Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters










Database
Language
Publication year range
1.
Opt Lett ; 43(4): 879-882, 2018 Feb 15.
Article in English | MEDLINE | ID: mdl-29444017

ABSTRACT

We demonstrate the first Kerr lens mode-locked Yb:CaGdAlO4 (Yb:CALGO) thin-disk laser oscillator. It generates pulses with a duration of 30 fs at a central wavelength of 1048 nm and a repetition rate of 124 MHz. The laser emits the shortest pulses generated by a thin-disk laser oscillator, equal to the shortest pulse duration obtained by Yb-doped bulk oscillators. The average output power is currently limited to 150 mW by the low gain and limited disk quality. We expect that more suitable Yb:CALGO disks will enable substantially higher power levels with similar pulse durations.

2.
Opt Express ; 23(17): 21836-56, 2015 Aug 24.
Article in English | MEDLINE | ID: mdl-26368160

ABSTRACT

We present a detailed study of the carrier-envelope offset (CEO) frequency dynamics of SESAM modelocked thin disk lasers (TDLs) pumped by kW-class highly transverse multimode pump diodes with a typical M(2) value of 200-300, and give guidelines for future frequency stabilization of multi-100-W oscillators. We demonstrate CEO frequency detection with > 30 dB signal-to-noise ratio with a resolution bandwidth of 100 kHz from a SESAM modelocked Yb:YAG TDL delivering 140 W average output power with 748-fs pulses at 7-MHz pulse repetition rate. We compare with a low-power CEO frequency stabilized Yb:CALGO TDL delivering 2.1 W with 77-fs pulses at 65 MHz. For both lasers, we perform a complete noise characterization, measure the relevant transfer functions (TFs) and compare them to theoretical models. The measured TFs are used to determine the propagation of the pump noise step-by-step through the system components. From the noise propagation analysis, we identify the relative intensity noise (RIN) of the pump diode as the main contribution to the CEO frequency noise. The resulting noise levels are not excessive and do not prevent CEO frequency stabilization. More importantly, the laser cavity dynamics are shown to play an essential role in the CEO frequency dynamics. The cavity TFs of the two lasers are very different which explains why at this point a tight CEO frequency lock can be obtained with the Yb:CALGO TDL but not with the Yb:YAG TDL. For CEO stabilization laser cavities should exhibit high damping of the relaxation oscillations by nonlinear intra-cavity elements, for example by operating a SESAM in the roll-over regime. Therefore the optimum SESAM operation point is a trade-off between enough damping and avoiding multiple pulsing instabilities. Additional cavity components could be considered for supplementary damping independent of the SESAM operation point.

3.
Opt Lett ; 39(24): 6843-6, 2014 Dec 15.
Article in English | MEDLINE | ID: mdl-25503011

ABSTRACT

We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core kagome hollow-core photonic crystal fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average power, a pulse repetition rate of 7 MHz, and a pulse duration of 740 fs was spectrally broadened 16-fold while propagating in a kagome HC-PCF containing 13 bar of static argon gas. Subsequent compression tests performed using 8.4% of the full available power resulted in a pulse duration as short as 88 fs using the spectrally broadened output from the fiber. Compressing the full transmitted power through the fiber (118 W) could lead to a compressed output of >100 W of average power and >100 MW of peak power with an average power compression efficiency of 88%. This simple laser system with only one ultrafast laser oscillator and a simple single-pass fiber pulse compressor, generating both high peak power >100 MW and sub-100-fs pulses at megahertz repetition rate, is very interesting for many applications such as high harmonic generation and attosecond science with improved signal-to-noise performance.

4.
Opt Express ; 22(16): 18979-86, 2014 Aug 11.
Article in English | MEDLINE | ID: mdl-25320984

ABSTRACT

We present for the first time a SESAM-modelocked thin-disk laser (TDL) that incorporates two gain materials with different emission spectra in a single TDL resonator. The two gain media used in this experiment are the sesquioxide materials Yb:Lu2O3 and Yb:Sc2O3, which have their spectral emission peak displaced by ≈7 nm. We can benefit from a combined gain bandwidth that is wider than the one provided by a single gain material alone and still conserve the excellent thermal properties of each disk. In these first proof-of-principle experiments we demonstrate pulse durations shorter than previously achieved with the single gain material Yb:Lu2O3. The oscillator generates pulses as short as 103 fs at a repetition rate of 41.7 MHz and a center wavelength of around 1038 nm, with an average output power of 1.4 W. A different cavity layout provides pulses with a duration of 124 fs at an output power of 8.6 W. This dual-gain approach should allow for further power scaling of TDLs and these first results prove this method to be a promising new way to combine the record output-power performance of modelocked TDLs with short pulse durations in the sub-100 fs regime.

5.
Opt Lett ; 38(19): 3842-5, 2013 Oct 01.
Article in English | MEDLINE | ID: mdl-24081067

ABSTRACT

We present a semiconductor saturable absorber mirror (SESAM) mode-locked thin disk laser (TDL) based on Yb:CaGdAlO(4) (Yb:CALGO) generating 62 fs pulses, which is the shortest pulse duration achieved from mode-locked TDLs to date. The oscillator operates at a repetition rate of 65 MHz and delivers 5.1 W of average output power. The short pulse duration of our TDL in combination with the high intracavity peak power of 44 MW makes this oscillator attractive for intracavity table-top extreme nonlinear optics applications such as high harmonic generation and vacuum ultraviolet frequency comb generation. The current average power was limited by the quality of the Yb:CALGO disk. However, power scaling of Yb:CALGO TDLs to the multi-10-W range with short pulse durations (<100 fs) appears feasible in the near future by using thinner disks of better quality and further optimized SESAMs.

6.
Opt Express ; 21(21): 24770-80, 2013 Oct 21.
Article in English | MEDLINE | ID: mdl-24150320

ABSTRACT

We phase-stabilized the carrier-envelope-offset (CEO) frequency of a SESAM modelocked Yb:CaGdAlO4 (CALGO) thin disk laser (TDL) generating 90-fs pulses at a center wavelength of 1051.6 nm and a repetition rate of 65 MHz. By launching only 2% of its output power into a photonic crystal fiber, we generated a coherent octave-spanning supercontinuum spectrum. Using a standard f-to-2f interferometer for CEO detection, we measured CEO beats with 33 dB signal-to-noise ratio in 100 kHz resolution bandwidth. We achieved a tight lock of the CEO frequency at 26.18 MHz by active feedback to the pump current. The residual in-loop integrated phase noise is 120 mrad (1 Hz-1 MHz). This is, to our knowledge, the first CEO-stabilized SESAM modelocked TDL. Our results show that a reliable lock of the CEO frequency can be achieved using standard techniques in spite of the strongly spatially multimode pumping scheme of TDLs. This opens the door towards fully-stabilized low-noise frequency combs with hundreds of watts of average power from table-top SESAM modelocked thin disk oscillators.

SELECTION OF CITATIONS
SEARCH DETAIL
...