High Photoinitiating Efficiency of Benzothioxanthene-based Oxime Esters in Photopolymerization via Photocleavage and/or Single Electron Transfer under Visible Light and Sunlight.

In this work, six benzothioxanthene-based oxime esters were employed as photoinitiators for photopolymerization with visible light (LED) and sunlight. Their abilities to behave as Type I photoinitiators by mean of a photocleavage mechanism of oxime esters but also in multicomponent photoinitiating system with an iodonium salt (through an electron transfer mechanism) were both explored with the different structures. Due to their broad absorption spectra tailing up 600 nm, photoinitiating properties of the benzothioxanthene-based oxime esters were systematically tested under excitation with low-intensity LED light at wavelengths of 405 nm and 450 nm. Additionally, to the polymerization tests done under artificial light, different benzothioxanthene-based oxime esters were also investigated as solar photoinitiators and displayed a high reactivity in France (Western Europe) even in winter conditions. For the best candidates i.e. the most reactive structures, direct laser write experiments were carried out, evidencing the interest of these structures.

Development of a Borane-(Meth)acrylate Photo-Click Reaction.

In the development of 3D printing fuels, there is a need for new photoinitiating systems working under mild conditions and/or leading to polymers with new and/or enhanced properties. In this context, we introduce herein N-heterocyclic carbene-borane complexes as reagents for a new type of photo-click reaction, the borane-(meth)acrylate click reaction. Remarkably, the higher bond number of boranes relative to thiols induced an increase of the network density associated with faster polymerization kinetics. Solid-state NMR evidenced the strong participation of the boron centers on the network properties, while DMA and AFM showed that the materials exhibit improved mechanical properties, as well as reduced solvent swelling.

New Phosphine Oxides as High Performance Near- UV Type I Photoinitiators of Radical Polymerization.

Carbazole structures are of high interest in photopolymerization due to their enhanced light absorption properties in the near-UV or even visible ranges. Therefore, type I photoinitiators combining the carbazole chromophore to the well-established phosphine-oxides were proposed and studied in this article. The aim of this article was to propose type I photoinitiators that can be more reactive than benchmark phosphine oxides, which are among the more reactive type I photoinitiators for a UV or near-UV light emitting diodes (LED) irradiation. Two molecules were synthesized and their UV-visible light absorption properties as well as the quantum yields of photolysis and photopolymerization performances were measured. Remarkably, the associated absorption was enhanced in the 350-410 nm range compared to benchmark phosphine oxides, and one compound was found to be more reactive in photopolymerization than the commercial photoinitiator TPO-L for an irradiation at 395 nm.

Polymeric Iodonium Salts to Trigger Free Radical Photopolymerization.

In a significant breakthrough from classical molecular (i.e., nonpolymeric) iodonium salts in light-induced photochemistry, the synthesis and use of new safer polymeric iodonium salts are reported here. They are shown to be involved in charge transfer complexes (CTCs) while in interaction with a safe amino acid derivative (N-phenylglycine). Also, this study demonstrates i) the formation of CTCs between the iodonium (acceptor) and an aryl/alkyl amine (donor) through UV-vis measurements of the monomer, ii) the formation of radicals in electron spin resonance spin trapping experiments when the CTCs are irradiated by visible light (405 nm), and iii) their efficiency as a photoinitiator to polymerize three different acrylic monomers under LED irradiation at 405 nm under air and their application to 3D resolved laser writing of thick samples (3 mm). High reactivity for polymeric iodonium salts comparable with molecular ones is exhibited with the advantage of potential lower migration. To the best of the authors' knowledge, this is the first reported instance of polymeric iodonium salts acting as polymerization initiators.

3D Printing of Polydiacetylene Photocomposite Materials: Two Wavelengths for Two Orthogonal Chemistries.

