-plasmonic nanoparticles.

We report a facile single-step synthesis of ternary hybrid nanoparticles (NPs) composed of multiple dumbbell-like iron-silver (FeAg) cores encapsulated by a silicon (Si) shell using a versatile co-sputter gas-condensation technique. In comparison to previously reported binary magneto-plasmonic NPs, the advantage conferred by a Si shell is to bind the multiple magneto-plasmonic (FeAg) cores together and prevent them from aggregation at the same time. Further, we demonstrate that the size of the NPs and number of cores in each NP can be modulated over a wide range by tuning the experimental parameters.

Control of metal nanocrystal size reveals metal-support interface role for ceria catalysts.

Interactions between ceria (CeO2) and supported metals greatly enhance rates for a number of important reactions. However, direct relationships between structure and function in these catalysts have been difficult to extract because the samples studied either were heterogeneous or were model systems dissimilar to working catalysts. We report rate measurements on samples in which the length of the ceria-metal interface was tailored by the use of monodisperse nickel, palladium, and platinum nanocrystals. We found that carbon monoxide oxidation in ceria-based catalysts is greatly enhanced at the ceria-metal interface sites for a range of group VIII metal catalysts, clarifying the pivotal role played by the support.

Engineering catalytic contacts and thermal stability: gold/iron oxide binary nanocrystal superlattices for CO oxidation.

Well-defined surface, such as surface of a single crystal, is being used to provide precise interpretation of catalytic processes, while the nanoparticulate model catalyst more closely represents the real catalysts that are used in industrial processes. Nanocrystal superlattice, which combines the chemical and physical properties of different materials in a single crystalline structure, is an ideal model catalyst, that bridge between conventional models and real catalysts. We identify the active sites for carbon monoxide (CO) oxidation on Au-FeO(x) catalysts by using Au-FeO(x) binary superlattices correlating the activity to the number density of catalytic contacts between Au and FeO(x). Moreover, using nanocrystal superlattices, we propose a general strategy of keeping active metals spatially confined to enhance the stability of metal catalysts. With a great range of nanocrystal superlattice structures and compositions, we establish that nanocrystal superlattices are useful model materials through which to explore, understand, and improve catalytic processes bridging the gap between traditional single crystal and supported catalyst studies.

Heterogeneous catalysts need not be so "heterogeneous": monodisperse Pt nanocrystals by combining shape-controlled synthesis and purification by colloidal recrystallization.

Well-defined surfaces of Pt have been extensively studied for various catalytic processes. However, industrial catalysts are mostly composed of fine particles (e.g., nanocrystals), due to the desire for a high surface to volume ratio. Therefore, it is very important to explore and understand the catalytic processes both at nanoscale and on extended surfaces. In this report, a general synthetic method is described to prepare Pt nanocrystals with various morphologies. The synthesized Pt nanocrystals are further purified by exploiting the "self-cleaning" effect which results from the "colloidal recrystallization" of Pt supercrystals. The resulting high-purity nanocrystals enable the direct comparison of the reactivity of the {111} and {100} facets for important catalytic reactions. With these high-purity Pt nanocrystals, we have made several observations: Pt octahedra show higher poisoning tolerance in the electrooxidation of formic acid than Pt cubes; the oxidation of CO on Pt nanocrystals is structure insensitive when the partial pressure ratio p(O2)/p(CO) is close to or less than 0.5, while it is structure sensitive in the O(2)-rich environment; Pt octahedra have a lower activation energy than Pt cubes when catalyzing the electron transfer reaction between hexacyanoferrate (III) and thiosulfate ions. Through electrocatalysis, gas-phase-catalysis of CO oxidation, and a liquid-phase-catalysis of electron transfer reaction, we demonstrate that high quality Pt nanocrystals which have {111} and {100} facets selectively expose are ideal model materials to study catalysis at nanoscale.

Shape-controlled synthesis of Pt nanocrystals: the role of metal carbonyls.

