Volatile Profiling of Spirulina Food Supplements.

Spirulina, a cyanobacterium widely used as a food supplement due to its high nutrient value, contains volatile organic compounds (VOCs). It is crucial to assess the presence of VOCs in commercial spirulina products, as they could influence sensory quality, various processes, and technological aspects. In this study, the volatile profiles of seventeen commercial spirulina food supplements were determined using headspace solid-phase microextraction (HS-SPME), coupled with gas chromatography-mass spectrometry (GC-MS). The identification of volatile compounds was achieved using a workflow that combined data processing with software tools and reference databases, as well as retention indices (RI) and elution order data. A total of 128 VOCs were identified as belonging to chemical groups of alkanes (47.2%), ketones (25.7%), aldehydes (10.9%), alcohols (8.4%), furans (3.7%), alkenes (1.8%), esters (1.1%), pyrazines (0.8%), and other compounds (0.4%). Major volatiles among all samples were hydrocarbons, especially heptadecane and heptadec-8-ene, followed by ketones (i.e., 4-(2,6,6-trimethyl-1-cyclohexen-1-yl)-3-buten-2-one, ß-ionone, 2,2,6-trimethylcyclohexan-1-one), aldehydes (i.e., hexanal), and the alcohol oct-1-en-3-ol. Several volatiles were found in spirulina dietary supplements for the first time, including 6,10-dimethylundeca-5,9-dien-2-one (geranylacetone), 6,10,14-trimethylpentadecan-2-one, hept-2-enal, octanal, nonanal, oct-2-en-1-ol, heptan-1-ol, nonan-1-ol, tetradec-9-en-1-ol, 4,4-dimethylcyclohex-2-en-1-ol, 2,6-diethylpyrazine, and 1-(2,5-dimethylfuran-3-yl) ethanone. The methodology used for VOC analysis ensured high accuracy, reliability, and confidence in compound identification. Results reveal a wide variety of volatiles in commercial spirulina products, with numerous newly discovered compounds, prompting further research on sensory quality and production methods.

The Influence of Sepsis on the Molecular Structure of Bones: A Fourier Transform Infrared Spectroscopy Study.

Fourier transform infrared spectroscopy was used to evaluate the molecular structure of bone tissues of patients who underwent revision of total hip and shoulder arthroplasty. The intensity increase of the spectral bands in the region of 3000-2850 cm-1 provided information about the increase of the lipophilic environment, which supported the formation of aggregates and amyloid protein formation. The appearance and the intensity increase of the "marker band" at 1744 cm-1 suggested protein peroxidation and inflammation progression. The shift of the amide I and amide II absorption bands from 1650 cm-1 and 1550 cm-1, respectively, to lower frequencies was related to changes of collagen conformation structure from α-helix to ß-sheet and random coil. The appearance and shifts of the new bands in the region 1200-900 cm-1 were related with the increasing of glycosylation upon inflammation. Important was also the disappearance of the hydroxyapatite vPO43- absorption bands at the spectral regions 1200-900 cm-1 and 550-650 cm-1 indicated the osteolysis development. Moreover, the formation of corrosive metallic implants confirmed the effect of oxidative stress on the development of periprosthetic joint infection.

Protein-resistant cross-linked poly(vinyl alcohol) micropatterns via photolithography using removable polyoxometalate photocatalyst.

In the last years, there has been an increasing interest in controlling the protein adsorption properties of surfaces because this control is crucial for the design of biomaterials. On the other hand, controlled immobilization of proteins is also important for their application as solid surfaces in immunodiagnostics and biosensors. Herein we report a new protein patterning method where regions of the substrate are covered by a hydrophilic film that minimizes protein adsorption. Particularly, poly(vinyl alcohol) (PVA) cross-linked structures created by an especially developed photolithographic process are proved to prevent protein physisorption and they are used as a guide for selective protein adsorption on the uncovered areas of a protein adsorbing substrate such as polystyrene. The PVA cross-linking is induced by photo-oxidation using, as a catalyst, polyoxometalate (H3PW12O40 or α-(NH4)6P2W18O62), which is removed using a methyl alcohol/water mixed solvent as the developer. We demonstrate that the polystyrene and the cross-linked PVA exhibit dramatically different performances in terms of protein physisorption. In particular, the polystyrene areas presented up to 130 times higher protein binding capacity than the PVA ones, whereas the patterning resolution could easily reach dimensions of a few micrometers. The proposed approach can be applied on any substrate where PVA films can be coated for controlling protein adsorption onto surface areas custom defined by the user.