Polydiacetylene (PDA) materials are appealing and gaining increasing research interest due to their outstanding chromatic transition and fluorescence enhancement effects upon exposure to various environmental stimuli. However, despite the photomask method, there are very few reports about the spatial controllable photopolymerization and subsequent 3D printing of PDA until now. Herein, for the first time, we reported the preparation of PDA photocomposite materials based on polyacrylate through the strategy of dual-wavelength polymerization and orthogonal chemistry. First, diacetylene (DA) monomers were homogeneously dispersed in acrylate resin. Then a violet light emitting diode (LED) (or laser diode) was used for the free radical polymerization of polyacrylate. Finally, UV irradiation was utilized to induce the 1,4-topopolymerization of PDA, which could show a successive blue to purple to red color transition in response to the gradient increment of temperature. Interestingly, instead of photomasks, we applied a 3D printing approach directly to this composite material and fabricated some macroscopic stereo patterns, which also illustrated thermochromic properties. This novel kind of functional photocomposite material would demonstrate a huge application prospect in many potential fields, including colorimetric sensing, information encryption, anticounterfeiting, and so on.

Charge-Transfer Complexes as New Inhibitors/Photoinitiators for On-Demand Amine/Peroxide Redox Polymerization.

Redox free-radical polymerizations have widespread applications but still clearly suffer from poor time control of the reaction. Currently, the workability (delay of the gel time) in redox polymerization after mixing is possible thanks to two main types of inhibitors (radical scavengers): phenols and nitroxides. Out of this trend, we propose in this work an alternative strategy for time delaying of the redox polymerization, which is based on charge-transfer complexes (CTCs). Thanks to iodonium salt complexation, the amine (here 4-N,N-trimethylaniline) is proposed to be stored in a CTC equilibrium and is slowly released over a period of time (as a result of the consumption of free amines by peroxides). This alternative strategy allowed us to double the gel time (e.g., from 60 to 120 s) while maintaining a high polymerization efficiency (performance comparable to reference nitroxides). More interestingly, the CTCs involved in this retarding strategy are photoresponsive under visible LED@405 nm and can be used on demand as photoinitiators, allowing (i) spectacular increases in polymerization efficiencies (from 50 °C without light to 120 °C under mild irradiation conditions); (ii) drastic reduction of the oxygen-inhibited layer (already 45% C=C conversion at a 2 µm distance from the top surface) compared to the nonirradiated sample (thick inhibited layer of more than 45 µm); and (iii) external control of the redox polymerization gel time due to the possible light activation.

New Synthetic Route to an Highly Efficient Photoredox Catalyst by Mechanosynthesis.

Photoredox catalysis based on the [Cu(neo)(DPEphos)]BF4 copper complex allowed getting a significant improvement of the polymerization performances (e.g., thick samples, coatings...) compared to that obtained with other benchmarked photoinitiators in both cationic (CP) and free radical polymerizations (FRP). Nevertheless, as for other copper complexes classically used as photoinitiators in polymer science, the synthesis of these complexes is carried out in a solvent; this fact remains an obstacle to their widespread use because of the cost associated with the use of a solvent and the complex synthesis procedure. In the present study, on the contrary, an outstanding efficient mechanosynthesis of [Cu(neo)(DPEphos)]BF4-purity ≥95% outranking the previous Cu(I) mechanosynthesis-allowed (i) to divide the synthesis time by 170-fold (as only 5 min is necessary to get the complex), (ii) to lower the environmental impact and cut the synthetic costs associated with solvent usage, and (iii) to access a new Cu(I) complex with a counteranion that is impossible to introduce under the traditional chemistry methods (e.g., I-). Reactivities of the mechanosynthesized copper complexes in resins (FRP and CP) confirmed the very high purity of the obtained copper complex by 1H nuclear magnetic resonance spectroscopy and high-resolution electrospray ionization mass spectrometry.

A novel photoinitiating system producing germyl radicals for the polymerization of representative methacrylate resins: Camphorquinone/R3GeH/iodonium salt.

OBJECTIVES: The aim of our study is to find an amine free photoinitiating system (PIS) for the polymerization of representative dental methacrylate resins. A photoinitiating system (PIS) based on camphorquinone (CQ)/triphenylgermanium hydride/diphenyl iodonium hexafluorophosphate is proposed and compared to the conventional CQ/amine couple. The polymerization monitoring of thin (∼20µm) and thick (1.4mm) samples of a bisphenol A-glycidyl methacrylate (Bis-GMA)/triethyleneglycol dimethacrylate (TEGDMA) blend (70%/30% w/w) and of a urethane dimethacrylate (UDMA) upon exposure to a commercial blue LED centered at 477nm under air or in laminate is described. Finally, the impact of the photoinitiating system composition on the final polymer color is evaluated in detail. METHODS: FTIR and DSC experiments are used to record the photopolymerization profiles. ESR spectrometry and steady state photolysis are used to detect the produced radicals. Color measurements are carried out to determine the key parameters in the bleaching of the different dental formulations. RESULTS: The efficiency of the newly proposed PISs for the photopolymerization of BisGMA/TEGDMA and UDMA for thin (20µm) or for thick (1.4mm) samples upon exposure to a dental blue LED under air is excellent. It is noticeably higher than that of the CQ/amine reference couple. Excellent bleaching properties are also observed under irradiation in presence of the new PISs. A good correlation is found between the sample bleaching and the amount of Ph3GeH in the formulation. The excited state processes could be established. The overall chemical mechanisms for the initiation step were also clarified.

