ABSTRACT
A laboratory study was conducted with the aim of evaluating and optimizing the environmental parameters of "landfarming", i.e., the disposal by biodegradation in soil of oily sludges generated in the refining of crude oil and related operations. Oil sludge biodegradation was monitored by CO2 evolution and by periodic analysis of residual hydrocarbons. The parameters studied were soil moisture, pH, mineral nutrients, micronutrients, organic supplements, treatment rate, teratment frequency, and incubation temperature. Oil sludge biodegradation was optimal at a soil water-holding capacity of 30 to 90%, a pH of 7.5 to 7.8, C:N and C:P ratios of 60:1 and 800:1, respectively, and a temperature of 20 degrees C or above. Addition of micronutrients and organic supplements was not beneficial; sewage sludge interfered with hydrocarbon biodegradation. Breakdown of the saturated hydrocarbon (alkane and cycloalkane) fraction was the highest at low application rates, but higher application rates favored the biodegradation of the aromatic and asphaltic fractions. An application rate of 5% (wt/wt) oil sludge hydrocarbon to the soil (100,000 liters/hectare) achieved a good compromise between high biodegradation rates and efficient land use and resulted in the best overall biodegradation rate of all hydrocarbon classes. Frequent small applications resulted in higher biodegradation than single large applications. Two 100,000-liter/hectare (255 barrels per acre) or four 50,000-liter/hectare oil sludge hydrocarbon applications per growing season seem appropriate for most temperate zone disposal sites.
Subject(s)
Bacteria/metabolism , Hydrocarbons/metabolism , Industrial Waste , Petroleum , Soil Microbiology , Biodegradation, Environmental , Hydrogen-Ion Concentration , Temperature , WaterABSTRACT
The biogenic acids 1-trans-2,3-epoxysuccinic acid and succinic acid accumulate in decationized refiner's blackstrap molasses shake cultures of Paecilomyces varioti Bainier. The maximum accumulation of 1-trans-2,3-epoxysuccinic acid occurred in a medium which contained Cu2+ and Fe3+ at concentrations of 1.0 and 2.0 mM, respectively. The maximum accumulation of succinic acid occurred in a culture medium which contained Cu2+ at a concentration of 0.01 mM and Fe3+ at a concentration of 1.0 mM.
Subject(s)
Mitosporic Fungi/metabolism , Succinates/biosynthesis , Copper/pharmacology , Culture Media , Epoxy Compounds/biosynthesis , Iron/pharmacology , MolassesABSTRACT
The biodegradation of South Louisiana (SL) crude oil and the effects of nitrogen, phosphorus, and iron supplements on this process were compared in a polluted (10,900 oil degraders per liter) and in a relatively clean (750 oil degraders per liter) littoral seawater sample taken along the New Jersey coast. Without supplements, the biodegradation of SL crude oil was negligible in both seawater samples. Addition of nitrogen and phosphorus allowed very rapid biodegradation (72% in 3 days) in polluted seawater. Total iron in this seawater sample was high (5.2 muM), and the addition of iron did not increase the biodegradation rate further. In the less polluted and less iron-rich (1.2 muM) seawater sample, biodegradation of SL crude oil was considerably slower (21% in 3 days) and the addition of chelated iron had a stimulating effect. Ferric octoate was shown to have a similar stimulating effect on SL crude oil biodegradation as chelated iron. Ferric octoate, in combination with paraffinized urea and octylphosphate, is suitable for treatment of floating oil slicks. We conclude that spills of SL crude and similar oils can be cleaned up rapidly and efficiently by stimulated biodegradation, provided the water temperatures are favorable.