All-organic sulfonium salts acting as efficient solution processed electron injection layer for PLEDs.

Herein we introduce the all-organic triphenylsulfonium (TPS) salts cathode interfacial layers (CILs), deposited from their methanolic solution, as a new simple strategy for circumventing the use of unstable low work function metals and obtaining charge balance and high electroluminescence efficiency in polymer light-emitting diodes (PLEDs). In particular, we show that the incorporation of TPS-triflate or TPS-nonaflate at the polymer/Al interface improved substantially the luminous efficiency of the device (from 2.4 to 7.9 cd/A) and reduced the turn-on and operating voltage, whereas an up to 4-fold increase in brightness (∼11 250 cd/m(2) for TPS-triflate and ∼14 682 cd/m(2) for TPS-nonaflate compared to ∼3221 cd/m(2) for the reference device) was observed in poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-2,1',3-thiadiazole)] (F8BT)-based PLEDs. This was mainly attributed to the favorable decrease of the electron injection barrier, as derived from the open-circuit voltage (Voc) measurements, which was also assisted by the conduction of electrons through the triphenylsulfonium salt sites. Density functional theory calculations indicated that the total energy of the anionic (reduced) form of the salt, that is, upon placing an electron to its lowest unoccupied molecular orbital, is lower than its neutral state, rendering the TPS-salts stable upon electron transfer in the solid state. Finally, the morphology optimization of the TPS-salt interlayer through controlling the processing parameters was found to be critical for achieving efficient electron injection and transport at the respective interfaces.

Green asymmetric synthesis: ß-amino alcohol-catalyzed direct asymmetric aldol reactions in aqueous micelles.

The ability of chiral ß-amino alcohols to catalyze the direct asymmetric aldol reaction was evaluated for the first time in aqueous micellar media. A family of cheap and easily accessible ß-amino alcohols, obtained in one step from naturally occurring amino acids, was shown to successfully catalyze the asymmetric aldol reaction between a series of ketones and aromatic aldehydes. These aldol reactions furnished the corresponding ß-hydroxy ketones with up to 93% isolated yield and 89% ee. (S)-2-phenylglycinol and Triton X-100 proved to be the best organocatalyst and surfactant, respectively.

Photochemically-induced acid generation from 18-molybdodiphosphate and 18-tungstodiphosphate within poly(2-hydroxyethyl methacrylate) films.

The capability of ammonium 18-molybdodiphosphate, (NH(4))(6)P(2)Mo(18)O(62) (Mo(18)(6-)), and ammonium 18-tungstodiphosphate, (NH(4))(6)P(2)W(18)O(62) (W(18)(6-)), to photochemically generate acid within films of a polymer with hydroxylic functional groups (namely, within poly(2-hydroxyethyl methacrylate) (PHEMA) films) is demonstrated. Upon UV irradiation, both 2:18 polyoxometalates (POMs) investigated are reduced with concomitant oxidation of PHEMA and generation of acid, which subsequently catalyzes the cross-linking of PHEMA. The photoacid generation is mainly evidenced by monitoring the protonation of an appropriate acid indicator (4-dimethylamino-4'-nitrostilbene) with UV spectroscopy and by photolithographic imaging experiments. By comparing the efficiency of both POMs to induce acid-catalyzed cross-linking of PHEMA under similar conditions, the W(18)(6-) ion is found to be more efficient in photoacid generation than the Mo(18)(6-) ion. Imaging of the POM-containing PHEMA films through UV photolithographic processing is demonstrated. In that process, both POMs can be entirely leached during the development step by using pure water as a developer, resulting in patterned PHEMA films. This characteristic renders the investigated POMs attractive materials for applications, especially in the area of biomaterials, where removal of the photoacid generator from the film at the end of the process is desirable.

Biocompatible photolithographic process for the patterning of biomolecules.

A new approach for the patterning of biomolecule layers is introduced based on the design of a new photoresist material with biocompatible lithographic processing requirements. The photoresist is based on poly(t-butyl acrylate), which allows positive imaging with very dilute basic solutions, tolerable by selected biomolecules used in immunoanalysis. Sensitivity at lambda>300 nm is obtained using a suitable sulfonium salt photoacid generator. Thermal steps also take place under conditions tolerable by biomolecules. Lithographic results on Si wafer substrates show resolution capabilities for equal lines/spaces, down to the range of 5-10 microm under biocompatible conditions. The process is also used on substrates of different geometries, including inner capillary surfaces. The patterning of the inner surface of a polystyrene capillary with mouse IgG is reported to demonstrate the principles of the above approach.