Photochemistry and radical chemistry under low intensity visible light sources: application to photopolymerization reactions.

The search for radical initiators able to work under soft conditions is a great challenge, driven by the fact that the use of safe and cheap light sources is very attractive. In the present paper, a review of some recently reported photoinitiating systems for polymerization under soft conditions is provided. Different approaches based on multi-component systems (e.g., photoredox catalysis) or light harvesting photoinitiators are described and discussed. The chemical mechanisms associated with the production of free radicals usable as initiating species or mediators of cations are reported.

Hydrophilic/hydrophobic film patterning by photodegradation of self-assembled alkylsilane multilayers and its applications.

While the photopatterning of self-assembled monolayers (SAMs) has been extensively investigated, much less attention has been given to highly ordered multilayer systems. By being both thicker (0.5-2 µm) and more stable (cross-linked) than SAMs, patterned hybrid multilayers lend themselves more easily to the development of technology-relevant materials and characterization. This paper describes a facile two-step UV approach to patterning an alkylsilane multilayer by combining photoinduced self-assembly for multilayer synthesis and photodegradation through a mask for creating patterns within the film. In this second stage, a spatially resolved removal of the alkyl tail via a photooxidation mechanism took place, yielding regular and uniform silica microdomains. The result was a regular array of features (alkylsiloxane/silica) differing in chemical composition (hybrid/inorganic), ordering (crystal-like/disordered), and wettability (hydrophobic/hydrophilic). Such a photopatterned film was of utility for a range of applications in which water droplets, inorganic crystals, or aqueous polymer dispersions were selectively deposited in the hydrophilic silica microwells.

Depth characterization of photopolymerized films by confocal Raman microscopy using an immersion objective.

The depth characterization of photopolymer films by confocal Raman microscopy is often troublesome due to refraction effects. To minimize these effects, we used an oil immersion objective and a method was developed to avoid penetration of the oil without damaging the sample surface. Since the surface may be sticky if oxygen in the air inhibits the photopolymerization, a protective layer could not be put onto the film. Therefore, the method consists in using a thin polypropylene foil as substrate for the coating and placing the sample upside down under the objective. In this manner, the immersion oil could be deposited on top of the polypropylene. The advantage of this setup is that the oil, polypropylene substrate, and photopolymer film have close refractive indices. Basic calculations showed that the depth resolution is hardly affected in that configuration and double-bond conversion profiles could be plotted as a function of reliable nominal depth. The validity of the methodology was confirmed by experiments carried out with a dry metallurgical objective on the sample surface, face up, where refraction effects are still minor. In addition, infrared spectroscopy, which was used to follow the photopolymerization, corroborated the Raman conversion of the films over their thickness. The confocal Raman microscopy method can be applied to various photopolymerized systems to characterize their behavior towards oxygen inhibition and other heterogeneities in conversion arising from inner filter effects or interactions between additives for instance.

Theoretical and experimental study of the Norrish I photodissociation of aromatic ketones.

A set of selected acetophenone derivatives was investigated using absorption and emission spectroscopy, laser flash photolysis and DFT calculations. The triplet state lifetimes and the activation energy of the cleavage reaction were measured. Computed triplet-triplet absorption spectra were found in very good agreement with the experimental ones. Bond dissociation energies, activation energies, partial charges, ground state geometries were calculated. The transition state theory TST was successfully used to calculate the cleavage rate constants: a very good correlation was found between the experimental and the calculated values. It is found that the entropy change influences the preexponential factor. This study also points out the role of the partial charges in the transition state, although this effect alone does not account for the reaction rate constants.