Well-controlled synthesis of nanocrystals is necessary to unambiguously correlate the structural properties of nanocrystals with the catalytic properties. The most common low-index surfaces are (111) and (100). Therefore, model materials with {111} and {100} facets are highly desirable, in order to understand the catalytic properties of (111) and (100) surfaces for various structure-sensitive reactions. We report a solution-phase synthesis using metal carbonyls as additives. This synthetic method produces highly monodisperse Pt octahedra and icosahedra as the model of Pt{111}, Pt cubes as the model of Pt{100}, respectively. Several other morphologies, such as truncated cubes, cuboctahedra, spheres, tetrapods, star-shaped octapods, multipods, and hyper-branched structure, are produced, as well. A bifunctional role of metal carbonyl in the synthesis is identified: zerovalent transition metal decomposed from metal carbonyl acts as a shape-directing agent, while CO provides the reducing power. These high-quality shape-controlled Pt nanocrystals are suitable for model catalyst studies.

Design of Pt-Pd binary superlattices exploiting shape effects and synergistic effects for oxygen reduction reactions.

Large-area icosahedral-AB(13)-type Pt-Pd binary superlattices (BNSLs) are fabricated through self-assembly of 6 nm Pd nanocrystals (NCs) and 13 nm Pt octahedra at a liquid-air interface. The Pt-Pd BNSLs enable a high activity toward electrocatalysis of oxygen reduction reaction (ORR) by successfully exploiting the shape effects of Pt NCs and synergistic effects of Pt-Pd into a single crystalline nanostructure. The Pt-Pd BNSLs are promising catalysts for the oxygen electrode of fuel cells.

Revealing correlation of valence state with nanoporous structure in cobalt catalyst nanoparticles by in situ environmental TEM.

Simultaneously probing the electronic structure and morphology of materials at the nanometer or atomic scale while a chemical reaction proceeds is significant for understanding the underlying reaction mechanisms and optimizing a materials design. This is especially important in the study of nanoparticle catalysts, yet such experiments have rarely been achieved. Utilizing an environmental transmission electron microscope equipped with a differentially pumped gas cell, we are able to conduct nanoscopic imaging and electron energy loss spectroscopy in situ for cobalt catalysts under reaction conditions. Studies reveal quantitative correlation of the cobalt valence states with the particles' nanoporous structures. The in situ experiments were performed on nanoporous cobalt particles coated with silica, while a 15 mTorr hydrogen environment was maintained at various temperatures (300-600 °C). When the nanoporous particles were reduced, the valence state changed from cobalt oxide to metallic cobalt and concurrent structural coarsening was observed. In situ mapping of the valence state and the corresponding nanoporous structures allows quantitative analysis necessary for understanding and improving the mass activity and lifetime of cobalt-based catalysts, for example, for Fischer-Tropsch synthesis that converts carbon monoxide and hydrogen into fuels, and uncovering the catalyst optimization mechanisms.

Highly active Pt3Pb and core-shell Pt3Pb-Pt electrocatalysts for formic acid oxidation.

Formic acid is a promising chemical fuel for fuel cell applications. However, due to the dominance of the indirect reaction pathway and strong poisoning effects, the development of direct formic acid fuel cells has been impeded by the low activity of existing electrocatalysts at desirable operating voltage. We report the first synthesis of Pt(3)Pb nanocrystals through solution phase synthesis and show they are highly efficient formic acid oxidation electrocatalysts. The activity can be further improved by manipulating the Pt(3)Pb-Pt core-shell structure. Combined experimental and theoretical studies suggest that the high activity from Pt(3)Pb and the Pt-Pb core-shell nanocrystals results from the elimination of CO poisoning and decreased barriers for the dehydrogenation steps. Therefore, the Pt(3)Pb and Pt-Pb core-shell nanocrystals can improve the performance of direct formic acid fuel cells at desired operating voltage to enable their practical application.